Peč z recirkulacijo zraka/komorna peč 260°C

Nabertherm Lacktrockner 260°C KTR 8000 LS nach DIN 1539

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Charmilles Millenium control system Travel (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1450 x 900 x 510 mm Max. workpiece weight: 3000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg capacity (K250) Overall system dimensions: 2670 x 2870 x 2645 mm Gbedeuuz Iiepfx Afqog Total weight of system: 6300 kg The machine will be cleaned, fully overhauled, and tested for all functions upon receipt of order. Options: - Commissioning of the machine at your facility - On-site training - Cooling unit - Transport - Clamping bar set

Stanje: novo, Leto izdelave: 2024, pritisk: 8 letvica, Horizontal mitre adjustment 15°–90°15°, stepless Saw motor 5.50 kW (400 Volt) Saw blade Ø 600 mm Travel range rear stop 180 mm Working height 940–1000 mm, adjustable via feet 2 x extraction ports (top of hood and bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Rotary table made from ground nickel steel Saw head with recirculating ball guides, designed for high accuracy, long service life, and high rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed Chip flow directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment 0º/45º/90º/-45º/-60º, stepless • Incl. 2 pneumatic vertical clamps • Infinitely variable saw blade feed rate • Two-hand safety control • Adjustable rear material stop • Chip extraction device – chip extraction system • Mist spray unit for air-oil cooling • Air pistol with spiral hose Gjdpfxsgwt S To Afqjbg • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade Ø 600 mm • Saw blade not included in delivery! Our NC pusher system ensures your workpieces are positioned at the desired working position on our UK 600 HA 90°. A gripper clamp secures the material, and the NC control automatically positions it. Afterwards, the clamping and sawing process is activated. Positions are pre-programmed in the control system. Once the machining operation is completed by the machine, it automatically moves to the next sawing position. Depending on the workpiece, multiple parts can also be clamped and positioned simultaneously, stacked or side by side. You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH

Stanje: novo, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiussverschil ----- 50/230 Buigsnelheid/herhaalnauwkeurigheid ----- 230º/s. ±0,05° Doo rstanglengte ----- 1.000–∞ Gewicht ----- 5.000 kg Machineafmetingen ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1.800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten voldoen aan VDMA-, ISO- en DIN-normen OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasonderzoek en buispositionering elektomagnetische of optische detectie Gbsdpfxjga T E Ae Afqjg * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Stanje: novo, Leto izdelave: 2024, Tünel tipi parça yıkama makinesi; metal ve plastik parçalar için tasarlanmıştır. Otomotiv, gıda, metal işleme, sac, plastik kasa gibi farklı sektörlerde kullanılmaktadır. Çalışma Prensipleri İş parçası, bantlı konveyör aracılığıyla tünelin içerisine girer; konumlandırılmış nozullar, iş parçasının her bölümünü yıkar. İş parçası tünelden geçerken, basınçlı ve ısıtılmış su + kimyasal karışımı ile yıkanır. Bu yıkama işlemi sırasında yüzeydeki tüm yağ, talaş ve diğer endüstriyel kirleticiler temizlenir. Tünel yıkama makineleri, INTERSONİK mühendislik departmanı tarafından hem standart hem de uygulamaya özel olarak tasarlanır. Gbodod I Azvopfx Afqeg Yıkama İşlem Akışı Yıkama, pasivasyon ve kurutma, Intersonik Proses Mühendisleri tarafından istenilen sonuçlara göre, çevre dostu Intersonik kimyasalları destekli olarak özel olarak tasarlanır. Çalışma Süreci ► Ön yıkama ► Ana yıkama ► Durulama ► Pasivasyon ► Kurutma Uygulama Alanları ► Otomotiv endüstrisi ► Askeri savunma sanayi ► Gıda sektörü ► Seri üretim ve bakım amaçlı tüm imalat endüstrisi ► Metal mobilya endüstrisi Konveyör, ihtiyaçlarınıza ve iş parçasına göre INTERSONİK tarafından özel olarak tasarlanıp imal edilir. Konveyör hızı ayarlanabilir. Otomatik sıvı dolumu standarttır. Elektrikli ısıtma standarttır; ısı eşanjörü ve brülörlü ısıtma seçenekleri mevcuttur. Tüm veriler dijital ekranlar aracılığıyla görülebilir ve kontrol edilebilir. PLC kontrolü opsiyoneldir. Tüm sıvı tankları, ısı kaybını önlemek için izole edilmiştir. Buhar toplama vakum pompası ve ünitesi standarttır. Diğer opsiyonlar ve detaylar için lütfen bizimle iletişime geçin. tünel yıkama, otomatik yıkama, otomotiv parça yıkama, metal yıkama, parça yıkama makinesi, yağ alma, sprey yıkama, basınçlı yıkama makinesi

Stanje: rabljeno, Plate width: 2510 mm Plate depth: 5135 mm Plate height: 345 mm Weight: approx. 10 t Space requirement: approx. 2.5 x 5.1 x 0.38 m T-slot dimensions: 28 x 45 mm – Height: 48 mm Gbedpfshpvavsx Afqeg Number of T-slots: 9 Slot spacing: 220 mm Edge distance: 240 mm Slot size: 28 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, nosilnost: 180 kg, doseg roke: 2.900 mm, We at Binici MB GmbH have additional industrial robots available in-house. All of our robots are fully operational and come with complete accessories. We are happy to provide you with expert advice. Gbjdpfx Afowxxzwoqjg

Leto izdelave: 2012, Stanje: dober (rabljeno), številka stroja/vozila: ENOG, DEMAG KBK Crane Suspension System / Crane Runway Approx. 8x4 m Load Capacity / Lifting Capacity: 250 KG - 0.25 t Technical Data of the System: Crane runway made of Demag KBK1 + KBK2 rails Gbodpfxomqf Nfo Afqjg System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, mounting brackets/hangers, etc. Including Demag DC-COM 250 KG electric chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are kept in stock! Other KBK systems also available. Load capacity ranges from 125 KG to 1600 KG. Please inquire with your required crane runway length, overhang, and dimensions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. Gjdpfx Afol Dw D Ejqobg With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk. Godpfx Afsfzktzsqebg

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Consisting of: 1. Infeed conveyor, length 3,050 mm Gbodpfxou Afu Rs Afqeg 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request