Stiskalnica

Packstation Bergmann PS 1400

Leto izdelave: 1982, Stanje: dober (rabljeno), številka stroja/vozila: 14320, baling press / paper baler Iaodpfxjiuky Ie Af Tsl

Leto izdelave: 2021, Stanje: kot nova (razstavni stroj), Overband plate magnet Construction in stainless steel 1.4301, fully welded and sealed including drawer for cleaning 800 x 500 x 180 mm completely welded housing lifting eyes for suspension Iaedped Evl Dofx Af Tel

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. Ijdpfx Asvwlqqof Toal The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm Iodpeu Nw Ezofx Af Teal

Stanje: novo, Leto izdelave: 2024, Hacker knives 40 x 40 concave Blades for Weima, Gross, etc. For almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale Iaedpfxsbxu Dhj Af Tjl

Leto izdelave: 2006, Stanje: dober (rabljeno), številka stroja/vozila: 1452, Bedienfeld mit Anzeige Iasdpfx Afsk Izqtj Tsl

Stanje: novo, - Motor power: 9 kW - Control system: PLC-assisted, two-hand safety control - Cutting force: 35 tons - Splitter table: straight version - Cutting channel: - Maximum blade length: L = 2000 mm - Maximum opening height: H = 1200 mm - Machine weight: approx. 4 tons - Hand protection grille in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift truck) In stock – immediately available Price and further information on request Iedped Hf Tdjfx Af Tjal

Stanje: novo, Leto izdelave: 2024, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency inverter (FU) – this controls the speed of the sliding floor. The bales are placed on the sliding floor and the feed of the milling unit is started. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the bale breaker is combined here with a straw shredder. Technical Data Bale Breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on sieve size used in the straw mill, kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max size square bale: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Sliding floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €3,940 net Technical Data MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Sieve with interchangeable inserts available in (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, overload protection, and 8 m power cable, ready to plug in Blow-out spout 160 mm Blow distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at additional cost: Feeding auger + €970 net Cyclone (suspension to be provided by customer) *should be no more than 10 m away + €2,970 net Simple filter €1,750 net --- Other options: Industrial extraction system (ex-demo) + from €9,950 net Optional rotary valve *renders material pressureless + €5,750 net Control system: from €1,620 net Special breaker extension 3 m (*other dimensions must be calculated) + €9,750 net Briquette press MPP 180 S; little-used demo unit 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines upon request --- Description: muetek bale breaker has been developed for dissolving round and square bales of hay and straw. The shredder attached to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale can be placed using a front loader. The support surface is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, with adjustable feed speed. The milling rotor is equipped with several teeth that tear up the straw bale. The straw separated from the bale is ejected. --- Basically, the machines are suitable for dry input materials: - Straw - Hay --- Disintegration of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on version) Shredding of hemp is not possible with the straw mill. Iedpfx Ajb Nulhjf Tjal Requirements for the input material: Maximum moisture content 12%

Stanje: novo, Leto izdelave: 2025, Moč motorja 7,5 kW Iajdpfogl Adzex Af Tjl - Rezilna sila 30 ton Rezilni kanal zasnovan za - največjo dolžino koluta 1500 mm - največji premer koluta 850 mm - Teža stroja pribl. 3500 kg - Prostornina rezervoarja pribl. 110 litrov - Zaščitna rešetka na območju upravljalne plošče in nasproti - Zaklep rezila - Razdelilna miza ravna izvedba - Dokumentacija v 2 izvodih v nemščini (1x v tiskani obliki, 1x CD) - Barva RAL 5012 svetlo modra Zaščitna rešetka/rezilni nosilec RAL 1028 melonsko rumena Stroj na zalogi in takoj dobavljiv Cena in dodatne informacije na zahtevo

Stanje: dober (rabljeno), Leto izdelave: 1987, Manufacturer Model: PS 8100 Height: 2,200 mm Width: 1,200 mm Length: 1,625 mm Loading height: 1,900 mm Weight: 800 kilograms Rated current at 400 V: 4.8 A Transformer rated current at 230 V: 0.38 A Motor power: 2.2 kW Fuse: 10 A, slow-blow Rotation: 13 rpm Protection class: IP 54 Isdpfsk E Hh Sjx Af Teal Fire class: D, E Hydraulic oil: HLP 32 Bale weight (depending on material): 150–400 kg Bale volume: 1 m³