SPAJALKA ZA TESTENINE
RAUTE C2000 - 2615 - 1R70003

Name: RAUTE C2000 - 2615 - 1R70003
Brand: RAUTE
Availability: InStock

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Moglia

SPAJALKA ZA TESTENINE RAUTE C2000 - 2615 - 1R70003

Podatki o stroju

Oznaka stroja:: SPAJALKA ZA TESTENINE

Proizvajalec:: RAUTE

Model:: C2000 - 2615 - 1R70003

Stanje:: dober (rabljeno)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Via dell’Artigianato 1/3, 46024 Moglia, Italia

Pokliči

Podrobnosti ponudbe

ID oglasa:: A18200826

Posodobitev:: nazadnje dne 10.01.2025

Opis

The machine consists of:

1. Infeed conveyor belt for sheets to be joined
- Dimensions: 3200 x 2000 mm
- Power: 2 kW
2. Lifting table
- Dimensions: 3200 x 2000 mm
- Load capacity: 5000 kg
- Power: 4 kW
3. Conveyor belt for loading empty pallets
- Dimensions: 3200 x 2000 mm
- Power: 2 kW
4. Vacuum sheet loader for optimization VTSA 3800
- Length: 3200 mm
- Infeed speed: 55 m/min
- Power: 5 kW
5. Roller infeed unit VTSM 3800
- Length: 3200 mm
- Power: 1.5 kW
6. Angular transfer unit with rollers and belts KS4 - 5400
- Length: 3200 mm
- Width: 2000 mm
- Power: 2+2 kW
7. Conveyor belt for sheet alignment on the side guide PKP
- Length: 3000 mm
- Power: 4 kW
8. Conveyor belt with chains for sheet clamping
- Length: 2000 mm
- Power: 5.5 kW
9. Camera for reading material to optimize OK P
- Analyzes the sheet and sends cutting commands (head cut, tail cut, hole cut, etc., according to operator-set parameters)
- Sheet thickness control unit
10. Dough cutting unit
- Hydraulic control
11. Waste material selection group (integrated on an under-belt)
12. Joining group with heat-sealable wire
- Number of joining wires: 6
13. Cross-cutting machine for sizing joined sheets
- Hydraulic control
14. Stacker for discharging joined sheets
- Length: 3200 mm
- Width: 2000 mm
- Power: 3 kW
15. Lifting table
- Length: 3200 mm
- Width: 2000 mm
- Load: 5000 kg
- Power: 4 kW
16. Conveyor belt for pallet discharge
- Length: 3200 mm
- Width: 2000 mm
- Power: 2 kW
17. Conveyor belt for loading empty pallets
- Length: 3200 mm
- Width: 2000 mm
- Power: 2 kW
18. Discharge belt for cutting waste
- Power: 4 kW
Klodpfx Abjvnri Isxeu
19. Mechanical shredder for scrap processing

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2025

5 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Sporočilo*

Ime*

E-pošta*

Telefon

Podjetje

Poštna številka in krajZemljišče

Sem trgovec

Prejmite ponudbe za podobne stroje

Opomba: Vaše povpraševanje bo posredovano vsem prodajalcem v kategoriji strojev. S tem lahko prejmete zelo veliko ponudb.

Izjava o varstvu podatkov

Telefon & Faks

+39 0376 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Sükösd

309 km

RP Sušilnik lesa
RPNF28

47.000 €

~~60.000 €~~

Fiksna cena plus DDV

Pokliči

Mali oglas

Stroj za proizvodnjo vijakov EW MENN GW 63

Calolziocorte

432 km

Stroj za proizvodnjo vijakov
EW MENNGW 63

Pokliči

Stanje: novo, Leto izdelave: 2024, dolžina gredi pod glavo: 80 mm, dolžina navoja: 55 mm, največja hitrost vožnje: 480 mm/min, Flat Die Thread Rolling Machine E.W. MENN GW63 Fully refurbished to as-new condition. New guides, vibrator, and vibratory discharge system. New electrical system with inverter and PLC. Thread size: M8x80/55 mm. Ksdpfxot Uucas Abxjlu Throughput: 480 pcs/min. Threading diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Machine available for inspection and testing at HBR srl - Calolziocorte (LC).

Poglej podrobnosti

Mali oglas

Digitalni tiskalnik konica minolta MGI JET VARNISH 3D EVO F.TO 75X120

Falconara Marittima

309 km

Digitalni tiskalnik
konica minoltaMGI JET VARNISH 3D EVO F.TO 75X120

150.000 €

VB plus DDV

Pokliči

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, loèitev (maks.): 360 DPI (pik na palec), širina papirja (min.): 290 mm, širina papirja (maks.): 750 mm, višina papirja (min.): 360 mm, največja višina papirja: 1.200 mm, Digitalni sitotiskarski stroj s skupino za hot foiling. Leto namestitve: 2019. Minimalni tiskalni format: 29x42 cm, maksimalni: 75x120 cm. Odlično stanje. Kljdpjxrz T Tjfx Abxeu

Poglej podrobnosti

Mali oglas

Bio QZ900 / Univerzalni drobilnik MeWa Recycling Anlagen Bio QZ900

Grosseto

486 km

Bio QZ900 / Univerzalni drobilnik
MeWa Recycling AnlagenBio QZ900

28.000 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Mobilni obrat za drobljenje Doppstadt Inventhor Type 6

Calbe (Saale)

684 km

Mobilni obrat za drobljenje
DoppstadtInventhor Type 6

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 208 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 24.740 kg, transportna širina: 2.540 mm, transportna dolžina: 9.141 mm, transportna višina: 3.604 mm, moč: 260 kW (353,50 KM), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal conveyor: belt length 2,900 mm; belt width 800 mm - Centrally positioned wear plates - 24 V electric control system – additional electric pump to operate the following functions when the engine is off: “Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper” - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Service ladder - Toolbox - Audible start-up warning - Doppstadt Telematic System - Paint finish: RAL2011 deep orange Optional equipment: Kledpfoxd T Hcex Abxsu - 260 kW EV driveline - 3-axle drawbar running gear unit - Shredding system Size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic drive - 350 mm hopper extension, watering both sides - 7 m rear discharge conveyor - Neodymium overband magnet - Frame for 7 m overband magnet Delivery date to be agreed

Poglej podrobnosti

Mali oglas

Popolna linija za proizvodnjo vezanega lesa Angelo Cremona SFH 2700

Moglia

345 km

Popolna linija za proizvodnjo vezanega lesa
Angelo CremonaSFH 2700

Pokliči

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Complete line composed of: 1. Angelo Cremona Peeling Machine – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Splicer – description and photos available in the listings PEELING PLANT Composed of: Centering Loader 1. Model CE08 2. Manufactured by Angelo Cremona 3. Positions logs for loading into the peeling machine 4. Power supply 400Vac/50Hz – 50kW Max. hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Weight: kg Maximum dimensions: 600x300x400 5. Output capacity: 4 logs per minute Peeling Machine 1. Model SFH870 2. Manufactured by Angelo Cremona 3. Produces a ribbon of wood by turning the log 4. Power supply 400Vac/50Hz – 240kW Max. hydraulic pressure: 100 bar Compressed air consumption: 10 L/min Maximum dimensions: 600x400x300 5. Output capacity: 50 cubic meters per shift Klsdpfjvm An Eox Abxju Cutting and Selection Line 1. Model TSR27 2. Manufactured by Angelo Cremona 3. Conveys the peeled ribbon to the cutting unit for optimized sheet cutting 4. Power supply 400Vac/50Hz – 70kW Max. hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Maximum dimensions: 300x200x200 5. Output capacity: 50 cubic meters per shift Sorting Line and Vacuum Unloader 1. Model LTR27 2. Manufactured by Angelo Cremona 3. Separates and stacks recovery sheets from full size sheets 4. Power supply 400Vac/50Hz – 180kW Compressed air consumption: Maximum dimensions: 300x1300x500 5. Output capacity: 50 cubic meters per shift

Poglej podrobnosti

Mali oglas

Mantua

345 km

Rezalna žaga
StromabPS 50/F

Pokliči

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 145 mm, največja širina rezanja: 510 mm, skupna masa: 400 kg, premer ekstrakcijske šobe: 150 mm, vrtljajska hitrost (min.): 2.800 obr/min, moč: 5,5 kW (7,48 KM), STROMAB PS 50/F Crosscut Swing Saw - Brand NEW Specification: • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor shaft diameter: 30 mm Kodperdwm Tjfx Abxolu • Motor speed: 2,800 rpm • Max. cutting width: 510 mm • Max. cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • CE compliant Additional information: • The tables shown in the pictures are included with the machine (2 x 2.0 m) • Available within 7–10 working days • Price does not include VAT or transport costs

Poglej podrobnosti

Mali oglas

Kanzach

464 km

Linija za spajanje prstov
NKT

Pokliči

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Klodpog D Ugkefx Abxeu Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Poglej podrobnosti

Mali oglas