Prikolica

Multi-Trans VAL 30

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 4.000 mm, skupna širina: 2.500 mm, skupna višina: 665 mm, barva: modra, Operating conditions: The trailer is designed for use on level, paved roads in internal transport operations. The trailer components are not designed for multiple-trailer combinations. Payload: 10 t at 6 km/h with uniform loading (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Kdedpjxrtqwjfx Abxsn Main frame: Robust welded construction made of structural steel profiles. Steering: Four-wheel Ackermann steering, drawbar can be raised, removed, and repositioned from front to back. Coupling height at the towing vehicle approx. 350 – 600 mm (other coupling heights permitted only upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar safety catch as per accident prevention regulations (UVV). Chassis: Both axles steered, super-elastic tyres 21×8-9 approx. 517×186 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue

Stanje: novo, Load capacity: 40,000 kg Length: 8,000 mm Width: 3,000 mm Height: 900 mm Rear axle: steerable Front axle: steerable Tire dimensions: 540 / 300 twin tires, mm Dimensions (L x W x H): 9.9 x 3.0 x 0.9 m Heavy-duty trailer featuring: - Double steering system - Small turning radius - Anti-tip due to steering lock limitation - Very robust, resulting in low maintenance Kdedofrzwfopfx Abxjn - Removable tow bar - Impregnated wooden platform - Standard paint finish may vary. Available in your desired RAL color on request. Photos shown are of a 30t version. Looking for different load capacities or dimensions? Please contact us.

Stanje: zelo dobro (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.400 mm, skupna višina: 670 mm, OPTIONAL ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on level, paved surfaces for in-plant transport. Multiple Trailer Operation: The trailer components are not designed (without a towing hitch) for operation in convoy with multiple trailers. Payload: 16 t at 6 km/h with uniform load distribution (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Kdsdoxrtdqjpfx Abxsn Loading Area: Dimensions approx. 6000 x 2400 mm, loading height approx. 670 mm, loading platform covered with softwood planks, all-round edge protection Steering: Four-wheel stub axle steering, drawbar tiltable, removable, and reversible from front to back; coupling height on the towing vehicle approx. 320 mm (other coupling heights only upon notification); towing eye per DIN 74054, diameter 40 mm; drawbar drop protection compliant with accident prevention regulations (UVV) Chassis: Both axles steered, solid rubber tires approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication Paintwork: Top coat RAL 5002 ultramarine blue Optional Equipment: - 2 tie rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Stanje: zelo dobro (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.400 mm, skupna višina: 750 mm, barva: modra, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in in-plant transport. Towing combinations: The trailer components are not (without a tow hitch) designed for combined use with multiple trailers. Payload: The industrial trailer is capable of transporting loads up to a maximum of 25 t at 6 km/h, assuming a uniform loading (surface load) of the platform between the axles. Point or linear loads are only permitted upon notification. Kdsdpoxrtb Nefx Abxen Main frame: The main frame of the industrial trailer is a robust welded construction made of structural steel sections. Loading platform: Dimensions are approx. 6000 x 2400 mm. The loading height is approx. 750 mm. The platform is covered with softwood planks and enclosed by a continuous edge protection. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and switched from front to rear; hitch height on towing vehicle approx. 285 – 775 mm (other hitch heights only permitted upon notification); towing eye according to DIN 74054, Ø 40 mm; drawbar fall protection according to accident prevention regulations (UVV) Chassis: Both axles are steered. Solid rubber tires approx. 559 x 356 mm; wheel hubs with tapered roller bearings and lifetime grease lubrication Paintwork: Finished in RAL 5002 Ultramarine Blue Additional equipment: On each longitudinal side, two lashing bars made of round steel are welded vertically into the outer beams. Available for rent or sale EU-wide.

Stanje: novo, Leto izdelave: 2025, nosilnost: 20.000 kg, 20-ton container rotator, turning rolls, complete set 380 V, infinitely variable speed adjustable from 200 to 1000 mm/min. Ksdpeifgu Uefx Abxsdn Suitable for diameters from 500 mm to 4000 mm Roller diameter: 300 mm x 140 mm Support rollers temperature resistance: 100°C Dual synchronized drive AC motor, 380 V, 750 W With hand and foot remote control, complete set

Stanje: zelo dobro (rabljeno), skupna dolžina: 4.100 mm, skupna širina: 2.100 mm, skupna višina: 560 mm, barva: modra, ALSO AVAILABLE OPTIONALLY WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in in-plant transport. Payload: 6 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are only permissible upon prior notification. Base Frame: Robust welded construction made from sectional steel profiles. Loading Platform: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, with phenolic resin-coated plywood panels Anti-collision bumpers on the front frame ends Steering: Four-wheel knuckle steering, towing drawbar can be raised, non-reversible and non-removable, Drawbar drop lock in accordance with accident prevention regulations (UVV) Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with conical roller bearings and permanent grease lubrication Paint Finish: Top coat RAL 5002 Ultramarine Blue Other Features: - Impact protection on the front frame ends made from drop-shaped half-shells. Kdjdoxrtgfopfx Abxon - All-round anti-slip edge approx. 25 mm high - Side underrun protection at the height of the diagonal brace - Pin coupling with captive, spring-secured bolts (diameter 30 mm) at the rear - Double-acting wheel chock with chain - Two reflectors at the rear - Prepared for roof structure

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Rollers: steel/rubber • High stability due to robust construction • CE certificate Kdsdpfjf Ep Disx Abxen • Excellent price-performance ratio • Cable remote control • Dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: novo, Load capacity: 5.0 t Kdsdpfxjgvwgcs Abxon Workpiece diameter: 100 – 2500 mm Total power requirement: 2 x 0.37 kW Max. payload drive unit: 2500 kg Max. payload idler unit: 2500 kg Table rotation speed: 100 – 1000 mm/min Wheel diameter: 250 x 140 mm Machine weight: approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired)

Stanje: zelo dobro (rabljeno), Welding positioner Focker Strähler 8 tons - Load capacity: 8,000 kg - Equipped with hand and foot remote control Kdedpfxsf Ezdno Abxsn - Infinitely variable speed and tilt adjustment - Rotation speed: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted to center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm - Condition: visually and technically impeccable, runs very quietly

Stanje: novo, Pressure 500 t Column clearance 600 mm Stroke 600 mm Table surface 3500 x 1500 mm Distance cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on the bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely machined with a CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet per EN standards - All cables are labeled and neatly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EU safety standards 2006/42/EC Machinery Directive, EN ISO 16092-1 and 16092-3 - Two-hand operation - Emergency stop button Kdodpfx Abjfv Awhexjn - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION - Price includes transport costs, installation, and training at the customer's facility. - Hydraulic oil is not included in the price. - All handling costs (e.g. crane, forklift, etc.) are to be borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer's warranty. - This warranty includes delivery of all spare parts required for repair and a service visit for the machine. Damaged parts will be returned to the manufacturer after being replaced with a new part. - This warranty does not cover parts damaged due to improper use.