Zrak Stikalo nakup rabljenega (1.855)

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 1.000 m³/h, skupna širina: 1.020 mm, skupna dolžina: 1.680 mm, skupna višina: 2.460 mm, skupna masa: 1.540 kg, obratovalni tlak: 10 letvica, vhodna napetost: 400 V, moč: 14,2 kW (19,31 KM), One (1) heat-regenerating compressed air adsorption dryer. The dryer was in operation from 2014 to 2017. The unit has been out of service since 2017. The compressed air was supplied by an oil-free Atlas Copco ZR3 compressor with 132 kW power. Manufacturer: Donaldson Filtration Deutschland GmbH Model: HRS 1000 Year of manufacture: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions (L x W x H): 1680 mm / 1020 mm / 2460 mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated alumina Desiccant middle (40 cm): 2 mm activated alumina Desiccant top (remaining to the top): silica gel beads Hfjdsr A El Eepfx Adrsh The dryer has already been dismantled and is available immediately. The desiccant was vacuumed from the vessel and sorted by type in airtight bags. The desiccant is still in a usable condition; it is not oiled or contaminated. External re-drying of the desiccant is possible. TÜV has inspected the vessels internally and an expert opinion is currently being prepared. “Loose deposits at the lower part of the dished head” (photos to follow).

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, skupna masa: 13.000 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 1.250 A, Kompletna srednje- in nizkonapetostna postaja skupaj s tremi 1000kVA 20kV transformatorji Sestavljena iz: 3x Pauwels transformator 1000kVA 20 000V 1x Alstom srednjenapetostna stikalna postaja za prihodnji obročni vod, odcep na 20kV obremenilno ločilo Alstom Odvod na merjenje, 3x varovalčni odvod za 3x transformator 1x Siemens Sikus nizkonapetostna postaja s priklopom treh transformatorjev, vključno s 3 spojnimi stikali za povezavo zbiralk Različni odvodi NH00 NH1 NH2 Za dodatna vprašanja smo na voljo po telefonu ali e-pošti. Dodatne slike in podrobnosti, tehnične tablice na zahtevo. Odlično stanje – skoraj kot novo – glejte slike. Demontažo je izvajalo elektro podjetje. Vsi bakreni povezovalni elementi in vijaki so priloženi. Notranje ožičenje za merjenje moči je bilo umaknjeno in označeno. Volumen zapolni celoten tovornjak dolžine 13,6m, približno 13.000kg skupaj s transformatorji. Prevzem možen izključno po dogovoru v 75053 Gondelsheim. Viličar za nakladanje je na voljo. Pošiljanje preko špedicije možno, prosimo pošljite povpraševanje z vašo poštno številko. Hsdpfxey Hf Umj Adrjfh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Hladilni sušilnik Proizvajalec: Kaeser Tip: TE 121 Leto izdelave: 2008 Pretok: maks. 12,7 m³/h Hsdpfxoy Sgh Es Adrjfh

Stanje: dober (rabljeno), Leto izdelave: 2011, vhodna napetost: 230 V, Kotni stiskalnik na stisnjen zrak. Rezila za sisteme Reynaers so vključena. Hfedsy Twnxopfx Adreh

Stanje: rabljeno, obratovalne ure: 638 h, Naprodaj visokotlačni kompresor za zrak / dušik – booster EFCO Maschinenbau GmbH BOE 100/200. Kompresor je rabljen, popolnoma delujoč. Trenutno je priključen – mogoč je ogled in preizkus na lokaciji. Namenjen je stiskanju zraka ali dušika do tlaka 200 bar. Primeren za tlačne preizkuse, industrijske procese, sisteme za testiranje ventilov ter druge visokotlačne aplikacije. Specifikacija: Model: EFCO BOE 100/200 Največji delovni tlak: 200 bar Kapaciteta: 2 x 50 l (100 l) Električni pogon – 400 VAC Primeren za stiskanje zraka in dušika Samodejni izklop ob doseženem maksimalnem tlaku Hjdpfjy R Nnrox Adrefh Samodejni vklop ob padcu tlaka Enostavno in udobno upravljanje Čas polnjenja od 0 do 200 bar (2900 psi) ~2,5 h Delovne ure: 638 h Nemška oprema, profesionalna, industrijski razred. Za več informacij nas kontaktirajte – z veseljem odgovorimo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 49.000 h, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 600 m³/h, pritisk: 10 letvica, obratovalni tlak: 10 letvica, vhodna napetost: 400 V, tlak (maks.): 10 letvica, nazivna moč: 55 kW (74,78 KM), Oprema: Na voljo je tipska ploščica, kompresor, Dobro delujoč frekvenčno voden vijačni kompresor Ingersoll-Rand, 55 kW, 10 m³/min pri 10 bar. Hsdoy Sv Riopfx Adrsfh

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar Hodpfx Adsvz Hhxorjfh - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm Hsdpfxevz Hq Ts Adrofh - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm Hjdpevz Hqgsfx Adrsfh - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes Hfedpfsvz Hqmjx Adreh - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg Hfodpjvz Hqtofx Adroh - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Hedpfx Adjvz Hqysrsfh Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h Hfsdpfxsvz Hq Hj Adreh - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: dober (rabljeno), Upravljalno-bremenski preklopnik, FI/LS stikalo, motorski zaščitni izklopnik, obratno stikalo -Tip: CG8 D-V226-602 FS1 -brez ročaja za preklop -Cena: na kos -Število: na voljo 22 stikal Hfsdpfx Adeb A I Sisrjh -Teža: 0,6 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 20.000 l, uporabna prostornina rezervoarja: 20.000 l, skupna višina: 7.010 mm, notranji premer: 2.000 mm, stenska struktura: enoslojni, obratovalni tlak: 11 letvica, Compressed Air Tank 20,000 Liters Manufacturer: OKS Capacity: 20,000 liters Operating Overpressure: +11 bar Test Pressure: +14.3 bar Operating Temperature: +50°C Dimensions: Total Height: 7,010 mm Cylindrical Height: 5,710 mm Diameter: 2,000 mm In the Cylinder: 1 x Manhole (320 x 420 mm) 3 x Female Threaded Sockets 1" 1 x Flanged Nozzle DN100 PN16 DIN 2633 Hsdpfx Adswrn N Rjrjfh In the Top Head: 1 x Female Threaded Socket 1" 2 x Lifting Lugs In the Bottom Head: 1 x Female Threaded Socket 1" 4 x Pipe Supports Includes complete technical pressure vessel documentation

Stanje: pripravljen za uporabo (rabljen), Speed range up to: 12,000 rpm Power at 6 bar compressed air: 900 W Stroke length (extension length): 1,000 mm Thread outlet: 45° Hfedod Iatijpfx Adrjh with collet: 6 mm

Stanje: rabljeno, Leto izdelave: 2010, Obratovalne ure: 58730 h Tehnični podatki: Maks. tlak zraka: 14 bar Maks. temperatura okolja: 50°C Hladilno sredstvo: R410A, 0,86 kg Priključek: 230 V Hodjydlycspfx Adrefh Teža, pribl.: 154 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Euchner CES-A-ABA-01 varnostno stikalo. Možna priključitev 1 bralne glave 2 varnostna kontakta (relejska kontakta) 1 notranji normalno odprt kontakt za vsak varnostni kontakt Vrednotilna enota Unicode Kategorija 3 / PL e v skladu z EN ISO 13849-1 Hodpev N Rvvefx Adrefh Dobro delujoče stanje. Oglejte si tudi naše druge oglase.

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 591144, 2* pocinkovan rezervoar za stisnjen zrak Vključuje certifikate Za vsak rezervoar velja: Konstrukcija: stoječa Prostornina rezervoarja: 5.000 l Maks. nadtlak: 11 bar Premer: 1.400 mm Višina rezervoarja: 3.570 mm Teža: 1.050 kg Priključek za vstop stisnjenega zraka: 2x DN 100 Priključek za izstop stisnjenega zraka: 2x DN 100 Priključek za varnostni ventil: G 2 Hfjdpfx Adjy Hx Dzeroh Priključek za manometri: G ½ Priključek za odvod kondenzata: G 2½ Inšpekcija rezervoarja: RL 2014/68/EU Vzdrževalne odprtine po AD2000: 1x revizijska odprtina Min. obratovalna temperatura: -10 °C Maks. obratovalna temperatura: +50 °C Površinska obdelava: pocinkano

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 2 * 2000L pocinkani tlačni rezervoarji za stisnjen zrak Vključena potrdila Na rezervoar: Hodpfoy Hx A Rsx Adrefh Oblika konstrukcije: stoječa Prostornina rezervoarja: 2.000 l Maks. nadtlak: 11 bar Premer: 1.150 mm Višina rezervoarja: 2.375 mm Teža: 471 kg Priključek za vhod stisnjenega zraka: 2x G 2½ Priključek za izhod stisnjenega zraka: 2x G 2½ Priključek za varnostni ventil: G 1 Priključek za manometer: G ½ Priključek za odtok kondenzata: G 2½ Pregled rezervoarja: RL 2014/68/EU Inšpekcijske odprtine po AD2000: 2x ročni odprtini Min. delovna temperatura: -10 °C Maks. delovna temperatura: +50 °C Površinska zaščita: Pocinkano

Leto izdelave: 2008, obratovalne ure: 8.000 h, stanje: rabljeno, številka stroja/vozila: 508202292, The OCHSNER GMLW 19 (often referred to as "GMLW 19 plus") is a powerful air-to-water split heat pump from the OCHSNER Golf series, suitable for heating and domestic hot water production in single- and multi-family homes. It delivers heating outputs around 17 kW (e.g., 16.8 kW at A2/W35) and operates efficiently with heating systems such as underfloor heating or radiators. The split design allows for space-saving installation while providing high efficiency and low operating costs, even at low outside temperatures. Key features: - Type: Air-to-water split heat pump (separate indoor and outdoor units) - Series: OCHSNER Golf Maxi Plus - Output: Heating capacity approx. 17 kW (e.g., 16.8 kW at A2/W35) - Heat source: Outside air - Heat distribution: Suitable for underfloor heating (low supply temperatures) and radiators - Domestic hot water: Usually generated by the heat pump itself with an additional storage tank - Efficiency: Achieves high efficiency, even in colder conditions, thanks to specialized evaporator technology - Installation: Simple installation due to the split concept, no ground collector required Hsdpfx Adeybv Ursrofh Areas of application: - Ideal for properties with a heated area of approx. 300-350 m² - Perfect for retrofit and new build projects, as it is compatible with existing heating systems (underfloor heating, radiators) This is a used air-to-water heat pump.

Stanje: rabljeno, Leto izdelave: 2021, Maks. tlak: 16 bar Hfsdexz Al Nepfx Adreh Moč: 0,81 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Kaeser Secotec TE 142 hladilni sušilnik Leto izdelave: 2021 Serijska številka: 149-8393351 Hfsdpjyy U I Nefx Adroh 16 barov Temperaturno območje: 3–60 °C Hladilno sredstvo: R513A Pretok: 14,50 m³/min – 14.500 l/min Skupna širina: 712 mm Skupna dolžina: 982 mm Skupna višina: 1.612 mm Skupna masa: 249 kg Kaeser sušilniki stisnjenega zraka zagotavljajo suh, optimalen stisnjen zrak za vse pretoke. Kot visoko kakovostni industrijski stroji zanesljivo ščitijo vaš sistem in procese pred poškodbami zaradi kondenzacije tudi v najtežjih pogojih.

Stanje: novo, Leto izdelave: 2025, Furnace output: 34 kW Working output: 29 kW New device, original packaging: Yes Warm air blower, flue gas fan, and control panel with digital display: included Warm air distribution pipes: 2 x 180 mm with 2 freely rotatable, plug-in bends Intake/air filter: large-surface fresh air filter with no loss of performance / included Flue outlet diameter: 160 mm Combustion chamber length: 500 mm Combustion chamber width: 400 mm Combustion chamber height: 590 mm Air delivery: 2200 m³/h Power consumption: 400W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air pipes: 1560 mm Hfjdspkwhqjpfx Adrsh Stove width: 550 mm Stove length without flue gas fan: 920 mm Weight: 200 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 49 kW Working output: 45 kW New device, original packaging: Yes Warm air blower, flue gas blower, electronic controller with digital display: included Fresh air filter, recirculation intake filter: large-area intake filter without performance loss / included Warm air distribution ducts: 2 x 200 mm with plug-in, freely rotating 90° elbows Flue diameter: 180 mm Furnace chamber length: 660 mm Furnace chamber width: 480 mm Furnace chamber height: 600 mm Air delivery: 3,500 m³/h Hfodpfjpn Nyzex Adroh Intake air filter: Yes, large-area filter without performance loss Power consumption: 550 W Designed for room volume: 1,000 m³ Weight: 310 kg