ORT RP30MS PLC - ms

ORT RP30 MS3 PLC Siemens revis-overhaul 2026

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: Codpfst Hw N Tox Afderd PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: pripravljen za uporabo (rabljen), Printing units: 2+1 flexographic printing units, maximum output with dextrin: 900 envelopes/min, paper weight: 70g/m²–120g/m². Formats: Book format min./max.: 83x120mm / 185x330mm, diagonal format min./max.: 83x120mm / 185x265mm. An on-site inspection is possible. Codpfxotq Ha Te Afdord

Stanje: pripravljen za uporabo (rabljen), Format: 0.5–1 l, max. output: 5,000 cartons/h, with cap applicator and EURO-LINE cartoning machine. An on-site inspection is possible. Crodpfxjrviq Hs Afdod

Stanje: dober (rabljeno), Mixer, cutter, and emulsifier combined in a single housing. Codpfom Drylsx Afdjrd Benefits include: - Space-saving design thanks to compact construction, - Product size reduction in the bowl under vacuum with simultaneous mixing and cooking, - Consistently stable end product thanks to fully automatic process control, - Capability for both direct and indirect heating and cooling, - Ability to produce fine emulsions and paste-like masses, as well as products with both fine and coarse fractions. Capacity: 900 l Electrical voltage: 400V 50Hz 3N Installed power: 2x106 kW + 132 kW Main material: stainless steel Agitator tank: 2000 l

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW Crjdpfouz If Nsx Afdjd - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] Csdpfx Afouhb Uhjdsrd - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Stanje: zelo dobro (rabljeno), Brugt Lactoscan S (Standard automat), 90 sek., ultrasonisk mælkeanalysator med 6 parametre. Brugervenlig model. Understøtter printer. Crjdslu Ha Ispfx Afdjd Selvkalibrerende. Mål: 223 x 100 x 216 mm. Målte parametre: Fedt, SNF (ikke-fedt tørstof), densitet, protein, laktose, tilsat vand, temperatur, salte m.m.

Stanje: rabljeno, Leto izdelave: 2009, Technical Details: Turning diameter: 1000 mm Swing diameter: 1000 mm 1. Technical Data Machine type: Vertical Turning Lathe (VTL) Manufacturer: Hessapp Model: DV 62 Serial No.: 14.2308 Spindle Working Range Maximum diameter: 1000 mm Maximum swing diameter: 1000 mm Cross Slide Travels Vertical slide stroke: 900 mm Horizontal slide stroke: 1810 mm Total travel: 2315 mm Spindle Spindle nose with centering cone per DIN 55021 A15 Spindle diameter at front bearing: 203 mm Main Drive Via controlled asynchronous motor and gear drive Codjt Rmdzjpfx Afdord with range selector. Spindle Speeds Speed range I: 5 - 350 rpm Speed range II: 30 - 1000 rpm Traverse Speed X/Z-Axis: 10 m/min W1-Axis: 8 rpm No C-axis

Leto izdelave: 2007, stanje: dober (rabljeno), Danobat CNC Vrtalno / Rezilno linijo – Letnik 2007 Enojno rotirajoče vreteno. 18 metrov vhodnih transportnih valjev. 12 metrov izhodnih transportnih valjev. Prijemalna enota za podajanje. Prečna transferja za vhod. Prečna transferja za izhod. Cjdpfx Ajig T Amefderd Kapaciteta 750 mm. Kapaciteta rezanja: Kapaciteta krožnega rezanja (brez navpičnih čeljusti, kot 0 stopinj): 520 mm. Kapaciteta pravokotnega rezanja (brez navpične čeljusti, kot 0 stopinj): 700 mm x 500 mm. Največja kapaciteta z navpičnimi čeljustmi: 700 x 500 mm. Kapaciteta krožnega rezanja pri 45-stopinjskem zasuku: 450 mm. Kapaciteta pravokotnega rezanja pri 45-stopinjskem zasuku: 450 x 500 mm.

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Overhauled with Siemens PLC Csdpsuua H Refx Afdord See video The machine is powered and available in our warehouse Test run possible