ORT RP30MS PLC - ms

ORT RP30 MS3 PLC Siemens (overhaul)

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm See video The machine is located in our warehouse in Gussago (BS), powered on Gjdpfxst Apugj Agyebi Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration with Müdata and Mütrans, without creel, exceptionally clean, from Germany, 2nd hand Gedpfx Ager I Am Heyjbi NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 88.04.169 D ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 90.00.066 B ex.Alge, Müdata, 16 frames, very clean – €7,000

Stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 750 mm, pomik osi Y: 750 mm, pomik po osi Z: 725 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 4-axis machining centre, year of manufacture 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, double pallet changer, pallet size: 500 x 630 mm, 60-position tool changer, tool holder HSK63, internal coolant supply, gravity belt filter Knoll PF 210/1750, coolant temperature control Hyfra TKR 30, scraper conveyor Knoll 450 K-1, infrared measuring probe Godpfx Agorx Sh Aeysbi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, featuring a longitudinally moving drilling unit. This machine has been fully cleaned and inspected. The drilling machine is equipped with a numerically controlled, longitudinally moving drilling unit (X-axis), range 0 - 15,000 mm, and an automatic tool changer with HSK A80 holder for 6 tool positions. With its 19 kW drilling spindle drive, this machine is suitable for use with carbide drilling tools. Technical details: Profile and flat steel support with guide rail and fixed table Total length: 15 m Mobile drilling unit for longitudinal positioning on workpieces Horizontal drilling head with one drilling spindle Additional tool storage in X-axis direction Clamping device for securing material Position detection device Max. profile size: 1200 x 1200 mm Number of drilling spindles: 1 pc. Gbodev Iamzspfx Agyji Drilling diameter: 5 - 40 mm Thread cutting: M6 - M30 Drilling spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For more information, please contact us.

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U 2-valjna Gbsdpfxot H Ty Uo Agysi 30 ton Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Moč (tona): 30 Število valjev: 2

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Performance: 225 t/24h, mold carriers: 42, mixing positions for additive blending: 10, mixing head type: MQ, max. working pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid fill foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Gedpfx Aottbd Negyjbi

Stanje: pripravljen za uporabo (rabljen), Printing units: 2+1 flexographic printing units, maximum output with dextrin: 900 envelopes/min, paper weight: 70g/m²–120g/m². Formats: Book format min./max.: 83x120mm / 185x330mm, diagonal format min./max.: 83x120mm / 185x265mm. An on-site inspection is possible. Gbjdpjtq Ha Tsfx Agyji

Stanje: dober (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 750 mm, pomik osi Y: 750 mm, pomik po osi Z: 725 mm, CNC control Sinumerik 840D NC rotary table B-axis Magazine for 320 tools Pallet changer device, 2 pallets 500mm x 500mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Spindle drive capacity 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Gbsdjq Ui Hqjpfx Agyei Technical data, accessories and machine description are not binding.

Stanje: rabljeno, Dvojni mostni žerjav 40T DEMAG Proizvajalec DEMAG Tip Dvojni mostni (mostni) žerjav Gbsdpfx Agjxfh Ikjyji Industrijske uporabe Težka dvigovanja v proizvodnji, metalurgiji, mehaničnih delavnicah, logističnih skladiščih in pristaniških terminalih. Glavne tehnične specifikacije - Nosilnost: 40 ton - Razpon (širina mostu): 28 metrov - Konstrukcija: dvojni most - Dvigalni sistem: DEMAG - Namestitev: na tirnice ali na konstrukcijske nosilce - Upravljanje: radijsko daljinsko vodenje ali upravljalska kabina - Uporaba: notranja ali zunanja glede na postavitev v industrijskem obratu 🧩 Namembnost stroja Dvojni mostni žerjav DEMAG 40T je zasnovan za premikanje težkih bremen po širokih delovnih površinah. Razpon 28 metrov zagotavlja popolno pokritost delovnega območja, zaradi česar je idealen za visoko proizvodnjo in logistične potrebe. ⚙️ Lastnosti / Prednosti Model združuje nosilnost 40 ton s 28-metrskim razponom in tako nudi visoko operativno prilagodljivost. Dvigalni sistem DEMAG omogoča natančno manipulacijo, maksimalno stabilnost tovora ter dokazano vzdržljivost v zahtevnih industrijskih okoljih.

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Gbodpfet Hw N Tsx Agyji Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.