Stroj za elektroerozijsko globljenje

Zimmer & Kreim PEC 600 Senkerodiermaschine

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Bjdpfjixntwsx Afqjdk Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Bdedpfxount Eyj Afqok Total power requirement: kW Machine weight approx. 3.8 t Space requirement approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Stanje: rabljeno, Leto izdelave: 2009, Technical details: Basket dimensions: 1160 x 600 x 500 mm Heating power: 4 kW Rated power: 16 kW Rated current: 400V / 50/60 Hz Heating power: 4 kW Temperature range: 0 - 60 °C Machine weight approx.: 0.308 t Dimensions (L x W x H): 1.5 x 1.0 x 0.95 m Application: Suitable for use in workshops, manufacturing, and service operations The ultrasonic cleaning unit (bath) is equipped with an external generator for two modules. Type: MW 2000 GT with a 25 kHz frequency range Sonic output: 2 x 2000 watts, adjustable in 9 steps Continuous mode/pulse mode or ultrasonic time/cleaning time adjustable (Possible output up to 11 kW) Bdedpfx Afeu Nu Iyjqsk The housing, basket insert, and lid are made of stainless steel. Internal dimensions: L: 1160 x W: 600 x D: 500 mm (up to the outlet: 410 mm) Protection rating: IP23 The washer is mounted on a drip tray.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, General Tool Magazine: 2x chain-type magazines with 32 stations each Rapid Traverse X/Y/Z: 48 m/min Travel Range X/Y/Z: 800/900/620 mm Spindle Technology: Direct drive Speed: 15,000 rpm Tool Holder: HSK-A63 NC Rotary Table Technology: Swivel rotary table with torque drive, manufacturer Kessler A axis: +/- 120° C axis: 360° Clamping Surface: ø800 mm Table Load (max.): 1,000 kg Workpiece Dimensions (max.): ø800 x 500 mm Equipment Position Measuring System: Direct (glass scales) on all axes Chip Management: Chip conveyor Coolant Management: Through-spindle coolant system with filter and high pressure, 18 bar Workpiece Measurement: Probe, Heidenhain TS 740 Tool Measurement: Laser, BLUM Setup Mode: Electronic handwheel Additional Equipment: Spindle chiller Bodpfx Afour Ng Ujqedk

Stanje: nepreverjeno (rabljeno), Oglejte si tehnične podatke na fotografiji. Bdsdpfx Afohvzxzsqjk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: U268893501006, potovalna razdalja osi X: 600 mm, pomik osi Y: 770 mm, pomik po osi Z: 805 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 640, največja hitrost vretena: 16.000 obr/min, dovod hladilne tekočine: 40 letvica, število mest v zalogovniku orodij: 90, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Highlights: - Powerful motor spindle with 16,000 rpm - 90 tools in the system - Prepared for automation ____ Base machine G350-1006 access SERIES X-axis travel: 600 mm Y'-axis travel: 770 mm Z-axis travel: 805 mm Power supply: 400 V, 50 Hz, TN-S Compressed air system, operating pressure 5 bar, minimum inlet pressure 5 bar Automatic working area door for manual and automatic loading/unloading Decentralized workspace extraction system Machine protection concept for emulsion machining Workspace lighting Machine painting according to GROB standard Machine cooling system with air-cooled chiller (4.0 kW) Operating/environmental conditions according to GROB standard Electrical equipment according to GROB EU standard Workspace internal paneling in stainless steel Doors for fluid cabinet Machine control: HEIDENHAIN TNC 640 Control interface (HMI) in German Swivel axis calibration GSC Classic Interface (software and hardware) for connection to an automation system Swivel table (A'-axis) Rotary table with GROB pallet clamping system Motor spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW GROB spindle diagnosis GSD Compact double-disc magazine HSK-A 63 with 90 tool positions Tool cleaning device Laser measurement system LaserControl LC50-DIGILOG for milling tools Pallet 400 x 400 mm, grid bores, without driver claws Production Package Premium Bdsdpfx Afew Eiw Nsqsk - Scraper belt chip conveyor, discharge height 1,100 mm - Coolant filtration system - Coolant tank - High-pressure coolant system (5-40 bar, IKZ) - Low-pressure coolant system Compressed air feed through the spindle center Oil skimmer for coolant maintenance Work area floor rinsing system Cleaning gun at the work area Rinsing device (Z axis) Three-color machine status indicator Prepared for use of an infrared signal receiver (RENISHAW) Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 3 months warranty

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Grinding length: 973 mm Bjdpfx Afowhp Dneqedk Centre height: 250 mm Workpiece table max. swivelling range: +6° / -9° Centres: Morse taper 5 (MT5) Grinding headstock max. travel: 100 mm Grinding headstock max. swivel range: +45° / -30° Max. grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Max. workpiece weight between centres: 400 kg Internal grinding attachment, max. grindable bore: 160 mm Machine weight: approx. 5,000 kg

Stanje: novo, Leto izdelave: 2025, Bandwidth: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Bsdpfx Afo Ea U Hoqsdk Available with mechanical control valve by default, or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Stanje: rabljeno, Leto izdelave: 2001, Dolžina struženja 470 mm Maks. premer struženja 390 mm Število vrtljajev vretena 3500 obr/min Pomiki X/Z – 235/520 mm Število postaj v revolverju 12 kos Krmiljenje: MSG 500 Bjdjxdfi Nepfx Afqjdk Oprema: Različni nosilci orodij

Stanje: novo, Leto izdelave: 2025, Cutting speed: 35 m/s Grinding height: 210 mm Workpiece length: / mm Machine weight: approx. 210–260 kg Space requirement: approx. 1100 x 760 x 860 mm The G115 surface grinder is a compact grinding machine designed for machining the outer circumference or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or profiled grinding wheels, inclined or contoured surfaces can also be machined. This machine is ideally suited for small businesses, maintenance workshops, home workshops, laboratories, training demonstrations, etc. Bsdovuuvkopfx Afqsdk TECHNICAL DATA Maximum stock removal: not more than 0.03 mm Maximum peripheral speed of grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm Table T-slot: 1-12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical handwheel feed interval: 0.025 mm Lateral handwheel feed interval: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forward/backward and left/right. The grinding head can be raised and lowered vertically. The entire machine is built with high rigidity. The grinding head runs smoothly. Compact design and low noise emission. The work enclosure is available separately. The machine is lubricated using a manual oil pump. To lubricate, simply pull out the handle. If you need other special accessories to increase work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: The radial run-out of the taper bore axis at a distance of 100 mm from the proximal end of the main spindle is 0.01~0.02 mm.