Polnilno-zapiralni monoblok za steklenice - MONOBLOCK 5

ProFruit Machinery MONOBLOCK 5

Leto izdelave: 2026, stanje: novo, The washing system with hammer mill for fruit and vegetables is constructed entirely from stainless steel and is equipped with a sorting grid, a washing tank, and a conveyor belt. The produce is loaded into the water, where it undergoes a preliminary wash. It is then transported further via the conveyor belt, which cleans the fruit thoroughly with fresh water. After cleaning, the produce enters the mill, where it is processed to the desired mash consistency using the preferred screen. • Easy to clean • Low maintenance requirements • Belt speed is continuously adjustable in both directions • Equipped with 2 swivel castors • Equipped with 2 fixed castors Technical specifications: • Rated output: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4“ • Connection for cleaning: G ½“ • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg Djdpfev Srgusx Apwjwc

Stanje: novo, številka stroja/vozila: 190040019, Inclined conveyor (4,000 x 390 mm) Inclined conveyor with direct drive and PU/PVC belt Dwedpfx Astvfb Nopwec

Stanje: novo, Washing plant WA LC40 with Raetz mill RM40 for belt presses EBP500, EBP650, and EBP820 Rated capacity: up to 2,000 kg/h Motor power: 6.2 (8.5) kW (HP) Electrical connection: 400V 50Hz (3-phase) Electrical protection: 16 A Length: 2,000 mm Dodpfsb Ncc Djx Apwewc Width: 700 mm Height: 2,400 mm Intake height: 800 mm Weight: 285 kg Material: 1.4301 / AISI 304 Cleaning connection: 1/2" internal thread Washing tank connection: 2" external thread Pulp discharge height: 1,500 mm Fruit discharge height: 800 mm Scope of delivery: 7mm, 9mm, and 12mm cutting sieves included

Leto izdelave: 2026, stanje: novo, The pasteurization system is fully automated through an industrial control system and a touchscreen interface. If the temperature of the juices to be pasteurized drops below the required level, the outlet side of the machine is shut off and the juice is diverted through the bypass until the target temperature is reached again. Filling can then be continued. At the end of operation, the tube coil can be easily cleaned using a sponge ball. Our system requires minimal maintenance. ⚙️ Technical Information Rated capacity: 400 L/h Power consumption: 27 kW, 400 V, 40 A Material: stainless steel Wnr. 1.4301 / AISI 304 Water buffer: 80 L Dsdpfx Apjv Srl Rjwjwc Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Weight: 170 kg Optional with filling devices

Stanje: novo, Leto izdelave: 2025, Automatic filling and capping system for liquid dispensing. Suitable for various liquids and oils from the food sector (still water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as non-food products (perfumes, cosmetic oils, cleaning agents, etc.). The automatic filling machine is equipped with two filling heads that move both vertically and horizontally, enabling continuous filling and thus achieving a higher cycle rate. The movable filling heads of the filling machine automatically detect the position of the bottles and the diameter of the bottle neck, offering additional benefits such as minimized adjustment work and sensor settings – within a defined range. Changing to other bottle sizes is therefore made much easier, which ultimately results in shorter downtimes due to time savings. Simple adjustment to different bottle widths and heights without the need for additional format parts. After filling, bottles are transported by conveyor belt to the automatic capping machine. Cap positioning and closing are fully automatic. Djdpfsv Nk R Hox Apwswc - Specifications: Filling range: 30-3000 ml; Number of filling heads: 2; Maximum machine cycle rate (idle): 50 cycles/min; Stainless steel version 304, product-contacting parts made of stainless steel 316; Dimensions and weight of the filling system depend on the final layout. Please note that our new equipment prices are often below typical used equipment prices. Feel free to contact us and specify your packaging requirements. - We usually have 30-50 different new machines available immediately from stock. For machines custom-manufactured to client specifications, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Leto izdelave: 2026, stanje: novo, Instantaneous water heater with tube heat exchanger directly in boiler water * Compact design and low weight * Energy savings up to 10%! * Low maintenance * Easy to clean * Excellent price/performance ratio * Available with oil or gas burner Technical data: Dedpfot Eui Isx Apwowc * Boiler output: 40 kW * Hourly output: up to 550 liters (10–78 °C) * Dimensions (H/W/D): approx. 140 x 100 x 115 cm * Empty weight: approx. 190 kg ##### RINK – Pasteurization systems for over 30 years Proven technology – more than 500 machines in use by customers

Stanje: rabljeno, Leto izdelave: 2016, Pregled Ta tračna preša je bila izdelana leta 2016 s strani podjetja SRAML. Dwodpfezpffhex Apwec Stroj je zasnovan za neprekinjeno pridobivanje soka iz zdrobljenih jabolk s pomočjo neprekinjenega tračnega prešnega sistema. Tračna preša SRAML TP50 je dobavljena skupaj z mehaničnim, samočistilnim filtrom SRAML JF1500, ki odstranjuje nečistoče, kot so peške in peclji. Bila je v delovnem stanju, ko so jo umaknili iz redne proizvodnje, in je bila vzdrževana kot rezervna naprava. Stroj so nadomestili s prešo večje zmogljivosti. Tehnični podatki - Zmogljivost: 700 kg/h (jabolka) - Uporaba: Pridobivanje soka iz zdrobljenih jabolk - Konfiguracija: Neprekinjen tračni prešni sistem z mehaničnim, samočistilnim filtracijskim sistemom - Filtracijski sistem: Mehanični, samočistilni filter za odstranjevanje pešk in pecljev Obseg dobave - Tračna preša | SRAML | TP50 | 700 kg/h | 2016 - Samočiščeči filter | SRAML | JF1500 | Odstranjevanje pešk in pecljev | 2016 - Rezervni deli | Trakovi, valji, ležaji, samočistilni filtri s črpalko, menjalnikom, 0,75 kW motorjem in drugimi potrošnimi deli

Stanje: novo, Leto izdelave: 2026, Dosing ranges: 1 ml – 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Bottle feed via bottle unscrambler or stainless steel rotary table Volumetric filling Sub-surface filling possible Adjustable filling nozzles Pumps and filling nozzles made of stainless steel AISI 316 L Dwsdpjwpr Tbefx Apwjc Multi-format stars for various bottle diameters Automatic or manual cap application Stepless torque adjustment for capping Capping system for plastic caps and, optionally, for aluminum caps Bottle transport via modular conveyor chain (3,000 mm, depending on configuration) Display control Optional labelling possible Manufactured in Rhineland-Palatinate, Germany

Leto izdelave: 2026, stanje: novo, MSP 700 Belt Filter Press The entire system can be disassembled down to the base frame in just a few minutes! Fully automatic fruit and vegetable press with a closed working chamber to minimize oxidation. Two high-pressure nozzles are mounted underneath the machine, rotating continuously to ensure optimal performance. Thanks to the minimal distance between the pressing rollers and the juice collection tray, foam formation is no longer an issue. Most parts of the machine can be disassembled without tools, making cleaning easy. Fitted with heavy-duty, vibration-damping machine feet. Requires only minimal maintenance. Technical specifications: Dwjdpfx Aperz I Dkewec - Capacity: 700 kg/hour - Power requirement: 1.5 kW, 400 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 2200x1300x1200 mm - Filling height: 1200 mm - Wastewater connection: 40 mm - Dry matter discharge height: 470/770 mm - Weight: 890 kg - With integrated juice pump, collection tank, and level switch - With touchscreen control - Electronics conforming to IP65 - Extra high juice yield: 75% (depending on freshness and quality of the fruit) - Air requirement: 50 l/hour at 6 bar - High-pressure water requirement: 360 l/h - Frequency converter: Speed adjustment for even more professional processing - High-strength, food-grade polyester pressing belt, fiber thickness: 2 mm, weave density: 6×16 fibers/cm², ½-twill weave (suitable for juicing without large fibers) - Easy to clean - Requires minimal maintenance - Adjustable, with vibration-damping machine feet - Rotating brush roller for belt cleaning A high-pressure washer and air compressor are required for operation.

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10038587, Pasteurising system PA500-RWT-Gas, used Dwedpfx Astpcm Iopwec Subject to prior sale!