Širok trak brusilnika širok trak

OTT EU 110 WS

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Max. workpiece height: 280 mm, tool holder: HSK 63F, weight: 6.5 t, inspection possible. Ijdpfxsn Tpm Ho Af Tjht

Stanje: zelo dobro (rabljeno), Calibration and fine sanding machine with 1 sanding unit, 1 motor, top-side processing Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed rates: 5.5 & 11 m/min 1st Unit: Combination unit, rubber-coated sanding drum, 90 Sh / pneumatic sanding pad Ijdpfx Aeudxchsf Tsht Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Dimensions (approx. L x W x H): 1385 x 1980 x 1900 mm Weight: approx. 1,800 kg Automatic workpiece thickness adjustment with digital display Sanding belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 outfeed rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago OVER 30 WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical data subject to change and prior sale. • Prices quoted are ex location – free loading. • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our premises. • Special agreements only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The machine base is a monolithic design made from thick-walled steel. It is reinforced throughout the entire machine bed with welded triangular plates, which ensures exceptional rigidity. The use of a large-base triangular form in load-bearing components is key to ensuring lasting precision and stability. The machine layout allows an optimal workflow for the operator while requiring minimal space. This robust base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile gantry unit carrier is built from a solid monoblock. It moves in the X direction on prismatic, ground guides with recirculating ball carriages. Mounted on the mobile unit carrier, the processing unit also travels on prismatic, ground guides and recirculating ball carriages. Axis Movement: The drive system in the Y and Z axes utilizes precision-ground recirculating ball screws of the highest accuracy grade. The drive in the X-axis is by a backlash-free, preloaded precision rack and pinion system. This enables balanced load distribution during positioning. Such characteristics are essential for smooth operation, even in complex machining scenarios. Axis movement is powered by brushless AC servo motors, which provide excellent positioning speeds thanks to very short ramp times. The feedback systems are fully integrated into these motors, making the drive system entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection): 0.9 bar Ihodpsvvi Nzefx Af Tet Control System / Control Cabinet · Office PC or industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote controller with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control with a unique level of familiarity: the software operates on Windows XP and allows fast and easy programming, which is also easy for inexperienced users to learn. The system is open, supporting connections for CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Installation of all network systems and any commonly available CAD programs is also possible. To save space, the control cabinet is located beneath the machine table, and the operator works from a separate, mobile control terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software Features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Supported programming - Calculator for direct data transfer - Graphics and syntax help for drilling and milling operations - Parametric programming to perform identical panel processing on different p...

Stanje: novo, Leto izdelave: 2022, Carriage length: 3200 mm Cutting width at rip fence: 1270 mm Cutting width at cross-cut fence: 3200 mm Cutting depth: 136.5 mm Scorer: Yes Saw blade tilt range: +45° Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Scorer adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 rpm Motor power: 7 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2200 mm Iedpfeh Uch Ijx Af Tsht Weight: 715 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Wide Belt Sander OTT ALPHA 110 - Machine in stock - After technical inspection - Very good condition - Made in Germany - Year of manufacture: 1996 - Segmented shoe – ideal solution for lacquer / veneer work TECHNICAL SPECIFICATIONS: - Working width: 1100 mm - Working height: 1–150 mm Ijdpegi Dryefx Af Tsht - Combi unit with membrane shoe, task-controlled - Main unit motor power: 11 kW - Belt air jet cleaning - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Unit with felt drum - Drum motor power: 0.75 kW - Drum oscillation - Cleaning brush unit - Brush motor power: 0.75 kW - Feed speed steplessly adjustable - Feed speed range: 4–18 m/min - Feed motor power: 1.5 kW - Electric height adjustment - Vacuum table - Fan motor power: 3 kW - Extraction port diameters: 4 x 120 mm, 1 x 150 mm Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2,500 kg 1. The Alpha Combi unit is a sanding module with a 150 mm diameter contact roller (hardness 90 Shore) integrated with a sectional pneumatic shoe with section width 27 mm. 2. EMS 27 optical system – detects minimal surface irregularities and adjusts the pressure of individual shoe sections at specific locations on the workpiece. 3. Control of adjacent shoe sections is possible within a range of -2 to +4.

Stanje: rabljeno, Leto izdelave: 2002, Obdelovalne mere (premer orodja 25 mm): X=3015 mm Y=1483 mm Z=325 mm Maks. hodilci: X=3268 mm Y=1483 mm Z=325 mm največja programska hitrost: X/Y = 75 m/min / Z = 30 m/min Orodni nosilec HSK 63F Vrtalna enota 7964, 14 vertikalnih vrtalnih vreten s 32 mm razdaljo (10 v x / 4 v y) Žagalna enota 7946, 3,6 kW, pnevmatsko vrtljivo za 90° Glodalna enota 7933, 9 kW Lesena C-os (vektorska os) Magazin za orodja (krožnik s 6 mesti) Ročna upravljalna naprava Laserska naprava (pozicioniranje sesalcev) PC upravljalna konzola z 17" monitorjem Operacijski sistem Windows 2000 Programska oprema: TwinCAM32 - office verzija Vakuumska črpalka 100 m³/h suhi tek Selektivne varnostne stopalne preproge (3-polno delitev) Lokacija zaloge: Nattheim Iodpfx Afevvi Nbo Toht

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Ijdpsvvi Rfsfx Af Tjht Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: električni, model krmilnika: System 6000, delovna širina: 3.200 mm, tip kronanja: CNC krmiljen, najv. debelina pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, zadnji prislon: 3.000 mm, Oprema: CE označba, nujno zaustavitev, Rabljeni CNC upogibni stroj Ras Flexibend 73.30 naprodaj s 3-metrskim zadnjim prislonom Motoriziran vrtljivi upogibni stroj Ijdpfx Ajw T Sc Aof Teht Proizvajalec: RAS Model: Flexibend 73.30 Leto izdelave: 2003 Tehnične specifikacije Proizvajalec: RAS Model: 73.30 Leto: 2003 Uporabna dolžina upogibanja: 3200 mm Debelina pločevine: 3,0 mm Odpiranje zgornjega nosilca: 300 mm CNC nastavljiv hod upogibnega nosilca, max.: 80 mm CNC nastavljiv hod spodnjega nosilca, max.: 80 mm Hitrosti: Upogibni nosilec, max.: 90 stopinj/sek. Zgornji nosilec, max.: 40 mm/sek. Zadnji prislon 10–1550 mm: 2 sek. Oprema • Krmiljenje: Touch & More System 6000 – NOV ZASLON na dotik • CNC krmiljen zadnji prislon, 3-metrski J izvedba / J oblika prislona • Motorizirana nastavitev spodnjega in upogibnega nosilca • Podporna miza Dobra izbira orodja, segmentirana in v polni dolžini

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Iodpfx Aevwbp Asf Teht

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.100 mm, Item no. 2679, year of manufacture 1991. Technical data: Max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec, feed speeds: 4 + 8 m/min, sanding unit motor power: 11 kW, thickness adjustment: 0.55 kW, feed belt: 1.3/1.8 kW, operating pressure: 6 bar, air consumption: 10 l/min, extraction connection: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg. Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic engage/disengage - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by sanding unit - Automatic feed belt centering - Feed belt with high-quality rubber perforated belt and automatic centering - Pneumatic sanding belt tensioning with length compensation - Non-contact electronic sanding belt oscillation - Low-wear disc brake system for immediate stop of sanding belt drive with pressure monitor - Motorized thickness adjustment with digital readout - Workpiece thickness limitation at infeed - Semi-automatic workpiece thickness setting - 4-way grit-thickness compensation for contact roller Special accessories: Workpiece thickness measuring device. Ihsdotppz Iepfx Af Tot