Podajalnik POWER ROLL MX 38

POWER ROLL MX 38

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. Hodpfx Aod E A I Iobhjh The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Stanje: novo, Leto izdelave: 2025, Max Ø 114mm. Straight and bent round tubes. Single grinding station. Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical pipes. The ML planetary belt system enables belt grinding without tube rotation in order to deliver the best possible results. The infeed system safely feeds straight tubes into the grinding station to ensure consistent and productive surface quality. Hedpfx Aet Eaw Dobhsh ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Belt speed (m/s): 3-22 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Total power (kW): 4.5 Power consumption (A): 11 Dust extraction port (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: novo, Leto izdelave: 2025, Front-opening blast cabinet is a significant convenience when working with large and heavy workpieces. Telescopic actuators installed in the door facilitate easy opening. The sandblaster is equipped as standard with a built-in dust extraction system to remove dust generated during blasting. It comes complete with a set of nozzles, a blasting gun, and protective window stickers. Machine Description Dust-free operation is ensured by the use of perimeter seals, allowing for environmentally friendly work. The blasting hose is positioned in the lower part of the collection container. A drainage opening enables quick media changes. The sandblaster is used for cleaning and treating various surface types, e.g., removing rust, paint, and residues from metal surfaces such as automotive parts, engines, fittings, housings, wheels, rims, etc. Suitable abrasive media include: quartz, silicon carbide, glass beads, plastic sand, emery, and other materials. Hjdem Ncb Eopfx Abheh Technical Specifications – KDP350TOP WORKING CAPACITY: 330 L (0.33 m3) OPERATING PRESSURE: 4 - 8 bar AIR CONSUMPTION: 400 - 700 l/min AIR CONNECTION: 1/4" QUICK COUPLING VIEWING AREA: 580x270 mm EXHAUST CONNECTION (VENTILATION): ø 63 mm and 90 mm INTERNAL CABIN DIMENSIONS (Width x Depth x Height lowest/highest point): 890 x 655 x 360/610 mm OVERALL DIMENSIONS: 960x720x1500 mm WEIGHT: 64 kg Standard Equipment - DC15 cyclone extractor - Work area lighting – 12 V fluorescent lamp (230 V power supply, with switch) - 2 high-quality rubber work gloves integrated with the device - 2 extraction/ventilation connectors (ø 64 mm and 90 mm) for connecting an extraction unit - Blasting gun with eight interchangeable ceramic nozzles - 4 pieces of protective film for the window/viewer - Front door with perimeter rubber seals for dust-free operation - Instruction manual in Polish Please note the device requires self-assembly. The price shown is NET and does not include shipping costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Digging depth: 1.65 meters Lifting capacity: up to 150 kg Ground pressure: 0.35 kg/cm² Working pressure hydraulic system: 160-210 bar Dimensions: 255 x 90-110 x 222 cm (LxWxH) Slewing range: 360°, with a slewing speed of 13 rpm Articulated boom Joystick control Adjustable undercarriage Technical specifications: Manufacturer: HZC Power GmbH Model: DKB991 Engine: Koop diesel engine with 9.5 HP / 7 kW Hjdjvz Ih Tspfx Abhsh Cooling: Hydraulic oil cooler Max torque: 25 Nm Max. speed: 3600 rpm Digging force: 5.5 kN, lifting force: up to 150 kg Fuel tank capacity: 5.5 liters Electric starter: 12 volt Max climbing ability: 25° Maximum speed: 2 km/h Ground pressure: 0.35 kgf/cm² Undercarriage dimensions: 1090 x 180 x 320 mm (LxWxH) Hydraulic oil tank capacity: 17 liters (HLP46) Pump type: gear pump Swing radius: 360° Swing speed: 13 rpm Hydraulic pump: gear pump Working pressure: 160 bar Maximum pressure: 210 bar Bucket breakout force: approx. 650 kg Hydraulic flow: 30 liters per minute Digging depth: 1650 mm Dump height: 2150 mm Reach at ground level: 3000 mm Dimensions: 2550 x 900-1100 x 2220 mm (LxWxH) Lifting force: 600 kg Product/shipping weight: 940 kg Features: Articulated digger arm (120°), hydraulically adjustable chassis from 90 cm to 110 cm, additional hydraulic port on the digger arm for hydraulic accessories

Stanje: rabljeno, Stroj za skobljanje in profiliranje Weinig Powermat 500 za štiristransko oblanje in profiliranje lesa s CNC krmiljenjem in hitrim menjavalnim sistemom Powerlock. Vreten: 7 Vreteno 1: Spodaj / 7,5 kW / 8.000 obr/min Vreteno 2: Desno / 7,5 kW / 8.000 obr/min Vreteno 3: Levo / 7,5 kW / 8.000 obr/min Hsdpfx Asxzdwyjbheh Vreteno 4: Desno / 7,5 kW / 8.000 obr/min Vreteno 5: Zgoraj / 7,5 kW / 8.000 obr/min Vreteno 6: Zgoraj / 7,5 kW / 8.000 obr/min Vreteno 7: Spodaj / 7,5 kW / 8.000 obr/min Delovna širina: 260 mm Delovna višina: 160 mm Pomik: 30 m/min / 4 kW Dolžina poravnalne mize: 2.500 mm Miza z zračnim blazinom: Da Krmiljenje: PowerCom Plus

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1977, Strojniška stružnica Znamka: WEILER Model: MDU 260 Leto izdelave: 1977 – delavniško testirana Št. stroja: 14942 Višina konic: 125 mm Premer vretena: 28 mm Oprema: - Električni pokrov vpenjala - 3-čeljustno vpenjalo Ø 140 mm vključno s kompletom stružnih čeljusti vključno s kompletom svedrskih čeljusti - 4-čeljustno vpenjalo Ø 140 mm vključno s kompletom stružnih čeljusti vključno s kompletom svedrskih čeljusti - Varnostni ključ za vpenjalo Hjdpfxexv A I Ts Abhoh - Ročni vpenjalni sistem - Set vpenjalnih tulec W28 (366E) - Set (=25 kosov) napenjalnih tulec W28 (366E), od 1,0 do 25,0 mm v korakih po 1,0 mm - Trdna konica za glavni vretenik W28 (366E) - Hitromenjalni nosilec orodja osnovno telo velika A - Navodila za uporabo Rabljeno kot je vidno, prodano brez garancije Stroj tehnično ustreza standardu iz leta izdelave.

Stanje: rabljeno, Leto izdelave: 2011, Header with rapeseed equipment. Header year of manufacture 2022. Claas Vario 930 header. Hedpfx Aot Twuisbheh

Stanje: novo, Drilling capacity in steel (diameter): 16 mm Throat depth: 180 mm Drilling stroke: 85 mm Spindle mount: MT 2 Spindle diameter: 47 mm Spindle speeds: 320 - 3300 rpm Table transverse travel: 230 mm Table longitudinal travel: 100 mm Table clamping area: 420 x 155 mm Connection voltage: 230 V Max. packaging dimensions: 900 x 600 x 300 cm Hsdpfxjupxcyo Abhsh Total power requirement: 0.75 kW Machine weight: approx. 80 kg Dimensions (L x W x H): 0.7 x 0.7 x 0.8 m Drilling and milling machine with: - Cross slide - Feed via handwheel - Chip guard - 16 mm drill chuck - Mechanical MT tool clamping

Stanje: novo, Technical specifications for pallet racking beam: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet racking beam, new Material color: RAL 2004 orange Box profile: 130 x 50 x 1.5 mm Beam type: PNB0413 S355MC Connector: 4 hooks Clear width: 2,700 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load Hedpslwkwdofx Abheh 02x Safety pins, new Design: fully galvanized For securing the beams against unintentional lifting

Stanje: rabljeno, CNC oxy-fuel cutting system BACH type ACW 2500 Oxy-fuel cutting machine with NBS 400 CNC control Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Track length: 8000 mm Gauge width: 3345 mm Track height: 650 mm Hjdpsf Ncadsfx Abheh 2x machine cutting torches with cutting table