Potopna elektroerozijska naprava (EDM)

OPS Ingersoll Gantry EAGLE 800 Generalüberholt -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 2.000 kg, širina mize: 760 mm, tabela razdalje do vretena: 585 mm, dolžina mize: 1.000 mm, dolžina obdelovanca (maks.): 1.095 mm, širina obdelovanca (maks.): 795 mm, višina obdelovanca (maks.): 480 mm, skupna masa: 6.800 kg, leto zadnje generalne obnove: 2025, obremenitev mize: 2.000 kg, hitri pomik na osi Z: 18 m/min, Oprema: dokumentacija / priročnik, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" touchscreen monitor MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM processing with Powertec Handheld EAGLE Powertec fine finishing generator PT 60, 60 amps High Speed Jump max. 18,000 mm/min. Ljdeyi Uaijpfx Al Njhf Travel paths (X, Y, Z): 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (customer choice) ECOTEC energy-saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Stanje: zelo dobro (rabljeno), Moretto Server + 4 Filters (2014) Lsdpjikni Ijfx Al Nshf

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 2.0122, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, Functional, but requires a certain amount of time after being disconnected from the power supply before operating properly again. Lodpfx Asu Iufpel Nehf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2013-5191, Ultrazvočna čistilna naprava, manj kot 2 delovni uri Lhsdsxqnqpjpfx Al Nsf

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Completely Refurbished OPS Ingersoll Gantry 800 Eagle Die-Sinking EDM Machine – Technically and Visually in Excellent Condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and optical condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts, including ball bearings and drive spindles, were carefully inspected and replaced as needed. A complete geometric measurement, alignment, and additional inspection using a laser measuring system were subsequently performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic lines, were completely replaced. Additionally, the machine received a complete new paint job and is visually in very well-maintained condition. Lhedpjyr I Aijfx Al Nsf The generator and control system were cleaned and technically inspected. The generator's climate unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Ingersoll (OPS Ingersoll) - Die-sinking EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld controller - Manual EDM operation with Powertec Handheld - High Speed Jump: max. 18 m/min - Generator output: 60 ampere, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up disk changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Worktable (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special equipment: - Linear measuring system on all axes (Z standard for the series)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, teža obdelovanca (maks.): 500 kg, skupna višina: 2.398 mm, skupna širina: 1.690 mm, skupna dolžina: 1.900 mm, poteza s peresom: 300 mm, dolžina obdelovanca (maks.): 790 mm, širina obdelovanca (maks.): 530 mm, višina obdelovanca (maks.): 275 mm, skupna masa: 2.800 kg, kapaciteta rezervoarja: 410 l, Charmilles Roboform 350 Année de construction : 2007 Machine à électroérosion par enfonçage type C Table fixe avec bac abaissable Courses (X/Y/Z) : 350 x 250 x 300 mm Dimensions maximales de la pièce : 790 x 530 x 275 mm Poids maximal de la pièce : 500 kg Hauteur de bain programmable : 100-325 mm Inclus : mandrin pneumatique Erowa ITS 50 / 3R Systems / Hirschmann (au choix) Poids maximal de l'électrode : 50 kg Sans changeur d’électrodes Lsdjyu N Skjpfx Al Njhf Interface utilisateur Charmilles DPControl Commande via écran tactile couleur LCD 12'' Clavier et boîtier de commande portatif également disponibles Dimensions de la machine : 1900 x 1690 x 2522 mm Poids total : 2800 kg La machine sera nettoyée et entretenue par nos soins après réception de commande. Un test d’érosion sera ensuite effectué. Nous pouvons mettre la machine en service chez vous et former vos opérateurs. En option : - Transport - Groupe frigorifique - Fluide diélectrique - Dispositifs de serrage

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Completely Refurbished OPS Ingersoll Gantry 800 Eagle Die-Sinking EDM Machine – Technically and Visually in Excellent Condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and optical condition. Ledjykn Ngopfx Al Njhf During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts, including ball bearings and drive spindles, were carefully inspected and replaced as needed. A complete geometric measurement, alignment, and additional inspection using a laser measuring system were subsequently performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic lines, were completely replaced. Additionally, the machine received a complete new paint job and is visually in very well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's climate unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Ingersoll (OPS Ingersoll) - Die-sinking EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld controller - Manual EDM operation with Powertec Handheld - High Speed Jump: max. 18 m/min - Generator output: 60 ampere, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up disk changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Worktable (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special equipment: - Linear measuring system on all axes (Z standard for the series)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 525 mm, pomik osi Y: 400 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 1.000 kg, višina obdelovanca (maks.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition This machine has undergone a comprehensive and professional overhaul in our facilities, and is in outstanding technical and visual condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as needed, including ball rollers and drive spindles. Subsequently, a full geometric measurement, alignment, and additional inspection using a laser measuring system were performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, have been completely replaced. Additionally, the machine has been freshly painted and is visually in excellent, well-maintained condition. The generator and control system were cleaned and technically checked. The generator’s climate control unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing according to OPS Ingersoll’s quality and testing standards. The machine is immediately ready for use and is ideal for reliable production operation. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Machine type: Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld – multifunctional hand control device Manual EDM with Powertec Handheld High Speed Jump max. 18 m/min Generator output: 60 amps, EAGLE Powertec Travel distances (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up rotary changer Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Ledsyzw I Ijpfx Al Nehf Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special Equipment: Linear measuring system on all axes (Z-axis standard)

Stanje: rabljeno, Leto izdelave: 1999, Potopne erozijske naprave / EDM Lhedpeyq E Sxefx Al Nsf Pomik X: 400 mm Pomik Y: 300 mm Pomik Z: 300 mm Velikost mize X: 550 mm Velikost mize Y: 470 mm maks. velikost obdelovanca X: 700 mm maks. velikost obdelovanca Y: 500 mm maks. velikost obdelovanca Z: 250 mm maks. teža elektrode: 50 kg maks. teža obdelovanca: 500 kg menjalnik elektrod: 20-kratni generator: 50 amperov spustljiv rezervoar Krmiljenje CNC-krmilje: Mitsubishi 32-bit EDM krmilje

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 525 mm, pomik osi Y: 400 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 1.000 kg, višina obdelovanca (maks.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition This machine has undergone a comprehensive and professional overhaul in our facilities, and is in outstanding technical and visual condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as needed, including ball rollers and drive spindles. Subsequently, a full geometric measurement, alignment, and additional inspection using a laser measuring system were performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, have been completely replaced. Additionally, the machine has been freshly painted and is visually in excellent, well-maintained condition. Ledpoyrqpfsfx Al Nehf The generator and control system were cleaned and technically checked. The generator’s climate control unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing according to OPS Ingersoll’s quality and testing standards. The machine is immediately ready for use and is ideal for reliable production operation. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Machine type: Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld – multifunctional hand control device Manual EDM with Powertec Handheld High Speed Jump max. 18 m/min Generator output: 60 amps, EAGLE Powertec Travel distances (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up rotary changer Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special Equipment: Linear measuring system on all axes (Z-axis standard)