Celotna žaga (stacionarna)

Pilous CTR1300H

Stanje: rabljeno, dzinēji – 55 un 55 kW padeves motors – 7,5 kW augstuma regulēšanas motors – 1,1 kW griešanas augstums – 200 mm griešanas platums – 350 mm zāģripas diametrs max. – 300 mm vārpstas diametrs – 2 x 60 mm uzmavas diametrs – 2 x 70 mm sliežu platums – 350 mm kopējā jauda – 119 kW elektriskā padeves regulēšana automātiskā centrālā eļļošana elementa minimālais garums – 600 mm elektriskā augstuma regulēšana vārpstas augstuma regulēšana seši augšējie spiediena rullīši pneimatiskie stiprinājumi pieci pretatsitiena mietiņi lineāls uzgaļa diametrs – 220 mm vārpstas apgriezienu skaits – 4500 apgr./min iekārtas izmēri (garums/platums/augstums) – 275 / 235 / 210 cm svars – ~7000 kg Padevējs: max. griešanas garums – 1850 mm min. griešanas garums – 800 mm max. materiāla garums – 2500 mm min. materiāla garums – 600 mm max. materiāla platums – 700 mm max. materiāla augstums – 200 mm rullīšu platums – 700 mm rullīšu diametrs – 130 mm Ffedpfx Afowrw D Reljt rullīšu skaits – 26 3 gludi spiediena rullīši 4 zobaini uzvelkošie rullīši padeve regulējama ar invertoru 0–70 m/min zāģa vadotņu centrālā eļļošana zāģa motoru jauda – 2 x 9,2 kW padeves motora jauda – 1,5 kW disksāna motoru jauda – 3 kW ķēdes motora jauda – 1,1 kW izmēri (garums/platums/augstums) – 7050 / 2100 / 1850 mm

Stanje: dober (rabljeno), Well-maintained horizontal frame saw. Passage width: 1000 mm. Stroke: 800 mm. Fedpfx Aounhl Usflsft Feed rate electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamps. Can still be inspected in operation.

Stanje: kot nova (razstavni stroj), Blokovska tračna žaga Hauslhof CTR800Hydraulik, demonstracijski stroj, Premer hloda do 830 mm, Skupna dolžina 5800 mm, širina 2300 mm, s hidravličnim sistemom za napenjanje, vpenjanje, obračanje in dvigovanje hloda Skupna izhodna moč motorja pri 100% ED: 10 kW Opcije: CTR800H-Ver3 CTR800H-KSD CTR800H-STH CTR800H-STH-V CTR-SSP CTR-11 Ffedpfx Asvrvrnsflot CTR-VOR CTR-AMP CTR-EGL CTR-LG Automat CTR-Pumpe-EA

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 620 h, Little-used and well-maintained Komatsu PC 20 R-5 Mini Excavator Technical specifications: * Operating weight incl. equipment approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length 3,845 mm * Overall height 2,370 mm * Overall width (minimum) 1,280 mm (990 mm) * Track width 230 mm * Tail swing radius 1,120 mm * Total track length 1,570 mm * Max. digging reach 4,100 mm Fsdpjrwvvysfx Aflsft * Max. digging depth 2,370 mm * Minimum swing radius 1,515 mm Features included: * 2 travel speeds with auto-shift-down * Servo control * Long dipper stick * Auxiliary hydraulic circuit (2-way) to boom (switchable to breaker mode) * Protective cover on boom lift cylinder * Work light on the boom * Dozer blade * Acoustic travel alarm * Tool kit * CE conformity * Cab with heating * 1x standard hydraulic line (with pedal) * Suspension seat with 2-point seat belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other information: * Attachments NOT included – sale on request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Üstünkarli UDKP 160 Fedpeucnudofx Aflsft Cutting height: 160 mm Chain bed approx. 420 mm With spikes in the chain bed Including slat bushing and intermediate rings Main motor: 75 kW

Stanje: novo, Leto izdelave: 2023, Order comb, tine shape 15 mm Order combs, tine shape 20 mm Ffsdpfx Afoiacbpjljt Finger joint profile Glue application comb Adhesive application comb Glue comb Glue combs >>Delivery time: ex stock

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.240 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 135 l, barva: bela, Izhodni tok: 130 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 34 kW (46,23 KM), neprekinjena moč: 30 kW (40,79 KM), skupna dolžina: 2.200 mm, skupna širina: 950 mm, skupna višina: 1.230 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Deutz, Cummins, Ricardo, vrsta hlajenja: voda, vrsta vhodnega toka: trifazni, Three-phase stationary generator set Proton ZPP 30R (30kW - 34kW) in a compact, weather-resistant, and additionally soundproofed enclosure. The generator is equipped with an external Automatic Transfer Switch (ATS / Autostart) system and many other features listed later in the description. • Model – Proton ZPP 30R ATS • Maximum power – 34,000 Watt (34kW / 40 kVA) • Rated power – 30,000 Watt (30kW / 36 kVA) • Ready to operate – Yes • Type – Industrial generator set • Generator condition – Brand new • Manufacturer – Proton • Generator type – Three-phase • VAT invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo MN4100ZDS Fuel type – Diesel Fuel consumption: - 6.5 liters per hour (at 75% maximum load) - 5.0 liters per hour (at 50% maximum load) Engine configuration – Inline (R4) Displacement – 4100 cc Direct injection Lubrication system – Forced, engine with oil pump ⊳ ALTERNATOR: 100% copper winding AVR voltage stabilizer – Yes Alternator model – Proton 184H Rated output 400V – 30,000 Watt (30kW / 36 kVA) Maximum output 400V (up to 15 minutes) – 34,000 Watt (34kW / 40 kVA) Rated current (400V) – 140.0 A Current protection – C16, C32, main – 100A Frequency – 50 Hz Alternator construction – Synchronous ⊳ ENCLOSURE: Soundproofed housing Weather-resistant housing Three-phase and single-phase sockets Fuel tank capacity – 135 liters Average runtime on full tank – 20 hours Transport set – Forklift slots and HDS transport hooks Dimensions: 220 x 95 x 123 cm Gross weight – 1240 kg ⊳ FEATURES: AVR voltage stabilizer – Stamford SX460 (2%) - electronic voltage stabilization under variable load - electronic frequency stabilization Automatic generator set operation (ATS – Automatic Transfer Switch) Overload and thermal protection Oil pressure sensor, oil level sensor, coolant level sensor Glow plugs Oil pan heater Coolant heater Battery – 2 x 40Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Engine hour meter Ammeter Voltmeter Built-in PLC logic and editor Ffodpotpvdtsfx Aflet Overload protection CAN module extensions Integration with SCADA systems Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and GPRS monitoring – Optional Modbus, Ethernet communication – Optional Why us? We are a company specializing exclusively in generator sets, with over 17 years of experience in the industry, constantly striving to ensure our products represent the highest quality and reliability. Throughout this time, we have delivered solutions to over 10,000 customers across Poland, including its most remote regions. We meticulously select the suppliers of our generator components, making sure they are leaders in their respective fields. We offer a wide range of generators from 6 to 300kW with various engines, including English Ricardo, American Cummins, and German Deutz, as well as custom configurations tailored to individual customer requirements.

Leto izdelave: 2007, Stanje: rabljeno,

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used Fedpfxjwtgcxj Afljft

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, dolžina rezanja (maks.): 12.000 mm, največja širina rezanja: 1.000 mm, Small horizontal sawmill WRAVOR WRC 1000, the smallest in the range, fixed version: Solid flywheels with 1000mm diameter for a cutting diameter of 1M; cutting length adaptable according to possible frame extensions: currently 8M (12M frame). Hydraulic (dogs/rollers, aligners, log turners) and mechanical equipment: • 4 hydraulic loading arms mounted to the frame • 3 pairs of hydraulic dogs / space for 3 additional pairs as optional • Hydraulic log lifting with clamps, featuring 2 mechanical rollers and 1 driven roller, with adjustable height capability • Hydraulic aligners (up/down movement): 4 units • Mechanical supports: 3 units • Hydraulic lifting rollers: 3 units • 90° angle aligners, up/down movement: 3 units • Standard hydraulic log turners: 2 units • Hydraulic generator: 40L tank and 16L for the 4kW pump • Overhead electric cable mounted on rail and rollers • Mechanical outfeed table (2.5M, can be hydraulic, tilting, 4M, optionally connected to operator’s station) Operator station currently separated from the sawmill, basic control system, Wravor program, joysticks, and sawdust extraction system available as options. Hydraulic blade tension adjustment / Electric scorer / Hydraulic pushing arm for sawn timber / Right/Left blade guides: centralized blade lubrication / Head movement (worm screw)... Fsdpjvr Ez Ejfx Aflsft PV 45 blade, length 6390mm, width 110mm