Steber vrtalni stroj

OPTIMUM Opti drill B28 H vario

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Bcodpfx Ajgulr Hsg Tsw Spindle reach: 254 mm Table size: 475 mm x 425 mm Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: skoraj kot novo (rabljeno), Stolpni vrtalni stroj Gillardon tip GB 30 V, hitrost vrtenja 60 -1800 obr/min, avtomatski pomik, zelo dobro ohranjen, vpenjalni stožec MK 3. Bedpexpxbcsfx Ag Tecw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 550 mm, največja hitrost vretena: 2.066 obr/min, skupna masa: 4.000 kg, 3-axis Heidenhain digital readout feed drive controller automatic lubrication external electrical cabinet Bsdswqcv Nepfx Ag Tecw table size: 2000 x 460 mm travels: 1500 x 700 x 550 mm weight: 4000 kg

Stanje: dober (rabljeno), Leto izdelave: 1988, Weiler Lathe Type: Condor B 2-axis digital readout Centre height: 165 mm Bcsdpfxevgmbve Ag Tow Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Spindle speed: 22-2800 rpm Tailstock taper: MT 3 Coolant pump (not connected) Work lamp automatic longitudinal and cross feed spindle brake - foldable chuck guard - splash guard Weight approx. 1040 kg 3-jaw chuck Multifix B tool post Live centre

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 4 SV Machine No. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle mount: MK 4 - short quill Throat depth: 340 mm Quill travel: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, stepless Motor power: 2.3 and 3.4 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed selectable via 2 motor speeds and stepless adjustment through variator gearbox - Intermediate gearing with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting system Required space (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg Good condition Bcjdpfx Aon N Ekceg Tow

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 5.000 h, največja hitrost vretena: 2.500 obr/min, skupna masa: 1.800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional lead-screw and feed shaft arrangement, stepless speed control, and a digital readout. Key specifications include a swing diameter of 400 mm, a center height of 195 mm, and a bed length of 1270 mm. The machine is also equipped with a MultiFix quick-change tool post, a maximum spindle speed of 2,500 rpm, and a motor power of 7.5 kW. The total weight is 1,800 kg. Contact us for more information about this machine. • Control: Conventional with lead screw and stepless speed adjustment • Displays: Digital readout for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Swing diameter: 400 mm • Center height: 195 mm • Bed length: 1270 mm • Tool post: MultiFix quick-change tool post Additional equipment: Bcodpfx Agox D Nwdj Tow • 3x three-jaw chucks • 3 sets of jaw inserts • Collet chuck key • Manual/operator’s handbook • Work area lamp • Digital dial gauge • 4 MultiFix tool holders • Various turning tools • Keyless drill chuck for tailstock • Coolant pump

Stanje: dober (rabljeno), Leto izdelave: 1986, Offer 23389 Technical Specifications: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MT 3 - 4 feed rates: 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds (gear stages): 95 - 2000 rpm - Drill spindle stroke: 160 mm - Throat: 350 mm - Table with 3 T-slots, height adjustable: 340 x 320 mm Bcjdpfjrckv Hox Ag Tew - Table tiltable left and right - Max. distance table – drill spindle: 500 mm - Max. distance machined base plate – drill spindle: 1050 mm - Column diameter: 160 mm - Coolant system - Worklight - Drive: 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx.: 350 kg

Leto izdelave: 2026, Stanje: novo, BEFARD XP602 Vacuum Suction Cup for Glass Installation • Maximum load capacity: 600 kg • 8 suction cups • Dual-speed vacuum system • Vacuum release pilot • Battery-powered • Manual 360-degree rotation • Locks at each 90-degree increment • Fully adjustable for vertical and horizontal alignment Additional options: • HS spacer • Spare battery • Transport trolley Bcodpfsiauz Njx Ag Tew • Mesh box pallet Other models available: Grippers with load capacities of 300 kg, 450 kg, 800 kg, 900 kg, 1000 kg Available in your desired color

Leto izdelave: 2022, Stanje: novo, angle: 0° - 90° Bjdpsi Ezr Nofx Ag Tocw maximum cutting length: 1,370 mm

Stanje: novo, Precise, smooth-running standard drill press offering high accuracy and quality. The drill table is adjustable via rack and pinion and can be swivelled around the column. Features full motor protection and star handle. Power supply: 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Bsdpeda Nqxsfx Ag Tjcw Weight: 80 kg Three-phase motor with frequency converter: 1.1 kW Features: - Reversing switch for clockwise/counterclockwise rotation, suitable for thread cutting - Full motor protection - Star handle In stock, available immediately.