Erozija cinkove iskre

OPS INGERSOLL Gantry Eagle 800

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Completely Refurbished OPS Ingersoll Gantry 800 Eagle Die-Sinking EDM Machine – Technically and Visually in Excellent Condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and optical condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts, including ball bearings and drive spindles, were carefully inspected and replaced as needed. A complete geometric measurement, alignment, and additional inspection using a laser measuring system were subsequently performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic lines, were completely replaced. Additionally, the machine received a complete new paint job and is visually in very well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's climate unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Fedpfoyr I Aiex Abvopd Technical data: - Ingersoll (OPS Ingersoll) - Die-sinking EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld controller - Manual EDM operation with Powertec Handheld - High Speed Jump: max. 18 m/min - Generator output: 60 ampere, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up disk changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Worktable (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special equipment: - Linear measuring system on all axes (Z standard for the series)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, leto zadnje generalne obnove: 2004, 4-Hi CRM Froehling Laminierkopf Froehling ist eine renommierte Marke, bekannt für Zuverlässigkeit und Robustheit im Bereich der Walzwerke. 4-Hi-Laminierkopf mit Biegeeinrichtung und Ab- bzw. Aufwickler. Technische Daten: Hersteller: FROEHLING (Deutschland) – 2004 generalüberholt Verarbeitbare Materialien: Aluminiumlegierungen, Messing, Kupfer, niedrigkohlenhaltiger Stahl Bandbreite: 282 mm (300 mm) Banddicke: 0,15 – 2 mm Coilabmessung: ID 400 mm – AD 1500 mm Maximale Walzgeschwindigkeit: 400 m/min Arbeitswalzen: Durchmesser 130 mm – Tisch 340 mm Stützwalzen: Durchmesser 390 mm – Tisch 335 mm Komplett mit: Abwickelhaspel und Aufwickelhaspel Viele Ersatzsätze an Arbeits- und Stützwalzen vorhanden Verkauf erfolgt EXWORKS, demontiert und auf LKW verladen. Fpjdeg Ryqkspfx Abvsd Jederzeit zur Besichtigung für interessierte Käufer bereit. Bei Fragen stehen wir Ihnen gerne zur Verfügung. UNTERBREITEN SIE UNS IHR ANGEBOT, WIR FINDEN SICHER EINE EINIGUNG.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 2.000 kg, širina mize: 760 mm, tabela razdalje do vretena: 585 mm, dolžina mize: 1.000 mm, dolžina obdelovanca (maks.): 1.095 mm, širina obdelovanca (maks.): 795 mm, višina obdelovanca (maks.): 480 mm, skupna masa: 6.800 kg, leto zadnje generalne obnove: 2025, obremenitev mize: 2.000 kg, hitri pomik na osi Z: 18 m/min, Oprema: dokumentacija / priročnik, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" touchscreen monitor MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM processing with Powertec Handheld EAGLE Powertec fine finishing generator PT 60, 60 amps High Speed Jump max. 18,000 mm/min. Travel paths (X, Y, Z): 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Fsdpfx Ajyrqprobvjpd Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (customer choice) ECOTEC energy-saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Completely Refurbished OPS Ingersoll Gantry 800 Eagle Die-Sinking EDM Machine – Technically and Visually in Excellent Condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and optical condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts, including ball bearings and drive spindles, were carefully inspected and replaced as needed. A complete geometric measurement, alignment, and additional inspection using a laser measuring system were subsequently performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic lines, were completely replaced. Additionally, the machine received a complete new paint job and is visually in very well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's climate unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Ingersoll (OPS Ingersoll) - Die-sinking EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld controller - Manual EDM operation with Powertec Handheld - High Speed Jump: max. 18 m/min - Generator output: 60 ampere, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up disk changer Fedsykn Ngjpfx Abvopd - Work tank (W x D x H): 800 x 1100 x 480 mm - Worktable (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special equipment: - Linear measuring system on all axes (Z standard for the series)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 475 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, teža obdelovanca (maks.): 200 kg, največja hitrost vrtenja: 42.000 obr/min, premer mize: 450 mm, 5-Axis Röders Tec RXP800DS - Fully Refurbished - The machine is completely overhauled, inspected, and measured in our facility. The machine once again meets original factory tolerances! Working Area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance Height: 500 mm Fpsdpfx Abjvvlmcovod Tool Changer: 52 positions Spindle: HSK40E, max. 42,000 rpm Tool Measurement Laser for tool calibration Handheld Control Unit Minimum Quantity Lubrication Prepared for extraction system (e.g. for graphite machining) Spindle Compensation Precision Package CNC Control: Röders RMS6, latest version The machine can be viewed in operational condition at any time. For more information about the type and scope of our refurbished machines, please visit our website or our Hüttmann YouTube channel.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 2.000 kg, širina mize: 760 mm, tabela razdalje do vretena: 585 mm, dolžina mize: 1.000 mm, dolžina obdelovanca (maks.): 1.095 mm, širina obdelovanca (maks.): 795 mm, višina obdelovanca (maks.): 480 mm, skupna masa: 6.800 kg, leto zadnje generalne obnove: 2025, obremenitev mize: 2.000 kg, hitri pomik na osi Z: 18 m/min, Oprema: dokumentacija / priročnik, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" touchscreen monitor MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM processing with Powertec Handheld EAGLE Powertec fine finishing generator PT 60, 60 amps High Speed Jump max. 18,000 mm/min. Travel paths (X, Y, Z): 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (customer choice) Fjdpfxsyi Uaio Abvjpd ECOTEC energy-saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 575415, Teža: 6.700 kg, različna periferija, upravljanje, 1 manipulacijski sistem OPS INGERSOLL IMC 5, leto izdelave: 2008, serijska št.: 583080, teža: 1.800 kg, 1 hladilna enota M.T.A. TAE EVO M10, leto izdelave: 2012, 1 protipožarni sistem KRAFT & BAUER FB 703. Fpedpjyidk Iefx Abvjd

Stanje: rabljeno, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range in mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. [missing data] Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with hold-down roller Straightening machine MR 250/4: Strip entry height: 1250 mm Fpjdpfx Aofn Aqmjbvjd The system has been dismantled, tested, and newly painted.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Cell with Kuka KR 180 Grinding Robot Grinding cell Berger 2012 (External grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 control system - Additional axis (7th axis) Belt grinding station BSS10 Fpedpfxog Saqvj Abvjd - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Gripper exchange cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to manufacture each detail as seen in the video.

Stanje: novo, Fastech Horizontal Bandsaw Semi-Automatic BMSY 360 DGH ECO Round cutting capacity (mm): 360 Flat cutting capacity (mm): 510 x 360 Square cutting capacity (mm): 360 +30° round cutting capacity (mm): 360 +30° flat cutting capacity (mm): 440 x 360 +30° square cutting capacity (mm): 360 +45° round cutting capacity (mm): 360 +45° flat cutting capacity (mm): 390 x 360 +45° square cutting capacity (mm): 360 +60° round cutting capacity (mm): 200 +60° flat cutting capacity (mm): 200 x 360 +60° square cutting capacity (mm): 200 -30° round cutting capacity (mm): 360 Fpjdpfx Abjg Ekttsvod -30° flat cutting capacity (mm): 440 x 360 -30° square cutting capacity (mm): 360 -45° round cutting capacity (mm): 360 -45° flat cutting capacity (mm): 390 x 360 -45° square cutting capacity (mm): 360 -60° round cutting capacity (mm): 260 -60° flat cutting capacity (mm): 260 x 360 -60° square cutting capacity (mm): 260 Main drive motor output (kW): 3 Hydraulic pump power (kW): 0.37 Coolant pump motor power (kW): 0.12 Infinitely variable band speed: 20-100 m/min Saw band dimensions (mm): 4800x34x1.1 Table height (mm): 860 Weight (kg): 1,450 Length / Depth / Height (mm): 2,650 / 1,210 / 1,870 Double-mitre bandsaw Infinitely variable band speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw blade tensioning Saw blade cleaning brush Digital mitre angle display