Briketna stiskalnica Briketna stiskalnica za aluminij

Muetek MPP NEM 300

* Production time approx. 4-5 months

---
Our bestselling briquetting press series
Gijdpfx Aechqxxegwjp
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continual development, and expertise
+ Several hundred machines in operation with satisfied customers
+ Excellent price-performance ratio

The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.

The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material.

The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette.

Advantages of briquette production include:
• Volume reduction of up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Cost-effective disposal
• Profitable sale

--

Briquetting Press NEM 300
Throughput approx. up to 200 kg per hour (highly depending on material).

- In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion.
- In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion.

Technical specifications:

Motor: 7.5 kW (+ 0.55 kW on the cooler)
400 Volt / 50 Hz / 3-phase
Front bushing: 125 mm
Max. briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Pump: 80 liters
Storage hopper approx. 0.5 m³ capacity (extendable)

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.