Žaga za perle za dvojno zasteklitev

omga TRF 527

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Kjdpfx Ahjxnlgcsvond Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: novo, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW Speed: 2,800 rpm Compressed air connection: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10,645 x 1,000 x 1,300 mm SALVAMAC COMBO 500 – the semi-automatic crosscut saw with SALVASTOP 100 - electronic length stop/pusher ----- Item 1: Legend 500 Under-table Crosscut Saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, h max. 100 mm. The structure is built entirely from thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for mounting holes. Two-hand safety control for cutting, ergonomically positioned. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum balance and durability system. Shock-absorbing system. Independent pneumatic adjustment options to suit different types of processing. Kodpfx Ajvu Hd Tjhvjnd Durable and easy-to-replace saw blade positioning bar. HM carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electropneumatic control. Clamping movement system using innovative double dust-protected ball bearings and automatic lubrication system. CE-compliant electrical system. CE versions must be standard equipped with infeed and outfeed support tables at least 1 meter long. Technical data: ----- Max. saw cross-section mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade speed: 2,800 rpm Air consumption per cycle: 7 Nl Extraction connection: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Table height: 900 mm ± 20 mm Color: RAL 7035 - RAL 1007 Item 2: Salvastop 100 electronic length stop ----- - Working modes: 2 modes 1 x Stop (length stop moves to set length) 1 x Pusher (sequential processing of multiple lengths at the press of a button) - With servo drive - Pusher speed: up to 60 m/min - Pusher length: 600 mm - With 7'' touch display - Maximum workpiece weight for pushing: up to 100 kg - USB port COMBO_500 - 6400/7000 - Roller conveyor with guide, right side of the saw. Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, roller spacing 250 mm, width 320 mm, 3 m long. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demo machine additionally equipped with: UP & DOWN FRONT GUARD Movable, not fixed, front guard. The guard lifts during cutting to ensure safe working conditions. Loading and unloading wood is simplified by the lowered guard. The system features a specially secured pneumatic linear guide system using top-quality cutting-edge technology. SOFTWARE INTEGRATION FILES Preparation f...

Stanje: rabljeno, Leto izdelave: 2002, DVOKOTNA ŽAGA (ŽAGA ZA STEKLENE LETVICE) OMGA TRF 527 NC z zvezdastim prislonom Letnik 2002 Min. in maks. razdalja med agregati: 158 mm, 2800 mm Kapaciteta reza pri 90°: 55 mm Knedpfexwumqsx Ahvjd Kapaciteta reza pri 45°: 40 mm Maks. višina reza: 40 mm Moč motorja: 2 x 1,18 kW Premer odprtine žaginega lista: 30 mm Premer žaginega lista: 220 mm Hitrost vretena: 5000 obr/min

Leto izdelave: 2005, Stanje: dober (rabljeno), I am selling a double mitre saw OMGA TRF 527, year of manufacture 2005. Cutting length: 390 - 2800 mm Maximum cutting width: 170 mm Maximum cutting height: 90 mm Swivel heads: 0° / ±45° 2 horizontal and 2 vertical pneumatic material clamps 2 motors x 1.62 kW (2.2 HP) Kedpfx Aog Tumcshvond Good condition. Available immediately.

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Knjdpfjizkhvjx Ahved Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: rabljeno, Leto izdelave: 2017, Number of motors: 2 x 1.2 kW each Working length: 2800 mm Control system: yes OMGA Double Glazing Bead Saw Model TRF 527 NC CE ----- For sale on behalf of a customer, ex-site. The machine was in operation until recently, now located at the customer's warehouse. Technical Manufacturer Description: Double mitre saw for simultaneous cutting of two glazing beads. The right saw unit is fixed, adjustment of the left unit is via positioning control. Positioning control features: - Monochrome graphic display 240 x 64 dpi - Display of 30 characters on 8 lines - Keyboard with 28 function keys - FN key for function interruption - Diagnostics and error messages - Language selection: Italian, German, English, Spanish, French, and Slovene - 10,000 memory lines dividable into 999 cycles, max. 99 lines per cycle - RS 232 interface - Manual input of dimensions or via USB interface - 3 correction values each for left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with recirculating ball bushings and runs on hardened steel shafts. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate loading and unloading of the machine. Machine equipment: Kedpfoxmamnjx Ahvsnd - Fixed right saw unit - Swivelling clamping device - Positioning control for TRF 527 NC CE - Maintenance unit - Central support - Carbide-tipped saw blades Ø 220 mm - Two-hand operation - Intermediate support for simultaneous cutting of 2 glazing beads - Pneumatic stroke of the saw units - Motor protection switch - Pressure monitor - Undervoltage release - Overload switch - Tool kit - 2 pcs. angle impact stops with 4 positions Technical data: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight: 217 kg ----- Price of the above machine on request! ----- (Technical data according to manufacturer – no liability) All prices quoted are net plus statutory VAT.

Stanje: novo, Dvostruka pilna testera posebno je dizajnirana za precizno rezanje zaptivnih letvica (glazing beads) na zadatu dužinu, bilo sa ravnim ili kosa rezovima. Mašina ima dva radna nivoa, jedan iznad drugog, što omogućava istovremeno rezanje dve letvice. Oba komada letvice sigurno se drže tokom procesa rezanja pomoću prednjih pneumatskih stega. Podešavanje željene dužine vrši se ručnim točkom koji pomera levu glavu u odnosu na fiksnu desnu glavu, a dužina se lako očitava sa mehaničkog digitalnog displeja. Min/Max. dužina rezanja: 150 mm - 2400 mm Max. dimenzija preseka pri 90°: 55 x 100 mm Knodpedy Hqvofx Ahvsd Max. dimenzija preseka pri 45°: 40 x 100 mm 2 x testera prečnika 220 mm x 30 mm otvor Motor: 1,6 KS, trofazni Zadovoljava CE zahteve bezbednosti

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Dual-shaft multiblade saw mod. SQUALO 420 2x75kW – Refurbished to as-new condition with warranty – €65,000.00 Year: 2018 Technical data: Infeed roller width: 420 mm Outfeed roller width: 520 mm Maximum saw group width: 400 mm Maximum cutting height: 200 mm Minimum working length: 800 mm Maximum passage width: 700 mm Saw spindle diameter: 60 mm Maximum circular saw blade diameter: 370 mm Knsdpshrdxijfx Ahvjd Saw blade bore diameter: 80 mm Saw spindle speed: 3,800 rpm Feed speed with rollers: 4–36 m/min Weight: 5,500 – 6,000 kg Dimensions: 2,500 x 2,260 x 2,000 mm (H)

Stanje: novo, Oprema: osvetlitev, Take your painting process to a new level – with mobile convenience. Mobile spray booths in container design for painting and coating various objects. They are specially designed for mobility, making them easy to transport and set up at different job sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system that prevents the escape of paint mist. The ventilation system ensures that the vapors and particles released during painting are contained within the booth, posing no danger to the surrounding environment. Kodpfx Aheun Shgovond Mobile spray booths are a practical and flexible solution for companies that require a relocatable and efficient painting system, which can be transported from one site to another as needed. Overview of Design and Features Our mobile 20-foot Sapi spray containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The flooring is made from checker plate. Both door wings feature ventilation grilles equipped with fine-pore filter mats. For safety, one door wing is designed as an escape door and fitted with a viewing window. Notably, these are not simply converted shipping containers! We manufacture all our containers from scratch, using only the most durable materials that meet requirements and have been tested and proven to comply with safety standards. Standard shipping containers would not meet the necessary safety standards. Paint Mist Extraction System in the Mobile Spray Container The paint mist extraction wall is mounted in front of the rear wall for the separation of overspray, and is fitted with multi-layer filter mats. The extraction wall consists of a galvanized housing, bent with baffle plates, including various suspension and mounting elements for filter installation. On the container’s exterior, at the rear wall, a powerful and explosion-proof extraction fan with a drive motor is installed on a console. Next-generation Mobile Spray Booths: Meeting EU Requirements and Advancing Coating Solutions The new generation of mobile spray booths must comply with the highest EU requirements. The consideration of new coating systems such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints poses significant demands on conventional spray booths. That’s why we have developed a new and unique mobile spray booth for the next generation of coating solutions. An important criterion is the transport of the workpieces for painting and further processing steps. Need more information? Our engineers can provide expert advice and support. Whether you require dry paint mist separation or wet scrubbing, air humidification or air drying, condensation drying at low temperatures or hot air drying—whether pre-treating workpieces by high-pressure washing with a water recirculation system, compressed air blasting, or centrifugal wheel blasting technology.

Stanje: rabljeno, Leto izdelave: 2014, Number of spindles: 5 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine will be cleaned and fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles electronically adjustable for width and height Detailed description: ----- Technical specifications: Working width: 20–230 mm Working height: 10–120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 125–145 mm Tool circle rabbet cutter: 130–160 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for radial adjustment 2nd spindle – right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. tool diameter behind fence: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle – left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. tool diameter for straight knife heads: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC controlled Segmented pressure shoe in front of upper tool holder, adjustable to tool circle and can be swung away from the tool, spring-loaded. Pressure shoe before and discharge after the top spindle with electronic digital displays, integrated into the memory function or PowerCom. Knjdpfxewzmu Rs Ahvod 5th spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5–30 m/min Infeed roller in front of 1st lower cutter pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment path of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380-420 V), 50 Hz All spindles in IE2 design Electrical equipment according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations not considered.