Celovit sistem za uničevanje dokumentov s tekočim trakom in stiskalnico

HSM GmbH + Co KG Shredder Duo 5750

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ekstruderji in vijakove stiskalnice za predelavo soje, pridobivanje olja in sojine pogače. Na voljo sta dva ekstruderja in dve stiskalnici. En ekstruder in ena stiskalnica delujeta v tandemu ter tvorita linijo za stiskanje. Moč motorja stiskalnice je 22 kW, ekstruderja pa 55 kW. Kapaciteta ene linije je 500–800 kg/h. Cena se nanaša na eno linijo (ekstruder+stiskalnica). Dsdpjtxinaefx Afljul

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.580 mm, skupna širina: 2.320 mm, skupna višina: 2.600 mm, vhodna napetost: 400 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nujno zaustavitev, Uporaba in koristi za stranke ASCO DS 600 je idealen dvogredni drobilnik za reciklažna podjetja, občine, gradbeno logistiko in industrijsko upravljanje odpadkov. Zanesljivo drobi les, zeleni odpad, plastiko, folije, palete in embalažo z kompaktno učinkovitostjo, nizkim vzdrževanjem in prilagodljivo stacionarno ali mobilno uporabo. Ključne značilnosti: Dodpfx Afow Afvpsloul • Robustni protismerno vrteči se gredi za močno drobljenje • Vsestransko obdelovanje materialov v različnih industrijah • Prostorsko varčna kompaktna zasnova • Enostavno upravljanje z avtomatskim povratnim hodom • Hitro in uporabniku prijazno vzdrževanje Tehnične lastnosti: Širina 2,32 m · Dolžina 1,58 m · Višina 2,60 m · Premer nožev 200–350 mm · Hitrost 10–60 obr/min · Moč 8–60 kW · Teža 1870–2590 kg · Dovod 0,95 × 1,18 m · Izpust 0,60 × 0,60 m

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti Tlak: 2,2 kg/cm² 18 kW kotel za termično olje Časovno nastavljivo stiskanje Digitalni prikazovalnik Moč in motorji Napetost: 400 V Priklop: trifazni Moč: 20 kW Mere Dolžina: 3500 mm Širina: 1500 mm Duedpfx Afst N Autsljl Teža: 3200 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Dedpovwlqqofx Afljul Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2023, Stanje: novo, Fine grinding mill for flour, coffee, dried spices, and more. Grinding range from 20 to 120 mesh. Throughput: 100–400 kg per hour. Motor speed: 3,400 rpm. Machine weight: 600 kg. Required power: 11 kW. The machine is equipped with an additional dust extraction filtration unit. Constructed entirely from SUS304 stainless steel. Djdpfxok S Rpuj Afleul

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Dedpfxoh Nyfyo Afleul Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, moč: 320 kW (435,08 KM), Stationary shredding plant LINDNER Jupiter 3200. Dodpfxewg Ev De Aflsul Electric drive: 2x 160 kW Including hydraulic unit, control cabinet. Drive belts new.

Stanje: dober (rabljeno), Marmorna plošča Dolžina: 3500 mm Širina: 1500 mm Debelina: 300 mm Višina na nogah: 930 mm Duodpfx Afjig Hu Njlol Število nog: 5 1 manjša poškodba na vrhu (D 150 mm x Š 20 mm) – glejte fotografijo Teža: pribl. 3 t

Stanje: novo, - Motor power: 9 kW - Control system: PLC-assisted, two-hand safety control - Cutting force: 35 tons - Splitter table: straight version - Cutting channel: - Maximum blade length: L = 2000 mm - Maximum opening height: H = 1200 mm - Machine weight: approx. 4 tons - Hand protection grille in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift truck) In stock – immediately available Duodpfxsd Hf Tdj Aflel Price and further information on request

Stanje: dober (rabljeno), UV curing oven for coating line Djdpfx Afst Ag Uqelsul