Stroj za predelavo testenin

PAVAN P 320

Stanje: rabljeno, Yamato 714 Večglava Tehtnica Popolnoma iz nerjavečega jekla | Ojačana površina | Opcijska nadgradnja RCU810A | Pripravljena za globoko zamrzovanje Iščete visokozmogljivo rešitev tehtanja za zamrznjene ali trde izdelke? Model Yamato 714 je popolnoma iz nerjavečega jekla, rigidizirana večglava tehtnica, zasnovana za najzahtevnejša proizvodna okolja. Njene ravne dozirne žlebi omogočajo optimalno delovanje s proizvodi iz globoke zamrzovalnice ali trdimi izdelki, saj preprečujejo lepljenje ali blokiranje. Po želji so na voljo tudi modeli z nagnjenimi žlebovi, posebej primernimi za lahke izdelke, kot so zelenjava. Stroj je popolnoma obnovljen, temeljito pregledan in takoj pripravljen za uporabo. ----- Tehnične specifikacije – Yamato 714 Tehtalne glave – 14 glav Tehtalno območje ~20 g do 3.000 g (enkratni izpust); možnost večkratnega izpusta Hitrost – Do 90 tehtanj na minuto (odvisno od izdelka) Vrsta žleba – Ravni žlebovi (idealno za zamrznjene/trde izdelke); na voljo tudi nagnjeni žlebovi Krmilnik – Opcijska nadgradnja na RCU810A (barvni zaslon na dotik) Material ohišja – Popolnoma iz nerjavečega jekla, rigidizirana/dimpled površina Stanje – V celoti servisirana in obnovljena – pripravljena za zagon Uporaba – Zamrznjeni izdelki, meso, morski sadeži, trde sladkarije, korenasta zelenjava in več Velikost izdelka – Primerna za srednje do večje izdelke (odvisno od nastavitve) Poudarki - Trpežna rigidizirana površina zmanjšuje lepljenje izdelkov - Opcijski krmilnik RCU810A za intuitivno upravljanje - Idealna za zahtevna okolja (hladnice, zamrznjene pakirne linije) - Na voljo alternativni modeli z nagnjenimi žlebovi za mehke/sveže izdelke Iodpfjxdfa Isx Amujig - Na zalogi – hitra dobava možna! ----- 📦 Takoj na voljo 📍 Pregledana in pripravljena v naši poslovalnici 📞 Kontaktirajte nas za ponudbo, ogled ali dodatne informacije!

Stanje: rabljeno, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Iisdjwzzgnspfx Amusg Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Leto izdelave: 2026, stanje: novo, Blago je načeloma projektno blago oziroma glede na razpoložljivost na voljo kot razstavni stroj. Iodpoq T R Sbefx Amuoig Uporaba: Doziranje prosto tekočih izdelkov v natančne količine. Lastnosti tehtnice - Enostavno upravljanje - Hitro in enostavno čiščenje - Nizki stroški vzdrževanja - Orodju neprijazna (de)montaža vseh formatnih delov v stiku z izdelkom - Nizki stroški vzdrževanja - Izvedba iz nerjavečega jekla (1.4301) - Krmilnik popolnoma integriran v ohišje stroja - Nastavljiv vibracijski sistem za optimalen potek proizvodnje - Visoka natančnost zaradi kombinacije Tehnični podatki - Število tehtalnih glav: 10 - Prostornina tehtalnega lijaka: 2,5 l - Tehtalno območje: 10 – 1000 g / 2.500 g - Natančnost: ±0,2–1,5 g - Hitrost: 60 vrečk/min (odvisno od izdelka) - Upravljalna plošča: 7" zaslon na dotik - Moč: 1 kW / 230 V / 50 Hz - Dimenzije (D x Š x V): 1620 mm x 1100 mm x 1110 mm - Teža stroja: 380 kg

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Ijdpfjwa Rhrjx Amujig Proizvajalec: SIDEL Tip: SBO 4 S1 Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Vgrajena moč: 150 kW V kompletu kalupi za 1,5 L Podajalnik preform Tehnično stanje: rabljena naprava, zažene se, program deluje

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" Ijdpfxjw U N Ixs Amujig • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 1998, Automatic PET Bottle Blow Molding Machine Iiedpfsutni Rex Amuog Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Included in the set: - 1.5 L bottle molds - Preform feeder - Chiller unit Technical condition: The machine is used and was fully operational until disassembly. Currently, the machine is dismantled, packed in components, and prepared for transport. Comes with comprehensive and original technical documentation.

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Iiodpfxskucxle Amusg Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L23001388, skupna masa: 208 kg, kapaciteta rezervoarja: 14 l, vrsta hlajenja: voda, vhodna napetost: 380 V, Semi-industrial machine designed for kneading dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to the production of short-cut pasta, long pasta, and pasta sheets from dough. Suitable for medium-scale pasta production as well as for supplying dough sheets to cutting machines or nest formers. Iedpfx Amew Av Snjusig All parts in contact with the dough and the entire frame are made of stainless steel. The mixing paddles and auger are easily removable for cleaning. The machine is equipped with an automatic cutter complete with a set of blades. Additionally, I have a brand new penne pasta production kit for sale (2,200 euros).

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), A Solarco corrugated cardboard cutting and creasing machine is available. Sheet width: 1700 mm, max. sheet dimensions X/Y: 1700 mm/4000 mm, min. sheet dimensions X/Y: 300 mm/600 mm, single production output: 200-600 pcs/h, max. multiple production output: 2000 pcs/h, carton thickness range: 2 mm - 8 mm, machine dimensions X/Y/Z: approx. 5500 mm/4000 mm/1900 mm, weight: approx. 4500 kg. Documentation available. On-site inspection possible. Iedpfjwgc Ahsx Amuoig

Stanje: novo, CENA: 5000 EUR Mobilno dvigalo za voziček za rezila Izdelano iz nerjavečega jekla Nosilnost: 200 kg Isdpevtzzkofx Amusig Dimenzije: 1160x800x2900 mm Električna moč: 0,75 kW Napetost: 220V 50Hz