Obdelovalni center, rezkalni stroj x1000

Niigata U-1000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, delovna širina: 215 mm, varilna moč (maks.): 750 kVA, Kompletna tovarna za varjenje armaturnih mrež/izdelavo rešetkastih nosilcev Tovarna obsega: Cgsdeqy Ek Ajpfx Ahxot - Linija za varjenje mrež SCHLATTER PG 24, polavtomatska, leto 2002 - Linija za izdelavo rešetkastih nosilcev SMEI, popolnoma avtomatska, leto 2003 - Stroji za ravnanje in rezanje 1x Wafios R4 2x VITARI NR16 1x VITARI NR10 - Linija za hladno vlečenje SMEI, vhodna žica max. 10 mm, hitrost - 4 m/s - Stroj za zvarjanje (butt welding) SMEI - Novi stroj za ostrenje žice SMEI

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Cgjdsu Sbkgopfx Ahxot Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg Cjdpferqwbiox Ahxegt • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Cedpenzpx Rsfx Ahxegt

Stanje: rabljeno, Manufacturer: CINCINNATI Codpjwrpyksfx Ahxegt

Stanje: rabljeno, Tehnični podatki: Pomik v osi X: 700 mm Cjdoxtnn Tepfx Ahxjgt Število vrtljajev: do 1500 min⁻¹ Pomik: 12 - 1000 mm/min Velikost mize: 1100 x 250 mm Nagibna glava: da Dimenzije pribl.: 1750 x 1600 x 1850 mm Teža pribl.: 1900 kg

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružniška klop, stružnica z vodilno in pogonsko vreteno, stružnica z vodilno in pogonsko vreteno -Proizvajalec: Strunguri Arad, stružnica z vodilno in pogonsko vreteno tip SNA560x2000 Cgodpsyaypkofx Ahxst -Dolžina struženja: 2140 mm -Premer struženja nad posteljo: 600 mm -Premer struženja nad suportom: 330 mm -Vrtina vretena: Ø 65 mm -Število vrtljajev vretena: 16 - 1600 o/min -Tro-čeljustna glava: Ø 310 mm -Ležišče konjička: MK5 -Pogonski motor: 11 kW -Dodatki: vključeni, glej fotografije -Dimenzije: 3700/1050/H1400 mm -Teža: 3600 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 163341, Country of manufacture: UK Voltage: 400V 3-phase AC, 50/60 Hz, max 58A Dimensions: 200 x 260 x 250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capabilities Table dimensions: length 900 mm / depth 410 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed range: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power rating: 7.5 kW Feed Rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900 x 410 mm T-slot size (ISO R299): 18 mm / number: 3 / spacing: 125 mm Permissible load: 500 kg Floor to table surface height: 780 mm Codpow T Tp Refx Ahxsgt ATC Tool Magazine Number of tool positions: 30 Tool selection: free station number choice; automatic bi-directional search Tool shank: MAS BT-40 Max tool diameter in magazine: Ø 80 mm (Ø 125 mm without adjacent tools) Max tool weight: 8 kg Max total tool magazine load: 120 kg Max tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Reservoirs Lubricating oil tank: 1.8 L Feed lubrication tank: 260 cm³ Spindle cooler tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed Air Pressure: 0.5 to 0.9 bar Flow rate: 200 L/min All technical information provided subject to errors and omissions.

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Axial table travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator Cedpfx Ast Hww Dshxegt - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice

Leto izdelave: 1955, stanje: rabljeno, Radial drilling machine, drilling machine, arm drilling machine - Arm reach: 2055 mm - Max. distance from machine table to spindle mount: 1700 mm - Taper mounting: MK5 - Motor power: 7.5 kW - Spindle speeds: 11.2–1400 rpm - Column diameter: Ø 450 mm - Spindle stroke: 540 mm Cgjdpfx Asd Enr Ishxst - Thread cutting device - Automatic feed: 0.037–2.0 mm/rev - Clamping surface: 920 x 1600 mm - Dimensions: 2580/1110/H3450 mm - Weight: 6465 kg