Center za obdelavo okenskih kril MEK

Profican Oy KKTK 201521

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Kedpeukhd Asfx Abbowt No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Leto izdelave: 1991, Stanje: dober (rabljeno), številka stroja/vozila: 900 1241, Saw blade Ø: 275 mm Cutting capacity at 90° round: 90 mm Cutting capacity at 90° rectangular: 75 x 75 mm Kwjdpom Twgwjfx Abbet Mitre cutting capacity at 45° rectangular: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 1/1.2 kW Space required: 700 x 600 x 1580 mm Weight: approx. 180 kg

Leto izdelave: 2021, Stanje: novo, številka stroja/vozila: 2021041406, Aluminium incline conveyor with substructure Dimensions: approx. 2000 + 2000 mm Discharge height: 1600 mm (example) Height of horizontal section: 200 mm (example) Conveyor belt: green, 2-ply, highly cross-stable, endless welded with stepped joint * Antistatic due to threads integrated in the running side fabric Drive unit and motor control optional Kedpfx Abeg Ez I Hobjwt Stainless steel hopper for material feed

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 235,36 kW (320,00 KM), konfiguracija osi: 4x4, gorivo: dizel, barva: rdeča, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, Leto izdelave: 2025, Oprema: airbag, centralno zaklepanje, klimatska naprava, pogon na vsa štiri kolesa, spojka prikolice, zapora diferenciala, From our range of new vehicles, we offer you: TLF 4000 All-Wheel Drive on Off-Road MAN TGM 18.320 All-Wheel Chassis Our Water Buffalo on MAN There is hardly any terrain too difficult for it. Calmly and powerfully, it transports its loads safely to their destination. And at the incident scene, it demonstrates its strengths by bringing crew, equipment, and sufficient extinguishing agents to the operation together with a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single, track-matching tires for high off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA holders in the crew compartment Body: • High-quality, frame-constructed body made of rust- and corrosion-free material • Fold-out steps for each side equipment compartment • Individually configured stainless steel equipment mounting to your specifications • Walkable, slip-resistant vehicle roof Vehicle Pump/Extinguishing Agent Tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP&ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • Water tank 5,000 l with integrated foam agent tank 500 l • Additional heater in the pump compartment Firefighting Equipment: • High-pressure rapid intervention reel with 50 m form-stable hose • Foam/water monitor 2,000 l/min mounted on the vehicle roof • Self-protection system with 4 extinguishing nozzles in front of the wheels Kwjdpfx Aboxzu Ehebot Safety and Lighting: • LED lightbar on the vehicle roof/2 LED front flashers • Pneumatic special signal system Martin horn • 100 W PA system with announcement unit • Reversing camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on the body and additional headlights • Pneumatic LED light mast with remote control • Hygiene board available on request We will be happy to provide you with a specific offer and present the vehicle to you in detail at our Berlin location. All information to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 235,36 kW (320,00 KM), vrsta goriva: dizel, konfiguracija osi: 4x4, Leto izdelave: 2025, Oprema: airbag, centralno zaklepanje, dvižna zadnja plošča, klimatska naprava, pogon na vsa štiri kolesa, spojka prikolice, zapora diferenciala, From our new vehicle portfolio, we offer you the following: Equipment Carrier Logistics GW-L 4x4 on off-road MAN TGM 18.320 chassis Kwodpfx Aboxyud Uebjt Our robust powerhouse for heavy loads. Its excellent off-road capability provides reliability even in challenging situations. Whether in storm operations, establishing water supply lines, as a modular rescue or equipment vehicle—also available with winch—or as an auxiliary water tender with water tanks, this vehicle covers a wide range of applications. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) and automated transmission • Single tires in track width for optimum off-road performance Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Cab equipped with auxiliary heating Body: • Premium body made of rust- and corrosion-free materials • Two spacious side equipment compartments • Fold-out steps for each side equipment compartment • Individually customized stainless steel equipment storage as per your specifications Tail lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • 2-button foot control • Dual roll-off protection • LED platform lighting Safety and Lighting: • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic MARTIN-HORN special signaling system • Rear view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED ambient lighting on the body and auxiliary headlights • Pneumatic LED light mast with remote control We would be happy to provide you with a detailed quotation and present the vehicle to you at our Berlin location. All information to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer but is for informational purposes only. Subject to prior sale!

Stanje: rabljeno, prevoženi kilometri: 93.937 km, moč: 105 kW (142,76 KM), prva registracija: 09/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: siv, emisijski razred: Euro 6, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 1.900 mm, Oprema: ABS, filter saj, klimatska naprava, Used vehicle Euro 6 green emissions sticker, Sprinter 314 CDI, new model, medium wheelbase panel van with high roof, automatic climate control, 6-speed transmission, reversing camera, rear parking sensors, cruise control, multifunction steering wheel, 2 seats, cargo area lined (floor and walls), 270° rear doors, electric front windows, electric mirrors, central locking, airbag, ABS, ASR, German vehicle, 2nd owner, original mileage. Kwsdpfsv Ugxdjx Abbst !!! Optional with shelving system in the cargo area for an additional charge !!! - Subject to prior sale and errors excepted - Sale to businesses or for export only - Vehicle no.: 80

Stanje: novo, Leto izdelave: 2025, Number of motors: 2 units Working length: 3000 mm Control system: Yes/CNC Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm For wooden glazing beads, muntins, profile strips, aluminium strips, etc. Pos. 1.1 Item no. 942.5103 1 unit HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (internal) to 135° (external) - Movable right head - Saw blade holder Ø 350 mm - Incl. 1 pc. centre support - Pneumatic clamping of the units - Positioning control Exenso DS3 with 15" touch panel display in a dust-protected monitor housing - 3-axis control: 1 longitudinal and 2 swivel axes - Manual input of cutting data - Processing of data from a cutting list (data set as specified) - Processing of measuring stick data (radio caliper GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licences Pos. 1.2 Item no. 723.0121 2 pcs. DS saw blade wood Bevel/Bevel/Flat tooth - Positive Pos. 1.3 Item no. 942.5236 2 sets DS combined workpiece clamping Combined clamping consisting of: Pneumatic swing clamp for clamping material from above (free access to the work table) Horizontal pneumatic clamp – anti-rotation clamping cylinder with pressure piece Kedpfsvzt D Tex Abbswt Clamps can be selected individually via the saw's control system Clamping sequence can also be set via control system Includes safety pre-clamping pressure Scope for 2 sets: - 2 pcs (left/right) vertical swing clamps - 2 pcs (left/right) horizontal clamps Pos. 1.4 Item no. 942.5997 DS feed unit pneumatic Pos. 1.5 Item no. 945.2007 DS350 packaging (transport frame) ----- Total price for this configuration ex-works – on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of offcuts when working with square-cut glazing beads instead of 2nd set Pos. 1.3 943.5236 DS combined clamping! Pos. 2.1 Item no. 942.5201 ES/DS front workpiece clamping - 2 pcs anti-rotation clamping cylinders - 2 pcs cylinder holder with clamping lever ----- For rebated glazing bead, instead of standard plates without groove: Pos. 2.2 Item no. 942.5241 DS350 grooved table supports to customer sample Mounted table supports are milled according to customer drawing Please send us all profile drawings to be cut (pdf, dxf and physical sample) ----- If, for example, aluminium is also to be cut: Pos. 2.3 Item no. 942.5203 DS feed unit hydropneumatic (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, subject to surcharge upon request: ----- Pos. 2.4 Item no. 942.5237 DS Software "Overlength" (subsequent steps must be confirmed) Sequence control incl. hardware. After entering a cutting dimension > max. cutting length of the machine, the cutting is carried out cyclically (left unit cuts, right unit moves material and cuts to size). ----- Pos. 2.5 Item no. 944.1023 GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension) Incl...

Stanje: novo, Number of sanding units: 8 pcs Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L/W/H): 3065 x 1600 x 1900 mm Machine weight: approx. 1500 kg LÖWER-Leistomat SD Kwodpfx Aevnv Uhjbbot ----- Automatic fine sanding machine for wood sanding (smoothing, defibering, and edge rounding) or intermediate sanding of profiled window bars. Featuring Softdisc technology for visible surfaces and automatic profile and width adjustment. - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - 1 upper Softdisc unit Ø=200 mm, 0.75 kW - 1 upper lamella roller unit L=200 mm, 0.75 kW - 1 lower Softdisc unit Ø=200 mm, 0.75 kW - 1 lower lamella roller unit L=200 mm, 0.75 kW - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units on linear ball bearing sets with hardened shafts - Timed immersion of all lamella roller units directly above the incoming workpiece edges. Immersion allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable lamella roller speed via frequency inverter to adjust sanding intensity (separately for discs, surface rollers, and side rollers) - Disc units as Softdisc with hook-and-loop backing for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belt and spring-loaded pressure rollers, continuously variable speed 4-15 m/min - Parameters adjustable via touch panel: workpiece thickness, workpiece width (left lateral units individually), immersion depth of lateral units, spindle speed, feed rate - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width and profile recognition, as well as automatic positioning of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically indexed powered feed roller, automatic clamping of workpiece, feed after unit adjustment - Red/green signal lights indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with return processing) - Workpiece height: 12-160 mm - Extraction connection: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blow-off directly at the discs - Length (housing) x width x height (mm): 3065 x 1600 x 1900 - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400 V, 50 Hz, 3-phase, air supply: 6 bar - CE-compliant version ----- Price of the above-mentioned machine on request! ----- Special accessories at extra charge: Set of replacement lamella strips for Leistomat SD-200, comprising: Surface units: - 30 strips EH45 / 200 - 7 (rollers) - 30 strips EH45 / 200 - 20 (rollers) Rebate units: - 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid, with 30 slots, 50 mm long Set of replacement lamella strips for SmartFlex lamella disc, comprising: - 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc - D=200 mm, grit 220, with velour backing (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc - D=200 mm, grit 280, with velour backing (hook-and-loop), pack of 100 pcs. ----- ...

Stanje: novo, Staple length, mm Staple width (Rieker width), mm Impact energy, Nm Painting support for simultaneous painting of sash and glazing bead frame RU-LH Painting Aid for Glazing Bead Frames For processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. One staple is placed at each of the 4 corners of the glazing bead frame. Positioning is done diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping action is created. During painting, the glazing bead frame is placed approx. 20 mm in front of the sash. After drying or before sash assembly, the glazing bead frame is pressed flush into the sash and then removed again before glazing. The staples can then be pulled out by hand. Stand frame with support table, vertical at 85°, tiltable. 2 compensation frames for different glazing bead thicknesses, operated via foot pedal. Kjdjxpi Efjpfx Abbswt Price on request plus packaging and shipping Optional at a surcharge: Pack of staples 26 x 50 mm, 4,300 pieces each EUR 77.00 Images of the painting aid can be found at the end of the adjacent video! (Technical specifications according to manufacturer – subject to change without notice!)

Stanje: rabljeno, prevoženi kilometri: 10 km, moč: 103 kW (140,04 KM), prva registracija: 10/2025, vrsta goriva: dizel, lastna masa: 2.330 kg, največja dovoljena obremenitev: 1.170 kg, skupna masa: 3.500 kg, medosna razdalja: 4.490 mm, barva: bela, število sedežev: 3, prostornina tovornega prostora: 15,5 m³, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 1.780 mm, višina nakladalnega prostora: 1.961 mm, gradbena višina: 2.590 mm, delovna širina: 2.040 mm, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, tempomat, Body variant: high roof in vehicle color, Climatic air conditioning (driver’s cab), central locking with remote control and interior operation, electrically adjustable and heated exterior mirrors, front electric windows, multifunction display Plus, assistance system: hill start assist, assistance system: lane keeping assistant (Lane Assist), assistance system: City Emergency Braking, assistance system: surroundings monitoring (Front Assist) with City Emergency Braking, assistance system: traffic sign recognition, assistance system: fatigue detection sensor, cruise control system including speed limiter, multifunction steering wheel, assistance system: parking aid front and rear, spare wheel with standard tires incl. on-board tools and jack, rain sensor, LED headlights, LED daytime running lights, digital radio reception (DAB+), touchscreen, Bluetooth mobile interface, multimedia interface 2 x USB (Type C) front, mobile online services App-Connect, emergency call system, tire pressure monitoring system, heat-insulating glazing, Storage package 2, driver airbag, front driver/passenger airbags – passenger airbag can be deactivated, Anti-lock Braking System (ABS), Electronic Stability Program (ESP), light assistant (Coming Home – Leaving Home), engine start/stop system, particulate filter, sliding door right loading/passenger compartment, electronic immobilizer, headlight leveling control, on-board tools and jack, electromechanical power steering, paint: Candy White, seats in driver’s cab: double passenger seat with storage/compartment and foldable backrest as a table, front bumper in grey with vehicle color panel, Assistance Package Basic, seats in driver’s cab: comfort driver’s seat, towing hitch: fixed ball head, trailer stabilization program, aerodynamic underbody cladding, radiator grille with chrome strip on top, left convex exterior mirror, right convex exterior mirror, integrated LED indicators in exterior mirrors, automatic driving light control, side marker lights, Audio system Composition Colour (radio / SD card interface / USB), cab flooring: rubber, entry handle at rear left D-pillar, entry handle at rear right D-pillar, A-pillar grab handles, lockable glove compartment, two folding remote keys, seat belt warning system (driver/passenger), LED interior lighting in cab, LED cargo/passenger compartment lighting, dual-tone horn, 12V sockets in driver’s cab (2 units), lashing eyes in cargo area, assistance system: brake assist (HBA), adjustable steering column (steering wheel), assistance system: crosswind assist, SCR system (AdBlue technology), body/design: standard high-roof panel van, wheelbase 4490 mm, drive type: front-wheel drive, 6-speed transmission, permissible total weight 3.50 t, truck registration, compartments: 2 DIN slots at front under headliner, driver’s cab interior lighting: front reading lamp, over 150 transporters and buses in stock. Financing or leasing possible through Santander Consumer Bank, Targo Bank or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed features may need to be checked separately. Subject to changes, errors, and prior sale. Delivery available for an additional charge. Export license plates available here on site. Trade-in of your old vehicle possible. Retrofit of: - Trailer hitches up to 3500 kg possible - Auxiliary heaters - Screen for reversing camera and/or navigation via smartphone (Andro Ksdpet Siyhjfx Abbswt