Stroj za etiketiranje

P.E. Labellers Futura S 16T.-D.740-1S-1E

Stanje: rabljeno, Leto izdelave: 1992, Overview This blow molding machine was built in 1992 by the French manufacturer Sidel. It is capable of producing up to 4,000 bottles per hour. Technical details Capacity: 4,000 bph 4 cavities Scope of delivery Blow molding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two mold types for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Lodenpbhvepfx Abbehb

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, NP 684 | LINEA COMPLETA DI IMBOTTIGLIAMENTO PET KRONES 30.000 BPH Prodotto: Acqua naturale (con modifica al collo può imbottigliare anche acqua frizzante) Velocità: - 30.000 BPH con bottiglie da 0,5 lt - 30.000 BPH con bottiglie da 1,5 lt - 22.000 BPH con bottiglie da 2 lt Ore di lavoro: 56.000 Ribaltatore preforme M. Tanner AG: - Modello: VZT -4010 - Anno: 2004 Sistema di lavaggio preforme Krones: - Anno: 2004 Compressore ad alta pressione Ateliers Francois: - Modello: 20G282 - Anno: 2004 - Pressione: 40 BAR Soffiatrice PET Krones: - Modello: Contiform 20 - Anno: 2004 - Numero cavità: 20 - Stampi esclusi - Completa di alimentatore e orientatore preforme Elevatore e orientatore tappi Gassner: - Anno: 2004 - Tipo tappi supportati: Plastica prefilettata - Tipo: meccanico Elevatore e orientatore tappi Gassner: - Anno: 2004 - Tipo tappi supportati: Tappo sport - Tipo: meccanico CIP Steinecker: - Modello: Media - Anno: 2004 Stazione UV WEDEDCO: - Anno: 2004 - Trattamento acqua tramite raggi UV Monoblocco KRONES (composto da riempitrice e tappatore): - Modello: Isofill - Anno: 2004 - Direzione: Antioraria - Regolazione in altezza: elettrica Riempitrice: - 88 valvole - Tipo di riempimento: isobarico - Tipo valvola: meccanica - Degasaggio Tappatore: - 22 teste - Tipo tappi lavorabili: plastica prefilettata, tappo sport - Sistema di distribuzione pick & place Ispezionatrice bottiglie Heuft: - Modello: HBBVXTXXX - Anno: 2015 - Direzione bottiglia: da destra a sinistra - Tipo di controllo: sovrariempimento, sotto-riempimento, presenza tappo, tappo non allineato Nastri trasportatori bottiglie Krones: - Anno: 2004 Etichettatrice Krones: - Modello: Contiroll - Anno: 2019 - Direzione: oraria - Regolazione testa elettrica - 18 teste con camme meccaniche - 1 stazione alimentata a bobina – etichetta avvolgente - Controllo presenza etichetta Fardellatrice Variopac: - Anno: 2004 - Versione: Film Launch - Tipo: solo film Imballatrice Wrap Around Krones: - Modello: Wrapapac Lhedpfx Aboxl R Uajbob - Anno: 2004 - Sistema colla a caldo: Nordson - Bottiglie per scatola: 12x1,5L e 24 x 0,5L - Ore di utilizzo: 1000 Nastri trasporto fardelli/scatole Krones: - Anno: 2004 Handler Comag: - Modello: H 55/2 - Anno: 2004 - Doppia corsia Pallettizzatore Krones: - Modello: Pressant - Anno: 2004 - Tipologia prodotto da pallettizzare: fardelli, scatole - Tipo: a spinta - Magazzino pallet - Sistema interfalde - Doppio ingresso Fasciapallet Robopac: - Modello: HELIX HS 30 - Anno: 2004 - Tipo di fasciatura: braccio rotante - Prestiro

Stanje: rabljeno, Leto izdelave: 1999, Overview This SIDEL stretch blow molding machine and the KHS filler monobloc were both manufactured in 1999. They will remain in production until the end of October and can be inspected in operation. A key feature of the filler is that it includes a micro-dosing unit capable of processing carbonated or still mineral water with natural flavors. The filler (KHS Innofill monobloc) and the accumulation table (Sidel AQ) are available separately without the blow molder (Sidel SBO 18 Series 2); price upon request. Technical Details Stretch Blow Molding Machine | SIDEL | SBO 18 Series 2 | 1999 - Current capacity: 23,400 bph with 1.25L bottles - Operating hours: 40,000 - Number of molds: 18 - Mold type: Clamshell quick-change - Formats produced: 1.25L bottles, cylindrical petaloid base - Oven type: Sidel - Neck finish customization: PCO 1881 - Preform type: with recycled PET resin - Regularly maintained - Machine equipped with: - Sidel preform tipper - Sidel hopper with lid and feeder - Sidel preform unscrambler - Feed rail for Sidel preforms - Blowing station for 18 mold cavities - Sidel control cabinet with Siemens Sidel PCC drive & control - Lanfranchi bottle buffer silo - De-clumping and air conveyor system with drive unit at infeed KHS Monobloc Delivered with all format sets & spare parts available - Rinser, isobaric filler, and capper Lodpfx Aorqar Sebbehb - Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low operating hours) - Filling of carbonated mineral water and carbonated mineral water with natural flavors - Processing: PET bottles 1.25L & 0.50L, cylindrical petaloid base - Bottle neck: PCO28 1881 - Current capacity: 23,400 bph - Number of rinser nozzles (KHS Innoclean): 40 - Number of filling valves (KHS Innofill): 50 - Number of capping heads (Zalkin): 16 - Includes Perrier micro-dosing unit for natural flavors - With cap magazine & elevator Accumulation Table - Gebo Sidel Type AQ file - Dynamic accumulation and buffering between the filler outfeed and the labeler infeed, prevents undesired stoppages upstream (filler, blow molder) due to the labeler.

Stanje: rabljeno, Leto izdelave: 2019, Overview The fill level inspection system was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Ledpfx Abjl Hxnisbohb Technical details: - Capacity: 50,000 bph - Inspection via gamma ray - Krones Checkmat with discharge table and pusher

Stanje: dober (rabljeno), Proizvodna kapaciteta do 4000 steklenic/uro (odvisno od formata). Primerno za formate med 0,25 l in 3 l. Sestavljeno iz: • Peč za segrevanje preoblik (preform), sestavljena iz 6 grelnih modulov z vsakim po 8 infrardečih svetilk • Kolo za prenos preoblik • Dvostopenjski sistem pihanja s stisnjenim zrakom: nizkotlačno pred-pihanje in nato visokotlačno pihanje • Kolo za prenos steklenic • Dostavljeno z obračalcem palet DOKUMENTACIJA NA VOLJO Ledpfx Aswcggvebbehb

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Proizvajalec: SIDEL Tip: SBO 4 S1 Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Vgrajena moč: 150 kW V kompletu kalupi za 1,5 L Podajalnik preform Lhsdpswa Rhrofx Abbeb Tehnično stanje: rabljena naprava, zažene se, program deluje

Stanje: rabljeno, Leto izdelave: 2004, Overview The filler was manufactured in 2004 and was used in recent years at a brewery in France. The entire brewery was sold to a company in Belgium. The filler is no longer needed and is therefore being offered for sale. It is suitable for filling beer and soft drinks. The machine has been dismantled and is properly stored. Technical Data: - Output: 2,500 bottles/hour (0.75 l per bottle) - 3,300 bottles/hour (0.33 l per bottle) - 20 rinsing stations - 20 filling valves Lhodpfxel Hxl Ie Abbob - 3 capping elements - Bottle formats: 0.33 l; 0.75 l - Working direction: left to right

Stanje: rabljeno, Leto izdelave: 2006, Overview The filling and capping block was built in 2006 by the German manufacturer Filltec. Technical details Number of filling stations: 32 Number of capper stations: 8 Magnetic cap elevator for crown caps Mains voltage: 400 V Frequency: 50 Hz Auxiliary voltage: 24 Volt DC Electrical protection class: IP 54 Lodpfx Abem U R Dajbehb

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Used Sacmi 3 L Bag in Box Line: Carton Erector: Sacmi Packaging EC 25 – 2012 Ultra-Clean Filler: Sacmi Pakim FB-2 – 2007 Carton Closer: Sacmi Pakim C.R.C.E. bib – 2007 Handle Applicator: Sacmi Pakim – 2007 Speed on 3 L format: 1,200 pcs/hour Included format: 3 liters Safety guards Carton erector melting unit – MELER Micron 4/2 120P – 2012 Carton closer melting unit – MELER Micron 4/2 100P – 2007 Carton belts included Reference: OP 10 This 2012 Used Sacmi 3 L Bag in Box line is designed for carton packaging production and the filling of 3-liter containers. The line includes a Sacmi Packaging EC 25 carton erector, an Ultra-Clean Sacmi Pakim FB-2 filler, and a Sacmi Pakim C.R.C.E. bib carton closer. Additionally, a Sacmi Pakim handle applicator is provided. Lsdpev Dadlofx Abbjhb This equipment achieves a production speed of 1,200 pieces per hour for the 3-liter format. Safety devices are included to ensure a secure working environment. The system includes a MELER Micron 4/2 120P melting unit for the carton erector and a MELER Micron 4/2 100P melting unit for the carton closer. Carton belts are supplied as part of the set.

Stanje: rabljeno, Leto izdelave: 2002, Overview The labeling machine was built in 2002 by the Italian manufacturer Cavagnino e Gatti. The machine applies self-adhesive labels to glass bottles. The labels are supplied from the roll, providing flexibility in label dimensions. Technical specifications: Capacity: 7,000 bottles/hour. Suitable for glass bottles. Recently used formats: 0.375 l to 1.0 l glass bottles, 200 ml PET bottles. Equipment: 3 self-adhesive labeling stations. Electrical power: 3.5 kW. Compressed air: 25 l/min at 5 bar. Lhedpjpb U Iujfx Abbjb