Optimum Opti Drill B28 H Vario nakup rabljenega (62.008)

Stanje: rabljeno, Vrtalna zmogljivost v jeklo (premer) 28 mm Izlet 200 mm Vrtalni hod 105 mm Vpenjalni stožec vretena MK 3 Število vrtljajev vretena 12 Hitrost vretena: 35–5600 obr/min Premer stebra 92 mm Velikost mize 340 x 360 mm Miza vrtljiva 360° Skupna potrebna moč 1,5 kW Teža stroja cca. 170 kg Lodpfsfbh Aksx Al Nsrk Potrebni prostor približno 750 x 500 x 1800 mm Zobata letev je ukrivljena Hladilni sistem ni popoln, črpalka je prisotna V osnovi deluje

Stanje: dober (rabljeno), Leto izdelave: 2010, Article number: 302 0335 Drilling capacity: 34 mm Spindle taper: MT 4 Speed range: up to 6,650 rpm Throat depth: 285 mm Lrsdpjvk Runsfx Al Njk Table size: 420 x 400 mm Clamping surface: mm Stroke: 160 mm Distance table–spindle nose: 790 mm Total power requirement: 2.2 kW Accessories/Equipment: Condition: good Footprint: 600 x 920 mm Weight: 0.3 t Dimensions: 920 x 600 x 1,930 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Power output: 0.85 / 1.5 kW Speed range: 300 - 4000 rpm Ledpshpmbbsfx Al Nerk Speed settings: stepless Spindle taper: MK-3 (Morse taper 3) Drilling stroke: approx. 105 mm Spindle reach: 200 mm Weight: 152 kg

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Robust drilling machine with powerful OPTIMUM brushless drive. The machine's highlight is the menu-guided operation of the drilling/tapping working modes. - Smooth-running and powerful brushless drive - Optimal power transmission via aluminum belt pulleys combined with toothed GATES quality V-belt - High running smoothness thanks to ground multiple-spline driver - Concentricity accuracy guaranteed to be less than 0.015 mm (measured at the drill quill) Lrjdpfjw Rhk Rox Al Nsk - Drill spindle with precision ball bearings - Membrane keypad; dirt- and water-resistant, easy to clean - High-quality OPTIMUM keyless drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined drill table with diagonal T-slots, 360° rotatable - Surrounding coolant channel around the drill table - Large, height-adjustable safety shield with safety switch for maximum operator protection - Drill depth stop - V-belt cover with safety switch - V-belt tensioning mechanism - Solid, large base plate, heavily ribbed on the rear side Technical data: - Column diameter: 60 mm - Dimensions (LxWxH): approx. 552 x 445 x 850 mm - Weight: approx. 64 kg - Drilling capacity, steel: 18 mm - Continuous drilling capacity, steel: 16 mm - Tapping capacity, steel: M10 - Drill table: 230 x 245 mm - Speed range: 100 – 6000 rpm - Number of speed ranges: 5 - Total connected load: 1.5 kW - Supply voltage: 230 V - Quill travel: 65 mm - Spindle taper: MT 2 - Throat: 130 mm - Supplied with keyless drill chuck 1–13 mm - Supplied with machine vice BMP 100 Availability: short-term Storage location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2023, Optimum Optiturn TX 5216V – Used Machine. Machine bed made from heavily ribbed cast iron One-piece machine base made from steel High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron Precisely machined carriage Shafts mounted on needle bearings, all components lubricated in an oil bath Bed guideways hardened and precision ground All electronic controls centrally accessible All feed gearbox gears made of hardened steel Handwheels decoupled and inspected according to EN 23125 Dual-channel safety electronics Switches with life-cycle calculation, tested to EN ISO 13849 Full leadscrew and feed screw cover Fully illuminated work area Service-friendly removable rear panel Hardened and ground face plate spindle ensures exceptional accuracy and durability High material removal rate in rough machining thanks to large cutting capacity Energy chain for gentle cable and hose guidance Lockable chip guard travels with the carriage, featuring integrated position indicator and coolant hose, manually adjustable No change gears required Equipped with safety device against simultaneous operation of threading and feed mechanisms Electronic feed stop for the Z-axis Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete emptying and cleaning as per DIN Electrical position shutoff with quadruple position stop Three-jaw chuck included as standard Quick-change tool post SWH 7-C Tool holder 32 x 130 type D for 25 mm square tools Large spindle bore Dimensions and Weights Length approx. 2925 mm Width/Depth approx. 1195 mm Height approx. 1930 mm Weight approx. 2470 kg Work Area Centre height: 260 mm Centre distance: 1600 mm Swing over bed: 520 mm Swing over cross slide: 324 mm Bed width: 350 mm Speed Range Number of speed ranges: 2 x 3 steps Speed range: 12 – 1800 rpm Electrical Data Output (motor power): 7.5 kW Total connected load: 5.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant System Coolant pump power: 60 W Lrjdpfjx Hdq Tjx Al Nok Type of generated data: Usage data Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 72 mm Spindle Spindle mounting: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar pass-through diameter: 80 mm Tool post: SWH 7C Spindle taper: MK 7 Thread Cutting Metric pitch: 0.5 – 15 mm/rev Number of metric pitches: 55 Imperial pitch: 60 – 2 TPI Number of imperial pitches: 55 Diametral pitch: 120 – 4 DP Number of diametral pitches: 55 Module thread pitch: 0.25 – 7.5 mm x π Number of module pitches: 55 Travel Cross slide travel: 170 mm Compound rest travel: 340 mm Carriage travel: 1400 mm Feed Longitudinal feed range: 0.05 – 1.5 mm/rev Number of longitudinal feeds: 55 Flat feed range: 0.025 – 0.75 mm/rev Number of flat feeds: 55

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front Ledst U Rm Ispfx Al Nork - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Premer reza 128 mm Dolžina tračnega lista / mm Višina mize / mm Lrsdpfxjxbh Hfs Al Nok

Stanje: novo, Bench Drill OPTIMUM D 23 Pro-Set OPTIdrill – Demonstration Model – ----- Technical Data ----- Number of speeds: 12 steps Speed range: 200 – 2,440 rpm Spindle travel: 80 mm Throat depth: 180 mm Table size: 280 x 245 mm Lredpfx Aeu R S Exol Nek Maximum drilling capacity in steel: 25 mm Motor: 750 Watt Column diameter: 73 mm Dimensions (LxWxH): 615 x 330 x 1,015 mm Weight: 63.5 kg Spindle taper: MT 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch to IP 54 standard - Integrated digital drilling depth and speed display in the housing - Separate emergency stop push switch - Precision spindle boring - 24 V DC safety electrics - Guaranteed run-out accuracy less than 0.02 mm measured in the quill - Drill spindle with precision ball bearings - High-quality keyless drill chuck - Drilling depth stop - Precisely machined, robust drill table with diagonal T-slots and peripheral coolant channel - V-belt guard with safety switch - One-piece cast aluminium quill lever with soft-grip handles - Large, height-adjustable guard with safety switch - Heavy-duty construction throughout - GATES quality drive belt - Forward/reverse operation -- Scope of delivery -- Keyless drill chuck 1 – 16 mm Morse taper MT 2 / B16, T-slot nuts Special offer set including machine vice BMS 100 - New demonstration unit -

Stanje: novo, Vrtalno-rezalni stroj OPTIMUM OPTImill MB 4 - Razstavni stroj - Ta ponudba se nanaša na paket opreme. V ceno so že vključeni naslednji artikli in možnosti: - Vrtalno-rezalni stroj OPTImill MB 4 Optimum - Podstavek za stroj MSM 3 Optimum Lredpfxeu R Tfte Al Nsk - Set vpenjalnih tulec MK 4/ ER 32 - M16 Optimum - Set rezkarjev z ravnim steblom HSS IMUM - Precizni strojni primež FMS 100 Optimum - Nov razstavni stroj -

Stanje: novo, Leto izdelave: 2026, Heavy-duty design for the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency stop hammer switch Drilling depth stop LED machine light integrated in the drill head Precisely manufactured, stable drill table with diagonally arranged T-slots and all-round coolant channel Drill table tiltable ± 45° and rotatable 360° V-belt cover with safety switch Precision spindle bore Machine operation safety electrics: 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high load capacity and stability Heavy-duty, large base plate with T-slots Dimensions and Weights: Column diameter: 92 mm Length approx.: 945 mm Width/depth approx.: 485 mm Height approx.: 2040 mm Weight approx.: 162 kg Drilling Capacity: Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 25 mm Drill Table: Working surface length: 355 mm Working surface width: 355 mm T-slot type: diagonal T-slot size: 14 mm Number of T-slots: 2 Rotation: 360° Tilt: 45° Lredpfxog Uaiuo Al Nok Spindle-to-table distance max.: 784 mm Speed Range: Speed range: 120 – 1810 rpm Number of speed ranges: 9 Electrical Data: Connection voltage: 400 V Line frequency: 50 Hz Machine Base: Spindle-to-base distance max.: 1470 mm Working surface length: 230 mm Working surface width: 300 mm T-slot size: 16 mm Number of T-slots: 2 Spindle: Quill stroke: 125 mm Spindle mount: MT 4 Throat depth: 270 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 30 mm, hitrost vretena (min.): 40 obr/min, potovalna razdalja osi X: 145 mm, pomik po osi Z: 465 mm, največja hitrost vrtenja: 4.000 obr/min, širina na sredini: 650 mm, višina središča: 150 mm, nosilnost: 1.200 kg, globina grla: 4.000 mm, For sale is an as-new CNC lathe from the brand OPTIMUM, model OPTIturn L28HS. Ledpfey D Hkqjx Al Nsrk The machine is in like-new condition, originating from a vocational training institute (BFI), and was used exclusively for training purposes (setup and program transfer). Technical data: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 First commissioning: 2021 Center height: 150 mm Distance between centers: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Speed range: 40–4,000 rpm Spindle mount: Iso 702-1 No.3 – Type A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool turret: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Quill stroke: 80 mm Required installation space: 1,655 x 1,485 x 1,955 mm Note: The machine hours can be read out on site if you have the necessary knowledge. Since the machine was only used for training purposes, very low operating hours can be expected. Tools and tool holders are not included in the offer. Transport and loading can be organized Europe-wide upon request, subject to additional costs. Prices are plus VAT. Inspection available by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell one? For further information or to get in touch, visit our website.

Stanje: zelo dobro (rabljeno), Model: OPTIMUM L34HS Moč motorja: 3,7 kW Napajanje: 400 V / 50 Hz Maks. hitrost vretena: 3500 vrt./min Območje vrtljajev vretena: 30 – 3500 vrt./min Premer struženja nad posteljo: pribl. 350 mm Premer struženja nad suportom: pribl. 146 mm Razdalja med konicama: pribl. 600 mm Pomik osi X/Y/Z: pribl. 185 / 185 / 540 mm Lredpfx Aley E Npxj Nek Stožec vretena: MK 3 Masa: pribl. 1200 kg

Stanje: novo, Priložnost: stekleni moduli iz švicarske razgradnje, 96 steklenih modulov Lrjdpfsyxth Ssx Al Nsk

Leto izdelave: 2018, stanje: rabljeno, številka stroja/vozila: 11261804002, Premer struženja nad prečnim sani približno 146 mm; razdalja med konicama približno 600 mm, premer struženja približno 350 mm, maksimalno število vrtljajev vretena približno 3.500 vrt/min, minimalno število vrtljajev vretena: približno 30 - 3.500 vrt/min, pomik v oseh X/Y/Z približno 185/185/540 mm, vpenjanje: MK 3 Lodpfx Aljyztdro Nork

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 1.600 obr/min, potovalna razdalja osi X: 368 mm, pomik po osi Z: 2.900 mm, skupna višina: 1.925 mm, skupna širina: 1.525 mm, skupna masa: 3.820 kg, največja dolžina izdelka: 5.278 mm, število osi: 2, Horizontal lathe from 2022. This Optimum OptiTurn TH 8030D features a maximum turning diameter of 800 mm and a turning length of 250 mm. It is equipped with a robust spindle chuck and a rapid traverse speed of 3,800 mm/min. If you are looking for a high-quality lathe, you should consider the Optimum OptiTurn TH 8030D that we are offering for sale. Contact us for further details regarding this machine. • Type and Highlights • Lead and feed screw lathe, offering high flexibility, precision, and efficiency • Prepared for digital position indicator (see optional equipment) and quick-change tool post (see optional equipment) • Shipping Information • Packaging dimensions: Length 4,770 mm, Width 1,150 mm, Height 1,840 mm • Weights: Gross 4,480 kg, Net 3,870 kg • Technical Data • Load capacity: 1.4 t/m • Working areas: - Max. height: 400 mm - Swing over bed: 800 mm - Swing over cross slide: 570 mm - Bed width: 400 mm - Max. width: 3,050 mm - Swing in bed gap: 1,035 mm - Turning length in bed gap: 250 mm • Spindle speed range: - Number of speeds: 16 • Rapid traverse: - Rapid traverse speed: 3,800 mm/min - Max. duration of rapid traverse: 5 min (30 min. pause) Lsdpfx Aeyxncdjl Nork • Electrical Data: - Drive motor rating: 11 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - Electrical connections: Total rated value 12 kW • Coolant System: - Coolant pump capacity: 150 W • Spindle: - Spindle chuck: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar capacity diameter: 105 mm - Spindle taper Ø113 (taper 1:20) mm • Tool holder: max. clamping height 32 mm • Tailstock: - Tailstock taper: MK 5 - Tailstock quill stroke: 235 mm - Tailstock quill diameter: 90 mm • Thread cutting: - Metric thread pitch mm/rev (54 pitches) - Inch thread pitch 80 - 7/16 TPI (60 pitches) - Diametral pitch 7/8 - 160 (42 pitches) - Modular pitch 0.25 - 60 mm/rev (46 pitches) • Travel: - Top slide travel: 230 mm - Saddle travel: 2,900 mm - Cross slide travel: 368 mm • Feed: - Longitudinal feed range: 0.044 - 1.48 mm/rev (25 feeds) - Cross feed range: 0.022 - 0.74 mm/rev (25 feeds) • Build Features and Safety - Hardened and ground Z-axis guideways - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Precisely machined saddle; all guides adjustable via gib strips - Top slide swivel range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Shafts, gears, and main spindle run in oil bath - Gears smooth, hardened, and ground with 2 adjustable precision tapered roller bearings - User-friendly lever for feed rate adjustment - Enclosed rapid traverse gearbox - Gears and shafts hardened and ground, running in oil-bath in precision bearings - Handwheels decoupled and tested to EN 23125 - Dual-channel right-left switch, tested to EN 23125 - Switches with lifecycle calculation, tested to EN ISO 13849 - Right/left travel engaged via control shaft at the carriage - Central lubrication at the carriage - Coolant system with separate tank, level indicator, and oil separator; easy and complete drainage and cleaning per DIN - Lead screw drive - Emergency stop mushroom switch, motor protection switch, lockable main switch

Stanje: novo, Leto izdelave: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Including Accessories: - Set of 20 Packing Plates - RTE 165 Dividing Table - SPW 12 Clamping Tool Kit (58 pieces) - 4x SE55 Leveling Feet with Vibration Dampers - Collet Chuck Set MK4/M16 ER32 3-20 mm Heavy, solid cast-iron construction High smoothness of operation due to ground, oil-bath lubricated gearbox gears Clockwise/anticlockwise rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Coolant system Machine lamp Gear head swivels ±45° Substantial dovetail guide on the column, hand-scraped, for maximum stability and highest precision Height-adjustable, large protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/thread cutting function Substantial and large cross table, precisely surface-machined with T-slots and adjustable gib strips Heavy cast-iron machine stand with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speeds SINAMICS V20 inverter by SIEMENS Dimensions and Weights: Ledpfxsyxyivo Al Njrk Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling-Milling Head: Drilling-milling head tilt range ± 45 ° Drilling-Milling Capacity: Max. face mill size: 63 mm Max. shank cutter size: 26 mm Drilling capacity (steel, S235JR): 24 mm Continuous drilling capacity (steel, S235JR): 20 mm Electrical Data: Drive motor output: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal milling table: Length: 800 mm Width: 240 mm Vertical spindle - milling table max. distance: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant system: Coolant pump drive power: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel: X-axis, manual: 560 mm Y-axis, manual: 195 mm Z-axis, manual: 350 mm X-axis, automatic: 480 mm Vertical spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Quill diameter: 75 mm Quill stroke: 120 mm

Stanje: novo, Leto izdelave: 2021, Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with Accessories (New, Unused Condition): Including accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Set, 58-piece - Hydraulic Milling Vise HCV 105 - 20 liters of Cutting & Drilling Emulsion AQUACUT C1 - 4th Axis Prepared - Carousel Tool Changer with 12 tool stations - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - SIEMENS servo drive on all axes (closed-loop control) - Max spindle speed 10,000 rpm - Machine light in working area - Portable electronic handwheel with enable button and emergency stop switch - Coolant system with 120-liter coolant tank - Tool changing automatic or via push button (electropneumatic tool clamping device) Dimensions and weights: Length approx. 2164 mm Width/Depth approx. 1860 mm Height approx. 2200 mm Weight approx. 2800 kg Drilling & milling performance: Max face mill diameter 70 mm Max end mill diameter 35 mm Rapid traverse speed: X axis 15,000 mm/min Y axis 15,000 mm/min Z axis 15,000 mm/min Electrical data: Connection voltage 400 V Mains frequency 50 Hz Electrical connection: Total connected load 15 kVA Horizontal milling table: Length 800 mm Width 320 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 600 mm T-slot size 14 mm T-slot quantity 3 T-slot spacing 100 mm Max. table load 300 kg Accuracy: Repeatability ± 0.008 mm Positioning accuracy ± 0.008 mm Coolant system: Coolant pump drive power 650 W Tank capacity 120 l Pneumatic connection: Operating pressure 7 bar Travel paths: X axis automatic 550 mm Y axis automatic 305 mm Z axis automatic 460 mm Vertical spindle: Spindle taper BT 40 Speed range 10 – 10,000 rpm Continuous motor power S1 7.5 kW Motor power S6-30% operation 11 kW Motor torque S1 48 Nm Motor torque 30% duty S6 70 Nm Feed motor torque: X axis S1 8 Nm Y axis S1 8 Nm Z axis S1 11 Nm Tool changer: Design: Carousel Number of tool positions: 12 tools Max tool diameter 70 mm Max tool length 300 mm Max tool weight 6 kg Tool change time tool-to-tool (T to T) 7 s CNC Tool Starter Set BT 40: - 1 pc. face mill holder, mount 27 mm - 1 pc. keyless drill chuck 1.5 – 16 mm - 2 pcs each of Weldon 6 mm / 20 mm - 1 pc. each of Weldon 8 mm / 10 mm / 12 mm / 16 mm - 1 pc. adapter BT 40 to MK 3 - 4 pcs. collet holders ER 32 - 1 pc. collet wrench ER 32 Lodpfxoyxyhfj Al Nerk - 18-piece collet set ER 32 - 1 pc. height setting device - 1 pc. assembly and tooling aid - 15 pcs. pull studs Hydraulic Milling Vise HCV 105: - Sturdy construction for milling - Guideways hardened and ground - Booster system: low force input, high clamping force during operation - Wide clamping range due to locking pin with various hole spacings - Manufactured from high-quality stainless steel - Long service life due to high quality - High clamping force Jaw height 42 mm Jaw width 107 mm Clamping width 170 mm Length without handle 442 mm Overall height 107 mm T-slots 16 mm Clamping force 24.5 kN Clamping pressure 2500 kg Dimensions and weights: Weight approx. 22 kg

Leto izdelave: 2022, stanje: novo, Motor power: 1.1 kW / 230 V Cutting range: 100 mm x 145 mm Feed: infinitely variable Saw blade speed: 22 / 31 / 55 m/min Saw blade dimensions: 1638 x 13 x 0.65 mm Lrodpogulr Asfx Al Nsk Cutting angle: -45° to 60° Dimensions: 1085 mm x 498 mm x 978 mm Weight: 78 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Machine on display. Optimill F 310 HSC Premium CNC Milling Machine direct from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail with roller circulation in all axes for high load capacities • High-torque servo drives, direct to the ballscrews in all three axes • Precision-ground, preloaded high-performance ballscrews for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precise milling table with five T-slots, large dimensions and precision-ground • The portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup • Tool changer with 30-tool dual-arm gripper • Coolant system with chip-flushing setup and cleaning gun • Internal spindle coolant 20 bar • Band-type chip conveyor provides efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: warranty on material defects and free OSS Plus online/on-site service • 1-year Basic maintenance contract included in DE/AT/CH • Control • 15.6" color display • 16:9 format • Complete Package • Safety Integrated • Residual material detection and processing • ShopMill step programming • Manage network drive • 3D simulation • Trace function • Equipment Details • Inline spindle • Tool holder SK 40 / DIN 69871 • Spindle speed 12,000 rpm • Dimensions and Weights • Length: approx. 4319 mm • Width/Depth: approx. 2300 mm • Height: approx. 3000 mm • Weight: approx. 7000 kg • Rapid Traverse Speed • X-axis: 30 m/min • Y-axis: 30 m/min • Z-axis: 30 m/min • Electrical Data • Connection voltage: 400 V • Mains frequency: 50 Hz • Electrical connection • Total connected load: 56 kVA • Horizontal Milling Table • Length: 1200 mm • Width: 600 mm • T-slot size: 16 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Max. load capacity: 800 kg • Accuracy • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm • Travel • X-axis automatic: 1050 mm • Y-axis automatic: 600 mm • Z-axis automatic: 600 mm • Vertical Spindle • Spindle taper: SK 40 DIN 69871 • Speed range: 12,000 rpm • Main drive motor continuous operation S1: 20 kW • Main drive motor S6-30% operation: 50.3 kW • Main drive motor torque continuous S1: 96 Nm • Torque at 30% duty cycle S6: 240 Nm • Feed Force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 10 kN • Feed Motor Torque • X-axis continuous S1: 18 Nm • Y-axis continuous S1: 18 Nm Lsdpfjynf Unex Al Nerk • Z-axis continuous S1: 27 Nm • Tool Changer • Double arm gripper • Number of tool positions: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is located in the showroom and has only been used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. Lrodpfx Alsymlhre Nsk S400 HSC – The OPTIMUM premium CNC turning machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Heavy-duty construction · Compact design · SIEMENS servo motors on all axes · Renishaw measuring arm for tool measurement · All servo motors with integrated encoder for maximum accuracy · Main spindle implemented as motor spindle · 45° slant bed for particularly large machining diameters and unobstructed chip discharge into the chip tray · Hydraulic three-jaw chuck Ø 170 mm with soft jaws · Servo tool changer VDI 30 with 12 tool stations · Hardened and precision-ground ball screws for high rapid traverse speeds on all axes · Faster tool change speed · High hydraulic clamping force · Heavy-duty machining without vibration, for automated machining and high efficiency even under extreme conditions · Rigid linear guides ensure long service life with maximum static and dynamic stiffness · Device for manual tool measurement · Heat exchanger · Portable electronic handwheel with enabling button and emergency stop switch makes program setup significantly easier · Belt-type chip conveyor for efficient removal of chips · Work light for complete illumination of the working area · Coolant system with cleaning gun · RJ45 and power interface · EMC (electromagnetic compatibility) · Additional SIEMENS material defect liability and free online/on-site service OSS Plus; see "SIEMENS OSS Plus Package" on page 117 · 1 year basic maintenance contract included Machine specifications Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 25 kVA Spindle Drive motor S1 operation: 11.6 kW Torque drive motor S1 operation: 65 Nm Drive motor S6-30% operation: 14.4 kW Torque drive motor S6-30% operation: 81 Nm Spindle mount: A2-5 Spindle bore: Ø 56 mm Chuck passage: Ø 45 mm Hydraulic chuck: Ø 170 mm Coolant system Coolant pump output: 700 W Tank capacity: 160 liters Hydraulic system Hydraulic pump output: 1.5 kW Tank capacity: 36 liters Machine data Max. turning diameter: 220 mm Turning length: 320 mm Swing diameter over cross slide: 300 mm Swing diameter over bed: 500 mm Slant bed: 45° Speed range Spindle speeds*: 30 - 6,000 min⁻¹ Tool changer Type: Servo VDI 30 Number of tool stations: 12 Accuracy Repeat accuracy: ±0.004 mm Positioning accuracy: ±0.004 mm Travel X-axis: 180 mm Z-axis: 350 mm Feed force, dynamic X-axis: 3.6 kN Z-axis: 3.6 kN Feed rate X-axis / Z-axis: 30 m/min Motor torque X-axis / Z-axis: 6 Nm Dimensions Length x width x height: 2,000 x 2,250 x 1,550 mm Total weight: 2,600 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optiturn L28 HS CNC lathe - directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe equipped with Siemens SINUMERIK 808D Advanced PPU 150 control. - Reinforced machine bed made of cast iron - High-quality spindle bearing - Emergency stop push-switch - Centralized lubrication system - Reference switches - Maintenance-friendly protective enclosure - Rear maintenance access panel - Safety switch on the front sliding door - Turret positioned behind the turning center (left-hand turning tools) - Linear guides - Software package “SINUMERIK 808D on PC” included (practical training software allowing workpieces to be programmed and simulated offline on a PC; free to download) - Includes two-year SIEMENS warranty Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 3.75 kVA Spindle - Drive motor (S1 operation): 2.2 kW - Torque drive motor (S1 operation): 14 Nm - Torque at spindle: 28 Nm - Spindle mount: DIN 6350 A2-3 - Spindle taper: 5C - Spindle bore: Ø 30 mm Coolant System - Coolant pump power: 95 W - Tank capacity: 25 liters Machine Data - Center height: 169 mm - Center distance: 430 mm - Swing over cross slide: Ø 200 mm - Swing over bed: Ø 300 mm Speed Range - Spindle speeds*: 40 - 4,000 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum tool shank size (square): 16 mm - Maximum boring bar diameter: 16 mm Precision - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed Rate - X-axis: 10,000 mm/min Lsdpsymlf Rofx Al Nork - Z-axis: 12,000 mm/min Machine leasing available via Siemens Finance (subject to liquidity).

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optiturn L34 HS CNC lathe - Directly from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of grey cast iron - Sophisticated spindle bearing system - Emergency stop punch button - Central lubrication - Spindle and feed motors supplied by Siemens - Maintenance-friendly protective enclosure - Rear service access panel for maintenance - Safety interlock on the front sliding door - Turret is located behind the turning center (left-hand turning tools) - Linear guideways - "SINUMERIK 808D on PC" software package included (practical training software that allows workpieces to be programmed and simulated offline on a PC; free to download) Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle mount: DIN 6350 A2-3 - Spindle bore: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine Data - Center height: 165 mm - Center distance: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 - 3500 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum square tool size (height/width): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm Lodpfx Aleymlfko Nerk - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance, subject to liquidity.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 HSC Premium CNC Milling Machine, direct from the manufacturer. F 110 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Robust, torsion-resistant machine base with strong ribbing · Profile rail with recirculating ball bearings for high rapid traverse speeds in all axes · High-torque servo drives in all three axes · Telescopic way covers on all three axes · Automatic lubrication · Solid, precise milling table with three T-slots, generously dimensioned and precision ground · The portable electronic handwheel with enabling button and emergency stop pushbutton greatly facilitates program setup · Coolant system with chip flush and cleaning gun · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger for optimal temperature control and prevention of dust ingress · Machine light in the working area · Additional SIEMENS warranty for material defects and free online/on-site service OSS Plus · 1-year basic maintenance contract included for Germany/Austria/Switzerland Spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 operation: 9 kW Torque, drive motor S1: 57 Nm Drive motor S6-30% operation: 21.2 kW Torque, drive motor S6-30%: 135 Nm Spindle taper: SK 40 / DIN 69871 Optional internal spindle cooling Drive motor S1 operation: 10.5 kW Torque, drive motor S1: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque, drive motor S6-30%: 125 Nm Cooling lubricant system Coolant pump output (2 units): 900 W Lrjdpfx Aljymka Hj Njk Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (if adjacent stations are empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel distances X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed drive Rapid traverse (X, Y, Z): 48 / 48 / 32 m/min Motor torque (X/Y/Z): 11 Nm / 11 Nm / 20 Nm Feed forces X/Y/Z: 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–600 mm Table (L x W): 850 x 400 mm T-slot size/quantity/spacing: 18 mm / 3 / 100 mm Max. table load: 400 kg Dimensions L x W x H: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F 200 HSC Premium CNC milling machine, direct from the manufacturer. F 200 HSC – The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile rails with roller guides enable high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, generously dimensioned and ground for precision · The portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup · Coolant system with chip flushing and cleaning gun · Through-spindle cooling with 20 bar · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 connector and 230 V power outlet · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents dirt particle ingress · Machine light in the work area · SIEMENS extended warranty package for material defects plus free online/on-site OSS Plus service · 1-year Basic maintenance contract included (valid in Germany/Austria/Switzerland) Milling spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Motor torque S1 operation: 50 Nm Drive motor S6-30% operation: 26.4 kW Motor torque S6-30% operation: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant lubrication system Pump output (3 pumps): 1 kW Flow rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations free): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drives Rapid traverse X, Y, Z: 48 m/min Motor torque X/Y/Z: 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z: 5.34 kN / 5.34 kN / 6.68 kN Spindle speed range Lsdsymd Hmjpfx Al Nsrk Speeds*: 12,000 rpm Pneumatics Air pressure: 6–8 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–650 mm Table dimensions (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. load capacity: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg !!!Image optionally shown with 3D printer, not included in the price!!!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM premium CNC milling machine equipped with the Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail guides with roller bearings in all axes for high load capacity • High-torque servo drives mounted directly to the ballscrews in all three axes • Precision-ground, preloaded, high-performance ballscrews for rapid traverse speeds in all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with up to 15,000 rpm and inline spindle • Solid, precise milling table with five T-slots, generously dimensioned and precision-ground • Portable electronic handwheel with enabling button and emergency stop button greatly simplifies program setup • Tool changer with double gripper and 30-tool capacity • Coolant system with chip flushing and cleaning pistol • Through-spindle coolant supply at 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Work area machine lamp • Additional Siemens package: material defect liability and free Online-/On-site-Service OSS Plus • 1-year Basic maintenance contract included in DE/AT/CH • Control system features • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Siemens OSS PLUS add-on package • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 • Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions and weights • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg • Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min • Electrical data • Connection voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA • Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 Ljdpfjymd Epox Al Nerk • T-slot spacing 100 mm • Max. load capacity 800 kg • Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm • Travel • X-axis automatic 1000 mm • Y-axis automatic 620 mm • Z-axis automatic 630 mm • Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Drive motor power S1 continuous operation 20 kW • Drive motor power S6-30% operation 52.4 kW • Drive motor torque S1 continuous operation 96 Nm • Drive motor torque S6 30% operation 250 Nm • Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 12.01 kN • Feed motor torque • X-axis continuous operation S1 20 Nm • Y-axis continuous operation S1 20 Nm • Z-axis continuous operation S1 36 Nm • Tool changer • Double arm gripper • Number of tool stations 30 • Max. tool length 300 mm • Max. tool weight 8 kg • Tool-to-tool change time 2.5 s