Ogrevalni bazen za oblaganje robov

Ott U 206

Leto izdelave: 1994, Stanje: dober (rabljeno), Finishing unit, buffing unit, modular unit system, profiling unit, double-end tenoner, edge processing machine, cleaning unit - Manufacturer: Paul OTT, finishing unit from edge banding machine U 206 - Type: KEO-04 - Motor: 0.3 kW - Speed: 1450 rpm - Lateral adjustment: yes - Height adjustment: yes - Quantity: 2 units available - Price: per piece - Dimensions: 400/280/H660 mm / 480/290/H660 mm Todpfsu N Sggsx Abgsf - Weight: 35 kg / 36 kg

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm Tedpfx Aexfh Tmsbgof - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Leto izdelave: 1994, Stanje: rabljeno, Double-end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor - Manufacturer: Paul OTT, milling units from edge banding machine U 206 - Milling motors: Type HF 08.2 - Power: 0.6 kW / 200 Hz - Speed: 1,200 rpm - Adjustment ranges: see photos - Quantity: 2 milling units available - Price: per unit - Dimensions: 530/490/H600 mm Tjdpfx Abeu Rv Rxegsf - Weight: 67 kg/unit

Leto izdelave: 1994, Stanje: rabljeno, Double-end tenoner, edge processing machine, flush trimming cutter, edge trimmer, spindle motor, milling motor - Manufacturer: Paul OTT, milling unit from edge banding machine U 206 - Milling motors: Stephan Type ZBXD90L20-2 Gearbox BMB 46 - Power: 2.2 kW Tedpfx Absu Scpqjgjf - Speed: 12,155 rpm - Cutter width: 30 mm - Adjustment range: 0 - 70 mm - Dimensions: 460/370/H570 mm - Weight: 89 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, Edge banding machine with jointing milling unit; otherwise fully equipped. PU glue can be used. Tedpegmn H Aofx Abgof

Leto izdelave: 1994, Stanje: rabljeno, Double-end profiler, edge processing machine, flush milling cutter, edge router, spindle motor, milling motor, saw unit, milling aggregate, saw unit - Manufacturer: Paul OTT, saw unit from edge banding machine U 206 Tjdpfx Absu Rv Ttjgof - Motors: Type K 14 - Power: 0.8 kW / 200 Hz - Speed: 1,200 rpm - Saw blade: Ø 140 mm - Saw blade spacing: 515 to 1,070 mm - Dimensions: 530/490/H600 mm - Weight: 78 kg

Stanje: rabljeno, Leto izdelave: 2010, Touchscreen control for adjusting work groups Panel thickness from 10 to 50 mm Solid wood 12 mm PVC/ABS edging from 0.4 to 3 mm Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Electronically adjustable working height by CNC Motorized rubber-coated belt with superior pressure Panel support guide Side roller conveyor with idle rollers for panel support Tsdspzfcgopfx Abgef Anti-adhesive unit Rectifier unit with two 1.5 kW motors each Roller holder plate COMBIMELT adhesive application unit for hot melt glue with automatic VarioMelt dosing and pre-melter Patented edge pressure unit with segmented pads Pre-milling unit with 2 motors Trimming unit with 2 motors Corner rounding unit Edge scraper unit Installed power 13.7 kW Machine length approx. 6170 mm TECHNICAL DETAILS MUST BE VERIFIED

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.100 mm, višina reza z zareznim rezilom (max.): 70 mm, premer žaginega lista: 305 mm, hitrost pomika os X: 40 m/min, hitrost podajanja os Z: 50 m/min, skupna dolžina: 3.100 mm, skupna širina: 3.100 mm, skupna masa: 3.000 kg, moč: 7 kW (9,52 KM), zahteva za prostor dolžina: 3.100 mm, potrebna širina: 3.100 mm, Oprema: dozator, vrtilna hitrost brezstopenjsko nastavljiva, Panel Dividing Saw SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a powerful, electronically controlled panel dividing saw designed for precise, efficient, and automated cutting of wood-based panels. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months Todpfxowrn Efe Abgof CE-compliant and dust-tested (limit value < 2 mg/m³) Main Technical Data & Equipment: - Longitudinal cutting saw FM 20-3100 with hardened guides - Automatic forward and return movement of the saw unit (automatic lowering on return) - Feed drive via three-phase gear motor with frequency inverter control - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Scoring saw adjustable from the outside (without opening the hood) - Safety hood locking with louver curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 recesses in the pressure beam for residual cuts down to 5 mm - Main saw motor: 7.0 kW | Scoring saw motor: 1.1 kW (can be switched off) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angular pressure device WP 5003 with pressure claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack and pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - 6 clamp fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed phenolic (Pertinax) surface in the angular fence area Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard drive, parallel & serial ports - Network capable (LAN/WLAN), remote servicing via Internet (TeamViewer, Remote Desktop) - USB print function - Multilingual dialog programming - 15" flat screen, multifunction keyboard at swiveling control panel - Graphical display of cutting plans and workflows Software / Programs: - OPTIMAX: Office optimization, offcut calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette, or online (optional) - Manual, automatic & special operating modes (e.g., grooving, veneered parts) Additional Equipment: - Angular fence table HP 5085: 1,720 x 800 mm | Phenolic top - Workpiece support table HP 5025: 1,720 x 800 mm | Phenolic top - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is in use worldwide — even under extreme conditions. Whether in Africa’s dry climate or the high humidity of Southeast Asia (e.g., Thailand), the PA 4136 delivers reliable operation in 3-shift systems — 365 days a year — and impresses with exceptional stability and durability. Guarantee: We are so convinced of the quality and durability of our machines that we offer a 7-year warranty on the machine structure and guideways. (Excludes electrical supplier parts and wear parts.) 📞 Contact us for an individual quotation or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Stanje: rabljeno, Kompaktni robni lepilni stroj Hebrock EURO 3001 za natančno robljenje plošč z robnimi trakovi. Stroj omogoča čisto obdelavo robov z avtomatskim nanosom lepila, pritisnimi valji in naknadnimi obdelovalnimi enotami. Idealno za pohištveno in notranjo opremo. Tehnični podatki so informativni. Agregat 1: Nanašanje lepila Agregat 2: Obrezovanje Agregat 3: Poravnava z rezkanjem Tjdpfx Absxdc D Rogof Višina obdelovanca: pribl. 10 – 40 mm Debelina roba: maks. pribl. 12 mm Podajalna hitrost: pribl. 10 m/min

Stanje: rabljeno, številka stroja/vozila: 006527, Tip nameščenega roba: masivni les Lepilni sistem: PUR Tsdspig A Ispfx Abgsf Spojno rezkanje: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 25 m/min Največja debelina plošče: 62 mm