Konzolni regal RAX

RAX

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Ultrasonic cleaner degreasing installation RAX-8 The solvent cleaning machine consists of two parts: 1) The ASD; 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with an overhead vapor zone featuring condensers and cooling coils. The condensate is continuously returned to tank 1 via a water separation system and the contaminated BEVO thinner from tank 3 is automatically pumped across. Tank capacities: Tank 1: 40.5-liter immersion tank temperature: 76°C-79°C Tank 2: 75-liter immersion tank temperature: 22°C-30°C Tank 3: 40.5-liter immersion tank (vapor tank) temperature: 77°C-82°C Hnodew Ewl Uepfx Abxsn Tank 4: empty (evaporation/cooling) temperature: ambient temperature Distillation column max. 60 liters temperature: 76°C-82°C The machine has been inspected by a certified electrician

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Hnodpfx Asucfwpebxon

Stanje: novo, as well as other types, as a package Hnodpjf Ddzqsfx Abxen

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Hjdsdy Hm Depfx Abxenn Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance Hnodpfx Absh Ek Daexen - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: Hedpoiu Smbefx Abxjnn 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Krauss Maffei KM 250-900B Hedpfx Aofp U Hvsbxonn Clamping force: 250 tonnes Year of manufacture: 1987 Shot weight: 470 g Tie bar spacing: 630 x 560 mm

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Žaga Graule ZS 170, leto 1996, 2.000 EUR Rezkar Graule 6/250 - 160, leto 2008, 2.700 EUR Vrtljivi zalogovnik za krila in okvirje, 500 EUR Hnsdpfxswp Stzs Abxsn Valjčna proga dolžine 7,5 m kot zalogovnik za okna pred stekliščem, 600 EUR

Stanje: novo, Leto izdelave: 2024, Système automatique de mesure de longueur et de positionnement pour toutes les scies à tronçonner STROMAB ainsi que pour toutes les machines similaires d’autres fabricants. Il sert à la fois de butée et au positionnement des pièces. Composé de: Profilé en aluminium 105 x 90 mm, anodisé Entraînement par courroie crantée 32 mm, renforcée avec fil d’acier Moteur pas à pas 6 Nm, multi-tension 115-230 V – 50/60 Hz Précision de répétition +/- 0,1 mm Vitesse de positionnement 60 m/min. Commande Type SMART 7 Hnodpfx Abjxraucoxon avec écran tactile 7 pouces Mode d’usinage absolu et incrémental 8 valeurs standards préréglées 2 versions logicielles avec différents niveaux d’optimisation optionnellement disponibles. ZM 415 – Longueur de travail utile 4.500 mm ZA333 – Table à rouleaux 4.500 x 280 mm, diamètre rouleaux 32 mm ZA341 – Support frontal 4.500 x 260 mm ZA373 – Câble de verrouillage pour scie à tronçonner existante

Stanje: zelo dobro (rabljeno), Height: approx. 2000-4500 mm Width: approx. 1130 mm Usable depth: 1 x 1000 mm Upright load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base Single-sided design Bolted base profiles Made from hot-rolled IPE sections Finish: high-quality industrial paint RAL 5010 Hsdpfxep Dukqs Abxsnn Cantilever arms freely adjustable in 100 mm increments Racking uprights: base and cantilever arms bolted Increase in storage capacity with reduced floor space Organized storage of long goods Price: €400/net per upright, incl. We will assemble your custom racking system. Feel free to contact us. We also buy used racking. Please send photos and dimensions—we’ll make you an offer. Contact: Brennholz Blum - Mr. Dominik Blum Upon request, we can also deliver your racking. If you have any questions, just call or write us.