Balirka 80 t s transportno tehnologijo

Paal GmbH Konti 275 E

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), skupna masa: 2.600 kg, Leto izdelave: 2006, Cutting width: 600 mm Cutting length: 1200 mm Center distance between knife shafts: 250 mm Knife shaft speed: approx. 16 rpm Knife shaft torque: approx. 17,000 Nm Feed hopper: 1,200 mm x 2,400 mm Hnjdpfxetzbvyj Af Tjg Drive power: 2 x 11 kW Total drive power: 22 kW Weight: 2,600 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection Hnsdevwlqqspfx Af Tjg - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Hodpou Nw Ezofx Af Teng Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm

Leto izdelave: 2006, obratovalne ure: 15.000 h, Stanje: dober (rabljeno), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250–350 kg/h The plant is currently processing HDPE, but it is also suitable for other plastics such as LDPE... Hedpfjumubysx Af Tjng The machine can be inspected during operation. A new extruder screw was installed in February.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rotacijske škarje, dvoosni drobilnik, Pogonska moč 110 kW (2 x 55 kW), Nazivni tok: 210 amperov Širina rezila: 75 mm Velikost rezalne enote: dolžina 1600 mm x širina 980 mm Sistem za hitro menjavo rezil, SEW menjalnik, Vključno z hidravlično potisno napravo, nazivna hidravlična moč: 7,5 kW, Krmilna omara, Rezalna enota obnovljena, Dimenzije: dolžina ca 6150 mm x širina ca. 3100 mm x višina ca. 3150 mm, Skupna teža: ca. 17 t Hjdpjwva Hiefx Af Tong

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t Hedpfeic Rl Dex Af Tsng The hydraulic unit is functional, the drive motor is removed.

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 340000674, The HSM baler V-Press 403 is a compact solution for the efficient compaction of waste and recyclable materials. This used press delivers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust construction and user-friendly operation, it is perfectly suited for use in a variety of industries. Technical Details: Machine no.: 6113.114 Serial number: 340000674 Hnjdjunzn Njpfx Af Tjg Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Power: 1.1 kW Rated current: 2.6 A Year of manufacture: 2011 Weight: approx. 300 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen,

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD baler Hnedpfx Afera A E Uo Tsg Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Leto izdelave: 2003, obratovalne ure: 43.000 h, Stanje: potreben popravila (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Hardox bodemvloerplaat uitsluitend Kunststof ventiel Anti-ratten bekabeling Hnjdokcgynepfx Af Tog Draaiuren: 43.000 Deze pers kan tevens volledig gereviseerd worden verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Hierbij geldt een garantie van 2 jaar. Neem contact met ons op voor meer informatie of een vrijblijvende offerte. Algemene principes van revisie Reiniging & demontage Voordat de revisie daadwerkelijk plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten nagemeten en waar nodig opnieuw gelast. Dit geldt in elk geval voor de volgende onderdelen: • Aanpersplaat (ram) • Frame • Kanaal • Voorpersklep Na demontage en inspectie wordt de ram opgelegd en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden waar nodig uitgedeukt en gerepareerd. Overspuiten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen & slangen worden vervangen. De hydraulische componenten worden voorzien van nieuwe pakkingen. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en waar nodig vervangen. Alle aansluitdozen worden vervangen en gemonteerd op goed toegankelijke locaties. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vernieuwd. Cilinders: De cilinders worden opnieuw verpakt en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast: De schakelkast wordt gecontroleerd en gereinigd. Waar nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieninterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.