Miza za izdelavo oken

Omga BA825 (+A+U)

Stanje: novo, Tip 1000-2S Delovna širina: 1000 mm Minimalna delovna dolžina: 400 mm Delovna debelina: 2–80 mm Hitrost brusilnega valja: frekvenčno regulirana Iodpfxjm Dr Rns Agpja Hitrost podajanja: 5–20 m/min Skupna moč motorja: 4,12 kW Transportne dimenzije: 1700 x 1600 x 1400 mm Teža: 800 kg Cena: 4.130 EUR (EXW Jonava, Litva)

Stanje: novo, Leto izdelave: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Isdpfjmftk Ajx Agpoa Units: 2 brush stations centrally adjustable, each with individual fine adjustment Diagonal brush technology: Yes, continuously adjustable from -7° to +7° 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 – 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: 1.5 m Machine width: 1.5 m Weight: 700 kg

Stanje: novo, Sheet thickness: 2.5 mm Roll diameter: 98 mm Throat depth: 160 mm Total power requirement: 1.5 kW Machine weight: approx. 0.35 t Ijdpfx Agjfv H Ehopja Space required: approx. 550x1400x1500 mm Supplied with: • Manual version • 4 sets of rolls • Foot pedal control • Brake motor • Emergency stop

Leto izdelave: 2024, Stanje: novo, The world’s flattest timber frame assembly table = only 3 cm! Supplied without wooden panels. Iodpfxob Nrbne Agpoa Supplied components: - 1 double guide rail (zero stop) - 10 perforated rails - 10 rack clamps - 14 adjustable stop blocks - 14 exchangeable exterior wall pressure plates - Cordless impact wrench - Bit adapter - 50 dowels MMS 10x70/5 - Hammer drill bit 8x165 Dimensions: Clamping length from 0 to 3,550 mm Hole grid 140 mm With a panel width of 1,250 mm = Table length 12,350 mm Max. clamping force approx. 250 kg Clamp stroke length 340 mm Stop block height 100/160 mm This frame assembly aid was developed to enable precise production of timber frame elements. Particular attention was paid to space requirements and price. Due to its extremely flat design, the surface can be used for other purposes by removing the clamps and stops. This is a considerable advantage not only for small operations, but for businesses of any size. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick wooden panel supplied by the customer. The same panel can be used to install approach ramps at the edges. The level thus created can be driven on by heavy vehicles or used as storage space. This means that the area can be activated for timber frame assembly only when needed. All steel parts are galvanised. Complete installation is carried out on site by the customer. After adjusting the table, the stops must be pinned, as they could otherwise be moved by the force of the clamps. Packaged in wooden crates, ready for EU shipping. Delivered free to addresses within Germany. Made in Germany. For technical data, see specification sheet.

Stanje: novo, Leto izdelave: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable Ijdpfx Agoi Hpk Uepea 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: novo, Leto izdelave: 2024, Mitre saw with a saw blade diameter of 600mm (optionally 800mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are continuously adjustable) Iodped Rhziofx Agpsa - Two-hand safety control Optional available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Version as fully automatic saw - Pre-loading magazine - Horizontal clamping device - Extraction system - Additional accessories on request We will be happy to provide you with a customised offer tailored to your requirements. The machine can be inspected and tested at 56812.

Stanje: dober (rabljeno), največja višina reza: 200 mm, širina verige: 400 mm, vhodna napetost: 380 V, vrsta nastavitve višine: električni, največja hitrost vrtenja: 3.400 obr/min, moč: 37 kW (50,31 KM), Največja delovna višina: 200 mm Širina verige: 400 mm Največja razdalja med zunanjimi rezili: 380 mm Premer rezil (min/maks): 250 / 350 mm Isdpstvpfmefx Agpea Nastavljiva hitrost podajanja (inverter): 5 – 30 m/min Minimalna dolžina obdelovanca: 1000 mm Premer nosilca rezila: 70 mm Hitrost vrtenja nosilca rezila: 3.400 obr/min Moč motorjev: 2 x 37 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj Ijdpomgc I Nefx Agpja - dvigovalno vreteno št. 1 - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Stanje: novo, Leto izdelave: 2025, Schiatti Angelo BFP12 double-sided straight-line grinding machine with arris Isdpfswd Hbiox Agpja Max. working width: 1,300 - 4,500 mm Flexible machine configuration: 5 / 6 / 8 / 9 / 10 / 11 spindles - Glass thickness: 3–35 mm - Minimum working width: 160 mm - Max. loading weight: 480 kg - Automatic thickness adjustment via PLC control - Collection tray for process water - Including transfer stations

Stanje: rabljeno, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic alignment stops for length positioning • CNC control with operator guidance via monitor • Integrated cutting plan display • 2 special cutting heads for laminated safety glass (LSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply for upper and lower cutting heads • Including fill level monitoring for the cutting oil canister • Automatic breaking bar for opening the lower cut • Lowerable outfeed table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glass • Continuous special infrared heater, swivelling from below Iedpfxew Uptze Agpja • Thermal-mechanical separation device for separating multiple interlayers • Marking of the cutting line for diagonal cuts via visible laser • Glass flow direction: right to left • Max. cutting length for LSG: 3700 mm • Max. glass size: 6100 mm x 3210 mm • Glass thickness LSG: 2x3 to 2x8 mm • Foil thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: ± 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Rotating device on operator side • Price on request