Industrijski priklopnik VAL30 – 10 ton

Multi-Trans VAL30

Stanje: zelo dobro (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.400 mm, skupna višina: 670 mm, OPTIONAL ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on level, paved surfaces for in-plant transport. Multiple Trailer Operation: The trailer components are not designed (without a towing hitch) for operation in convoy with multiple trailers. Nledpfjxrtdqsx Aliod Payload: 16 t at 6 km/h with uniform load distribution (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Loading Area: Dimensions approx. 6000 x 2400 mm, loading height approx. 670 mm, loading platform covered with softwood planks, all-round edge protection Steering: Four-wheel stub axle steering, drawbar tiltable, removable, and reversible from front to back; coupling height on the towing vehicle approx. 320 mm (other coupling heights only upon notification); towing eye per DIN 74054, diameter 40 mm; drawbar drop protection compliant with accident prevention regulations (UVV) Chassis: Both axles steered, solid rubber tires approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication Paintwork: Top coat RAL 5002 ultramarine blue Optional Equipment: - 2 tie rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Stanje: dober (rabljeno), Leto izdelave: 2017, dolžina transportnega traku: 7.100 mm, širina transportnega traku: 2.500 mm, Length: 7100 mm Width: 2500 mm Nodpfx Ajwq N Sdjlisld Height: 900 mm

Stanje: zelo dobro (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.400 mm, skupna višina: 750 mm, barva: modra, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in in-plant transport. Towing combinations: The trailer components are not (without a tow hitch) designed for combined use with multiple trailers. Payload: The industrial trailer is capable of transporting loads up to a maximum of 25 t at 6 km/h, assuming a uniform loading (surface load) of the platform between the axles. Point or linear loads are only permitted upon notification. Main frame: The main frame of the industrial trailer is a robust welded construction made of structural steel sections. Loading platform: Dimensions are approx. 6000 x 2400 mm. The loading height is approx. 750 mm. The platform is covered with softwood planks and enclosed by a continuous edge protection. Nsdpfexrtb Nox Alijld Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and switched from front to rear; hitch height on towing vehicle approx. 285 – 775 mm (other hitch heights only permitted upon notification); towing eye according to DIN 74054, Ø 40 mm; drawbar fall protection according to accident prevention regulations (UVV) Chassis: Both axles are steered. Solid rubber tires approx. 559 x 356 mm; wheel hubs with tapered roller bearings and lifetime grease lubrication Paintwork: Finished in RAL 5002 Ultramarine Blue Additional equipment: On each longitudinal side, two lashing bars made of round steel are welded vertically into the outer beams. Available for rent or sale EU-wide.

Stanje: zelo dobro (rabljeno), skupna dolžina: 4.100 mm, skupna širina: 2.100 mm, skupna višina: 560 mm, barva: modra, ALSO AVAILABLE OPTIONALLY WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in in-plant transport. Payload: 6 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are only permissible upon prior notification. Base Frame: Robust welded construction made from sectional steel profiles. Loading Platform: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, with phenolic resin-coated plywood panels Anti-collision bumpers on the front frame ends Steering: Four-wheel knuckle steering, towing drawbar can be raised, non-reversible and non-removable, Drawbar drop lock in accordance with accident prevention regulations (UVV) Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with conical roller bearings and permanent grease lubrication Nedpfexrtgfsx Alijld Paint Finish: Top coat RAL 5002 Ultramarine Blue Other Features: - Impact protection on the front frame ends made from drop-shaped half-shells. - All-round anti-slip edge approx. 25 mm high - Side underrun protection at the height of the diagonal brace - Pin coupling with captive, spring-secured bolts (diameter 30 mm) at the rear - Double-acting wheel chock with chain - Two reflectors at the rear - Prepared for roof structure

Stanje: novo, Leto izdelave: 2026, The KDP220TOP sandblaster is a top-quality product, designed to deliver long-lasting and reliable performance. It enables users to quickly and effectively clean the surfaces of various components. Equipped with an overhead opening supported by telescopic cylinders, it significantly improves workplace ergonomics and facilitates loading of heavy elements. The 220-liter tank capacity allows for efficient cleaning of larger surfaces in a short time. Advantages of our sandblaster model: - Fully equipped and ready for immediate use - Convenient blasting gun with 4 interchangeable ceramic nozzles - Large, stable front doors with a rubber circumferential seal to ensure safe and dust-free operation - Telescopic cylinders for increased operator comfort - High-quality integrated rubber gloves - Vent connection - Efficient lighting of the work area - 4 pieces of replaceable protective foils for the viewing window - Sandblasting hose positioned at the bottom of the collection container - Compatible with various abrasives - Drain opening for quick change of blasting media - Ease of operation, reliability, and operator safety Technical specifications: KDP220TOP technical data: AIR CONSUMPTION: 400-700 L/min MAXIMUM PRESSURE: 8 BAR AIR CONNECTION: quick coupling 1/4" ABRASIVE TANK CAPACITY: +/- 18 kg EXTRACTION (VENT) CONNECTION: 63 mm Nsdpfx Alsvzqf Ujijld VIEWING WINDOW AREA: 540 x 250 mm FRONT HEIGHT: 370 mm INTERNAL CABINET DIMENSIONS (LxWxHmin-max): 840 x 550 x 370-550 mm EXTERNAL CABINET DIMENSIONS (LxWxHmin-max): 890 x 560 x 1118-1380 mm WEIGHT: 49 kg DC23 technical data: MODEL: DC23 VOLTAGE: 220V POWER: 1200W VACUUM: >12 Kpa INLET DIAMETER: 45 mm CAPACITY: ~16 l Standard equipment: - Work area lighting – 12 V fluorescent lamp powered by 230 V with switch - 2 high-quality integrated rubber work gloves - 2 extraction (ventilation) connections, 63 mm and 90 mm, enabling connection to an extraction unit - Blasting gun with 4 interchangeable ceramic nozzles (sizes: 4, 5, 6, 7 mm) - 4 replaceable protective films for the window/viewer - Top doors with rubber seals to ensure dust-free operation - Stable grate in the work area - Instruction manual in Polish - DC23 dust extractor - Connecting hose ~2 m - Bag filter

Stanje: dober (rabljeno), Leto izdelave: 1999, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.150 mm, Fooke Endura, tip 8. Letnik izdelave 1999, krmilni sistem Siemens 840 D Powerline, pot giba osi X/Y/Z 3000/2500/1150 mm, višina mostu 800 mm, Nedpfx Alev N Uuveijld vretenska glava 23 kW, glava za stransko rezanje, os vrtenja 365°, os nagiba +/- 100°, hitrost podajanja do 15 m/min, hitrost vrtenja vretena do 16.000 vrt/min, HSK A 63, električno ročno kolo, teža stroja 50.000 kg.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 55.771 h, laserske ure: 35.157 h, laserska moč: 3.200 W, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 150 mm, hitrost pozicioniranja: 140 m/min, natančnost pozicioniranja: 0,02 mm, leto zadnje generalne obnove: 2024, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 150 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, Laser je v obratovanju, možen ogled in preizkus. Redno servisiran, v dobrem tehničnem stanju. Vsa ogledala so bila popolnoma zamenjana leta 2024. Njdpev Hxbbjfx Alisld

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Naprodaj: 2 šotorski hali, vsaka 120 x 18 metrov, proizvajalec DallGruppen Nova cena obeh brez stranskih vrat – 2,4 milijona evrov Notranja višina cca 18 metrov Samorazstavljanje na Danskem (potreben tovornjak z dvigalom) Nljdpfey Nnuhex Alied Ni primerno za Norveško, Švedsko in Finsko zaradi snežne obremenitve cca 100 kg/m² Ogled dobrodošel Video si oglejte v oglasu Več informacij in video na zahtevo

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.150 mm, pomik osi Y: 1.850 mm, pomik po osi Z: 1.000 mm, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 24 m/min, največja hitrost vretena: 24.000 obr/min, vrtilni moment: 87 Nm, CNC Fidia C20 WORKING AREA X-axis longitudinal travel: 3,150 mm Y-axis transverse travel: 1,850 mm Z-axis vertical travel: 1,000 mm MAXIMUM AXIS SPEED X and Y axes rapid traverse: 30 m/min Z axis rapid traverse: 24 m/min WORKPIECE TABLE Clamping surface: 3,000 x 1,600 mm Maximum permissible load: 5,000 kg/m² T-slots: - 8 longitudinal H12 + 1 H8 - Width: 22 mm - Pitch: 160 mm Nljdjyw Tddepfx Aliod ELECTROSPINDLE: Maximum power (S6 60%): 55 kW Spindle speed range: 240 ÷ 24,000 rpm Constant power range: 6,000 ÷ 24,000 rpm Maximum torque: 87.5 Nm Tool holder: HSK – A63 C-axis stroke: ± 200° C-axis speed: 2,000 °/min C-axis offset from spindle axis: 75 mm A-axis stroke: +95° / -110° A-axis speed: 2,000 °/min Max. distance spindle nose – table surface: 1,175 mm Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS head calibration system • Various auxiliary equipment supplied with the machine • Operation and maintenance manual and CE declaration of conformity

Leto izdelave: 2022, obratovalne ure: 108 h, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: SN2120, EDM312MF30-SLM (second-life machine) Technical Data: Travel distances: 450x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance table/electrode holder: 150/450mm Max. workpiece weight: 800kg Max. dielectric fluid: 700l Dimensions (W x D x H): 2700x1800x2350mm Machine weight: 2500kg Power supply: 3/N/PE 400/230V 50Hz Connected load: 6.7 KVA Equipment: Color: newly painted in light grey + tele grey Nlsdpfx Aehtrdyelijd New control cabinet New APC910/2 controller (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A generator Rev.4 5-position tool changer (WZW) Contact protection operable via push button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Termogamma cooling unit Completely new machine wiring New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve terminal CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling switch Automatic lowering tank Clamping chucks: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training