Stroj za rezanje niti

RAGNAR HYDR 5-16

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Longueur de tournage: 3 000 mm Diamètre de tournage au-dessus du chariot transversal: 520 mm Course de l’axe X : 600 mm Course de l’axe Y : 150 mm Course de l’axe Z : 3 150 mm Diamètre de tournage : 520 mm Longueur de tournage : 3 000 mm Commande : SIN 840 D Siemens Axe Z : 3 150 mm Avance axe Z : 1 - 40 000 mm/min Rapide axe Z : 40,00 m/min Axe X : 600 mm Avance axe X : 1 - 30 000 mm/min Rapide axe X : 30,00 m/min Broche principale S1 Plage de vitesse de broche : 1 - 3 300 tr/min Puissance d’entraînement à charge 100 % : 29,00 kW Nez de broche DIN 55026 - taille A11 Diamètre de broche au palier avant : 160 mm Alésage de broche : 115 mm Axe C : 360 x 0,001 ° Broche de fraisage S2 Montage d’outil : Capto C6 Vitesse en continu : 1 - 6 000 tr/min Axe Y : -100 / +150 mm Axe B : -110 / +110 ° Magasin d’outils 100 postes Puissance totale requise : 145 kW Fodpexpfd Dofx Aflsft Poids de la machine env. 24 t

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - VLAKNOSTNI LASERSKI REZALNI STROJ S PALATNIM MENJALCEM IN SISTEMOM ZA NALAGANJE/RAZLAGANJE POTOVANJE X-OSI: 4064 mm POTOVANJE Y-OSI: 2032 mm POTOVANJE Z-OSI: 70 mm DELOVNO PODROČJE: 4000 x 2000 mm Ffsdpfewwxuzox Aflet DOVOLJENA OBREMENITEV NA MIZI: 1270 kg VIR: FIBER 6000; 6000 W KRMINA ENOTA: ByVISION DODATKI: PRENOSNI ROČNI KOLESNI UPRAVLJALNIK; ODSESAVALNIK DIMA OPOMBA: S SISTEMOM ANTIL SPA 4020, letnik 2021

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Ffedjv Scrbopfx Afljt

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) Ffjdpfx Afowbh Ifolst ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: rabljeno, Leto izdelave: 1994, Technical Details: Number of spindles: 8 Fsdpfxjl Su Rxe Aflsft Spindle passage: 32 mm Item: Cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AF32 S DNT Year of manufacture: 1994 Eight-spindle automatic lathe with 8 main spindles Max. nominal bar capacity: D=32 mm Control system: Siemens SIMATIC S7 Electronic cam controller: Balluff Gripper in position 8 for rear-side machining CNC cross slide at position 6 CNC cross slide at position 7 Workpiece conveyor belt KSS cooling system (Schimpke) Chip conveyor with magnetic separator Thread-cutting clutches The tooling shown may differ from the scope of delivery! Please contact us for further information and photos via email (at) or *

Stanje: rabljeno, Leto izdelave: 2002, Swing diameter: 820 mm Turning length: 2,000 mm Control: SIN 810 D Center height over flat bed: 400 mm Swing diameter over cross slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed gearbox stage 1: 6.40 - 376 rpm Spindle speed gearbox stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose to DIN 55027 - size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Fodpfx Afew Dvipjljft Tailstock quill taper: MT 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight approx.: 11.00 t Space requirement approx.: 6.00 x 3.00 x H2.60 m Controls: SIEMENS Sinumerik 810D, chip conveyor, tailstock, extraction system, 2 steady rests. Spindle bearing refurbished by the manufacturer in 04/2023. Machine can be inspected under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, 5-osni obdelovalni center - univerzalni DECKEL MAHO DMU 70 EVO Leto izdelave: 2002 Krmiljenje: MillPlus iT Heidenhain Fodoxf Hlhspfx Afleft Delovne ure stroja: 33.289,6 h Delovne ure vretena: 10.533,5 h Tehnični podatki: x-hod: 750 mm y-hod: 600 mm z-hod: 520 mm Glavno vreteno: Območje vrtljajev glavnega vretena: 20 - 18.000 min⁻¹ Pogonska moč glavnega vretena: 35 / 25 kW Maks. navor: 130 / 87 Nm NC rotacijsko-nagibna miza: Vpenjalna površina mize: 700 x 500 mm Območje nagiba osi B: 180 ° Obračanje v osi C: 360 ° maks. obremenitev mize: 350 kg Centrična odprtina: 30 H6 mm T-utor: 7x 14H7 x 63 mm Območje vrtljajev mize: 21,5 min⁻¹ Orodni magazin: Število orodnih mest: 32 pozicij maks. dolžina orodja: 315 mm maks. premer orodja: 105 mm maks. premer orodja pri prosti sosednji posodi: 130 mm maks. teža orodja: 6 kg

Stanje: rabljeno, Leto izdelave: 1987, Technical details: Ffsdpfxemf Aw Ae Afljt Number of spindles: 8

Stanje: dober (rabljeno), Leto izdelave: 1995, Stroj je v dobrem delovnem stanju. Fjdpfx Aouzimnofleft Krmilna enota TNC 426.

Stanje: dober (rabljeno), Leto izdelave: 2004, TRAUB TX8H CONTROL Weight: 3500 kg Dimensions (LxWxH): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5600 / 4000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> Suitable for chip-forming metal and plastic machining with defined cutting edges using appropriate tools. --> For clamping in jaw chucks from size 160 up to approx. 250. --> For machining bar stock up to a diameter of 42 or 65 mm, respectively. --> With special EHS version workpiece removal unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle head DIN 55026, size: A5 --> Chuck diameter: 160-175 mm / 200-250 mm --> Max. turning diameter: 275 mm --> Clearance above spindle center: 35 mm --> Max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm Ffsdpfx Aewwl Iuoflst --> Swing diameter over bed: 520 mm --> Tool Carrier Tool holders for cylindrical shank DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time, 1st position: 0.5 sec. --> Indexing time, each subsequent position: 0.15 sec. --> Feed Drives X-Axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> Rapid traverse/Path speed: 15 m/min --> Z-Axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 18 m/min --> Y-Axis: --> Slide travel: ±35 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 10 m/min --> C-Axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electronic resolution: 0.001 degree --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid retraction travel: 280 mm --> Quill clamping force at 55 bar: 8600 N --> Mounting per DIN 228: Mk 4 --> Steady Rest Clamping range: 8 - 95 mm --> Parts Removal Device Max. part length: 250 mm --> Max. part weight: 3 kg