Osrednja stružnica

Poreba TCG 160 LATHE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Rezkar za zobnike ZFWZ 6300x40 Proizvajalec: WMW-MODUL Model: ZFWZ 6300x40/1 Leto izdelave: 1970 Največji premer zobnika: 7100 mm Širina zobnika: 1500 mm Maks. modul: 45 Premer mize: 5300 mm Premer x širina rezkarja: 400x500 mm Maksimalni kot spirale: 45° Premer rezkarja: 500 mm Hitrosti vrtenja rezkarja: 9-63 U/min Skupna potrebna moč: 47 kW Teža stroja: 160 ton Opremljen z navadno glavo za rezkanje, tangentno rezkalno glavo, glavo za notranje rezkanje, menjalnimi zobniki, podporami. Na voljo je video Gkedpjxln Iwefx Adkea

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, X-travel 2,500 mm Y-travel 3,000 mm Z-travel 1,250 mm Control HEIDENHAIN iTNC530 Spindle speeds – stepless up to 22,000 rpm C-axis ±300° Swiveling head ±110° Tool holder HSK 63 A Tool changer with 50 positions Total power requirement 130 kW Machine weight approx. 53.5 t Installation dimensions approx. 7.6 x 7.3 x 5.7 m This ZIMMERMANN FZ33c is immediately available and in good condition. – NEW spindle installed 6 months ago Description: Technical specifications of the system and working areas X-axis 2,500 mm Y-axis 3,000 mm Z-axis 1,250 mm A-axis ±110° C-axis ±300° Including vibration sensor Including bearing temperature sensor Including rotary feedthrough for internal high-pressure coolant (IKZ) 5-axis path control: Heidenhain iTNC 530/manual pulse generator HR520, 15" TFT color display Extraction system LTA Industrial Air Cleaning Machine enclosure roofing Tool changer 50 positions, chain magazine, rear of the machine Chip conveyor, discharge 60° left, front end Probe not included!!! Blum laser tool measurement "Control NT-Micro" Clamping table Length x Width x Height: 2,500 x 3,250 x 400 mm Table load 8,000 kg/m² (max. 16,000 kg) T-slots, longitudinal 18H12 T-slot spacing 250 mm Dimensions and Weights Required space (without peripherals): approx. 7,600 x 7,300 x 5,650 mm Total weight approx. 53,500 kg Electrical specifications Voltage (three-phase): 400 V Frequency: 50 Hz Compressed air connection (on-site) Required pressure: 6 bar Average air consumption: approx. 15 m³/h (depending on machine equipment) Linear axes drives Rapid traverse X, Y, Z axes: 60 m/min Axis acceleration X, Y, Z axes: up to 5 m/s² Rotary axes drives – VH30 Rapid traverse A, C axes: 360 °/s Axis acceleration A, C axes: 700 °/s² Resolution A, C axes: 0.0001 Linear axes accuracy – according to VDI / DGQ 3441 Positioning accuracy X-axis P = 0.026 mm Y-axis P = 0.028 mm Z-axis P = 0.020 mm Repeatability X-axis Ps = 0.015 mm Y-axis Ps = 0.016 mm Z-axis Ps = 0.010 mm Measurement system resolution (interpolated) A, C axes: 0.0001° Rotary axes accuracy – VH30 Positioning accuracy A, C axes P = 12" = 0.0033° Repeatability A, C axes Ps = 8" = 0.0022° Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% duty cycle): 60kW Spindle speed: 22,000 rpm, 95 Nm, HSK-A63 External fork head dimensions L x W approx. 500 x 600 mm Nominal torque rotary axes closed-loop A: min. 1,200 Nm Gkodpfx Adszak Hgjksa C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Grease-lubricated for life with automatic re-lubrication system) Swivel axis – spindle nose: 326 mm Tool holder: HSK 63 A Tool clamping: spring clamp Tool release: hydraulic Admissible tool weight: 4.5 kg (manufacturer specification) Coolant supply external and internal Coolant/lubricant delivery (emulsion) at the face of the milling spindle with band filter system Capacity 1,500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar Blow air at the face of the milling spindle

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 16.350 km, vrsta goriva: dizel, skupna masa: 48.000 kg, stanje pnevmatik: 75 odstotek, konfiguracija osi: 8x4, gorivo: dizel, barva: modra, skupna dolžina: 16.200 mm, skupna širina: 2.540 mm, skupna višina: 3.990 mm, Leto izdelave: 2019, obratovalne ure: 1.215 h, Oprema: ABS, registracija tovornjaka, registracija vozila, === TECHNICAL SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 1,215.6 h Mileage: 16,350.9 km Gkjdpfxjygvite Adkja Crane manufacturer: Palfinger Crane model: P 900 Chassis manufacturer: Volvo Axle configuration: 8x4 Drive type: Diesel Transmission: Automatic Emission class: Euro 6 Gross vehicle weight: 48,000 kg Tyres: Continental Tyre condition: approx. 75% CE certification: Yes === CRANE SPECIFICATIONS === Crane type: Telescopic truck-mounted crane Maximum working height: approx. 90 m Maximum outreach: approx. 32.5 m Maximum lifting capacity: According to Palfinger load charts Outriggers: Hydraulic outriggers Radio remote control: Yes === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certified including complete documentation Ready for immediate use and transport Comprehensive technical documentation available === CONDITION === Machine in good technical condition Fully inspected and tested Viewing by appointment possible === LOCATION & PRICE === Location: Sittard, Netherlands Worldwide shipping available Price on request, EXW, plus VAT === DESCRIPTION === Heavy-duty truck-mounted crane Palfinger P 900 mounted on Volvo 8x4 chassis Ideal for professional lifting operations requiring great working height and outreach Part of a professionally maintained fleet Fully CE-certified and immediately ready for use Spare parts and technical support available upon request === DELIVERY === Crane loading on request possible Flexible transport solutions depending on destination and logistical requirements All transports handled professionally by Collé Rental & Sales logistics team

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, stružna dolžina: 8.000 mm, premer struženja nad ležiščem sani: 2.000 mm, teža obdelovanca (maks.): 25.000 kg, premer struženja nad zgornjim sanežem: 1.550 mm, Premer struženja nad ležiščem Ø 2000 mm Premer struženja nad sani 1550 mm Dolžina struženja 8000 mm Premer izvrtine vretena 150 mm Moč vretena 95 kW Širina ležišča 1400 mm Pinola Ø 260 mm Hod pinole 200 mm Vpenjalo vretena Metric 80 Mk Teža obdelovanca 25000 kg Moč 95 A Hitrost vrtenja 360 obr/min Pomik X-os 0 - 6000 mm/min. Pomik Z-os 0 - 6000 mm/min. Prosimo, upoštevajte: Podatki na tej strani so bili po naših najboljših močeh in po potrebi dobljeni tudi od proizvajalca. Podatki so posredovani v dobri veri, natančnosti pa ni mogoče jamčiti. Zato ne predstavljajo zastopanja ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podatke. Gkjdpfx Aoxxxbzodkoa

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, izvrtina vretena: 160 mm, Premer struženja nad ležiščem Ø: 1040 mm Premer struženja nad saneh: 710 mm Premer struženja v jamici Ø: 1580 mm Dolžina struženja: 3000/4500 mm Dolžina jamice: 1500 mm Premer vretena: 160 mm Moč vretena: 40 kW Širina ležišča: 800 mm Vpenjalni stožec vretena: 6 Mk Teža obdelovanca: 3500 kg Hitrost vrtenja: 800 o/min Gkodsxtbf Espfx Adkoa Pomik X-os: 10000 mm/min Pomik Z-os: 10000 mm/min

Leto izdelave: 2019, obratovalne ure: 4.525 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12, STROJ ZA LUŠČENJE IN RAVNANJE PALIC V KOMPLETU Oprema je v brezhibnem delovnem stanju in jo je mogoče preizkusiti pod napajanjem. Popolnoma prenovljena leta 2019 (popolnoma nova mehanika in elektronika). Delovno območje: Ø 20 – Ø 80 mm Dolžina palic: 2,5 – 6,0 m Obdelovalna toleranca: ISO h9 (možna tudi h8) Globina luščenja: do 3,5 mm, odvisno od vrste jekla Vrste jekla: ogljikovo jeklo, ležajno jeklo, vzmetno jeklo ipd. Hitrost podajanja: digitalno nastavljiva 0,5 – 12 m/min Število vrtljajev glave za luščenje: do 1700 min⁻¹ Rezila: dva kompleta po 4 nože z avtomatskim digitalnim pozicioniranjem (trikotni in dolgi noži) Avtomatska nalagalna miza s števcem palic Podajni valj z motoriziranim nastavljanjem višine Vhodni tlačni valji – 4 vertikalni valji z invertnim DC motorjem Stroj za luščenje sestoji iz: - Sprednji vodilni sistem - Glava za luščenje s 4 noži Gkedpfjwqb Scjx Adkja - Zadnji vodilni sistem Voziček za izvlek palic Glavni motor in prenos Izhodni stiskalni valji – dvojni Odlagača miza z motoriziranim nastavljanjem višine Zbiralnik s števcem in avtomatskim prevzemom končanih palic Hidravlična enota – povsem nova Električna omarica – nova, z dvema moduloma.

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm — "MULTIFIX" quick-change tool post in front of the centre, size "C" — 4-position turret behind the centre Gsdpfx Adjgyy I Ajkska — Tool holder — Coolant system — Follow rest, pneumatically operated Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Stanje: rabljeno, številka stroja/vozila: 7979, Table diameter: 400 mm Gkodpfx Adsb Ez R Ujkja Table with 8 T-slots: 12 mm Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Prodajamo ta stružnica. Priloženi so lunete in dodatna rezkalna naprava. Dolžina struženja: 8000 mm Premer nad ležiščem: Ø 2020 mm Premer nad prečnim pomikom: Ø 1600 mm Vrtina vretena: 120 mm Gkjdpfex Auwgjx Adkoa Obrati / območja: 180 obr/min Moč vretena: 80 kW Premer konjička: Ø 400 mm Hod vretena: 250 mm Mere: Dolžina: 15360 mm Širina: 3520 mm Višina: 2600 mm Teža: 78000 kg Stroj se nahaja v kompleksu nekdanjih livarn Vítkovice v Ostravi, Češka. Stroj je priključen in ga je možno preizkusiti. Lahko pošljemo video stroja preko WhatsApp-a.

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table. Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and ball screw for X-axis. Technical Data: X-travel (longitudinal): 10,000 mm Y-travel (cross): 1,500 mm Z-travel (vertical): 3,000 mm Gksdpowrzkzjfx Adksa Spindle taper: SK50 Spindle speed (2-speed): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main motor power 100% duty cycle: 37 kW Machine weight approx.: 39,300 kg Technical data, accessories and machine description are not binding.