Stacionarni ekstrakcijski sistem

Optimat OT 6500 m3h

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 Pgodpfx Alsd H Rf Tstep • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: novo, Leto izdelave: 2026, Extraction capacity approx. 8,900 m³/h Motor power 7.5 kW Speed 3,000 rpm Rated voltage 400 V, 50 Hz Exhaust pipe 300/200 mm Extraction speed 28 m/sec Number of filters 45 Filter category G Filter material Polyester Noise level 80 dB without connection / 65 dB when connected to the machine via a duct Filter surface area 22 m² Dimensions 920 x 2,260 x 2,250 mm Weight 450 kg Podpfx Aov Dvbasltogp Vacuum 3,000 Pa 3-micron polyester filters 2 collection bins Chassis Filter cleaning via vibration system with control unit + €850 for the model with fire suppression system (Safe System) + €550 for the inverter model (variable speed drive)

Stanje: rabljeno, Leto izdelave: 2008, without briquetting press Filter area 32 m² with hopper transition to container or connection to rotary valve Used, excellent condition, low operating hours Manufacturer: Schuko Model: Vacomat 300 Year of manufacture: 2008 Clean air unit / negative pressure GS dust-tested, BIA-certified CE type-certified Motor: 7.5 kW Connection diameter: 300 mm Pressure (Pa): 3090 Air flow rate: 5,800 m³/h Control panel Filter pressure monitor Psdpfxsvxlqmo Altogp Extinguishing system: powder extinguisher New price approx. €17,000.00 Space requirement approx. 3,600 x 1,590 x 2,550 mm / 4,400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Pgedpfxefxpbmj Altep

Stanje: dober (rabljeno), Stroj je sestavljen iz dveh enot in ima naslednje funkcije: 1. Vrtanje lukenj za grče 2. Rezkanje moznikov 3. Vbrizg lepila 4. Vtikanje moznika Popolnoma očiščen lepilni sistem; Podpfxetpqafs Altegp Pozicijski laser; Pošljemo vam lahko video delovanja stroja. Čas procesa je približno 3 sekunde na takt. Pokličete ali nam pišete. Govorimo in pišemo nemško in rusko. Sporočila lahko pošljete tudi v angleščini. 5.3.4

Leto izdelave: 2013, stanje: dober (rabljeno), Univerzalni preizkuševalni stroj Zwick/roll Tip: 1488 Posodobljen leta 2013 s programsko opremo Največja preskusna sila: 200 kN Pgjdpfxexw N Uvj Altop Potreben prostor: Širina: 2.000 mm Višina: 2.100 mm Globina: 800 mm Teža pribl. 1.000 kg.

Stanje: dober (rabljeno), Surface grinding machine, grinding machine Pjdpfx Asd A Idxsltjgp - Hydraulically operated horizontal surface grinding machine - Magnetic chuck: 300 x 150 mm - Grinding wheel motor: 1.1 kW, 2800 rpm - Water cooling system with filter - Grinding wheel diameter: 200 mm - Transport dimensions: 1470/1170/H1920 mm - Weight: 1090 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Biesse Akron 1330 A Kantenanleimmaschine Einseitige Kantenanleimmaschine AKRON 1330-A Leimauftragseinheit SP03 Kappenaggregat IT03 Feintrimmaggregat RF02 Eckenrundungsaggregat AR02 VORFRÄSAGGREGAT RT02 mit symmetrischen Diamantwerkzeugen H=45 mm Z=2+2 30°, inklusive. KANTENSCHABER RB02 (Werkzeuge nicht enthalten) LEIMSCHABER-EINHEIT RC02 BÜRSTAGGREGAT SZ02 ERGÄNZENDE SEITLICHE WERKSTÜCKUNTERSTÜTZUNG MONTAGEKIT FÜR RÜCKFÜHRUNGSSYSTEM HANDEINSCHUBVORRICHTUNG FÜR SCHMALE TEILE SET ZUR BEARBEITUNG VON "SHADOW LINE"-PROFILPLATTEN GERADER LUFTTISCH AM MASCHINENZUFÜHRBEREICH ANTIHAFTMITTELSYSTEM ADZ02 PAAR DIAMANTIERTE FRÄSER H=65 mm Z=2+2 30°. Zum Austausch der Standardwerkzeuge. HYBRID-LEIMAUFNAHMEEINHEIT FÜR GRANULAT-EVA/PUR-LEIM STATT STANDARD-SYSTEM TM15 HYBRID-VORSCHMELZER FÜR EVA/PUR-LEIM ADAPTIVE INFRAROTLAMPE AdIRL-700 AX-4, NC-ACHSE AM FEINSCHNEIDAGGREGAT PRO-NESTING-KIT FÜR DAS FEINSCHNEIDAGGREGAT Paar Mehrprofilfräser für das Feinschneidaggregat: Fase 25 Grad, R=2 mm + R=1 mm, gerades Profil für Massivholz AX-2, NC-ACHSE AM ECKENRUNDUNGSAGGREGAT NUR RUNDFUNKTION SCHIEBEEINHEIT FÜR DAS ECKENRUNDUNGSAGGREGAT Paar Fräser, R=2 mm, für Eckenrundungsaggregat Paar Fräser, R=1 mm, für Eckenrundungsaggregat AX-4, NC-ACHSE AM KANTENSCHABER PRO-NESTING-KIT FÜR DEN KANTENSCHABER Paar Messer R=2 mm, für Kantenschaber Paar Messer R=1 mm, für Kantenschaber REINIGUNGSEINHEIT LPT02 (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Podeyyb Icepfx Altjgp Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, potovalna razdalja osi X: 495 mm, pomik po osi Z: 780 mm, moč vretenovega motorja: 37.000 W, največja hitrost vretena: 2.000 obr/min, skupna višina: 3.636 mm, skupna širina: 2.860 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-F Plus iHMI-Touch, največja dolžina izdelka: 2.005 mm, število osi: 3, Ta 3-osna vertikalna stružnica tipa DN SOLUTIONS PUMA V8300MR je bila izdelana leta 2023. Stanje je kot novo, primerna za razstavni prostor. Ima maksimalni premer obdelovanca 830 mm in dolžino obdelovanca 690 mm. Stroj je opremljen z zmogljivo vreteno, ki zagotavlja navor 2.592 Nm in hitro premikanje 20 m/min. Če iščete visokokakovostno stružnico, razmislite o modelu DN SOLUTIONS PUMA V8300MR, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Stanje: Razstavni eksponat, kot novo • Velikost vpenjalne glave (glavno vreteno): do 15" (380 mm) (ni vključeno v dobavo) • Premer obdelovanca (palica): 60 mm • Hitro premikanje (X/Z): 20 / 20 m/min • Navor vretena: 2.592 Nm • Maks. premer obdelovanca: 830 mm • Maks. dolžina obdelovanca: 690 mm • Število orodij: 12 • Nosilec orodja: BMT 75P • Tip vodil: pravokotno vodilo • Velikost monitorja: 19" • Glavne značilnosti: • Zmogljivo, zelo kompaktno vertikalno stružnico • Statično vreteno; optimalno obremenitev z žerjavom in dobra dostopnost za operaterja • Izjemno trden liti postel • Glavno vreteno z visokim navorom • Kompaktna konstrukcija stroja • Po želji pogonjena orodja z visokim navorom (možnost) • Kakovostna, robustna pravokotna vodila • Hitro premikanje do 20 m/min Dodatna oprema Podpfx Aloyrr Rwstjgp • Črpalka za hladilno tekočino, 10 barov • Ločevalnik olja • 3-barvna opozorilna luč • Po želji: odvajalec sekancev (tekoči trak). Cena na zahtevo • Stroj je dobavljen z standardnim osnovnim paketom: vrtljak je popolnoma opremljen, vključno z osnovno montažo. Tehnične specifikacije Pogonska orodja: Ne

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, stiskalna sila: 500 t, SORG Four-Column Press – 500 t – 1,100 × 800 mm – Calibration Press For sale is a hydraulic four-column press (calibration press) manufactured by SORG, with a press force of 500 tons. This machine is designed for precise calibration and forming processes, offering high repeat accuracy alongside rapid operation. Its robust construction and high-performance hydraulics make it ideal for industrial series production and demanding precision applications. ==== Technical Data & Information: Pgedsffamvspfx Altjp Hydraulic Four-Column Press – Calibration Press – 500 t ==== General Specifications - Manufacturer: SORG - Model: Four-Column Press - Machine Designation: Calibration Press - Construction Type: Four-Column Press - Press Force: 500 t - Machine Weight: approx. 22.8 t - Overall Height Above Floor: approx. 5,100 mm - Minimum Factory Hall Height: 6,500 mm ==== Working Area - Pass-Through Width: 1,100 mm - Installation Height: 800 mm - Stroke: 600 mm - Table Height Above Floor: 900 mm ==== Table & Ram - Table Area: 1,100 × 800 mm - Ram Area: 1,100 × 800 mm - Max. Tool Weight: 2,000 kg - Max. Upper Tool Weight: 1,000 kg ==== Speeds - Closing Speed: 60–200 mm/sec - Pressing Speed: 0–9.5 mm/sec - Opening Speed: 28–200 mm/sec ==== Hydraulics & Performance - Hydraulic Pressure: 300 bar - Main Motor: 75 kW - Pump Capacity: approx. 270 l/min - Oil Tank: 600 l - Number of Press Cylinders: 1 unit - Number of Traverse Cylinders: 2 units ==== Control & Safety - Control System: Siemens S7 - Safety Control: Pilz Multi - Precise pressure and movement control for calibration processes ==== Application & Features - High repeat accuracy - Suitable for calibration, pressing and forming processes - Robust construction for continuous operation ===== Calibrating, Forming, Series Production, Precision Forming, Toolmaking Hydraulic Press, Calibration Press, Four-Column Press, Forming Press, Industrial Press, Production Press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quote. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements by fully complying with the Brazilian national safety standard NR 12, which is based on these requirements. Our core strength lies in special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses mainly use components from leading European manufacturers.