Zimmermann Fz 30 nakup rabljenega (25)

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.360 mm, pomik po osi Z: 1.000 mm, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 20 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 20 m/min, vrsta vhodnega toka: trifazni, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 9.000 obr/min, skupna masa: 15.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, First commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm Hodpfx Afox Iuguj Tefb (Zero-point clamping plates shown as well as further clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axis drives Feed rate X, Y, Z axis: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Pre-fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is supplied without enclosure and must be CE-compliant enclosed by the buyer. Special features: The tool changer, vacuum table including pump, and extraction device can be purchased at an additional cost. However, these are NOT included as standard equipment with the machine!

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.360 mm, pomik po osi Z: 1.000 mm, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 20 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 20 m/min, vrsta vhodnega toka: trifazni, vrtilni moment: 57 Nm, skupna masa: 15.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with handheld unit Working Range X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping Table Length x Width x Height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (Depicted zero-point clamping plates as well as other clamping devices are not included!) Milling Head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Drives for Linear Axes Traverse speed X, Y, Z axes: approx. 20 m/min Connection Data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Pre-fusing: approx. 63 A Dimensions, Weight Footprint of the machine without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional Equipment - 12-position tool changer - Minimum quantity external lubrication system - TT140 measuring probe Hfsdpfxex Ifdke Af Tjb Machine Condition Fully functional, machine is supplied without enclosure and must be made CE-compliant and enclosed by the buyer.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2005 Overhauled: 2022 Control system: SIEMENS SINUMERIK 840D PL Working area X-axis: 3,000 mm Y-axis: 2,500 mm Z-axis: 1,250 mm A-axis: +/- 100° C-axis: +/- 360° Operating hours Total machine hours: 110,000 h Total spindle hours: 60,000 h Current spindle hours: 1,900 h (new in February 2024) Clamping table Length x width: 3,000 x 2,500 mm T-slots: 18 H12 T-slot spacing: 250 mm Table load: 5,000 kg/m² Installation: above floor Milling head VH6 Spindle power: 41 kW Spindle speed: max. 10,000 rpm Torque: approx. 200 Nm Tool holder: HSK 100A Axis clamping A & C: 3,000 Nm Linear axis drives Drive technology: linear motor Feed speed X/Y/Z-axis: 40-60 m/min Hedpfsx Npmrsx Af Tofb Axis acceleration X/Y/Z-axis: 3-5 m/s² Electrical specifications Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Machine footprint: approx. 7,300 x 6,500 x 5,600 mm Total weight: 60 t Additional equipment - 1x chip conveyor, left - Video camera system for work area monitoring - 40 bar through-spindle coolant supply with belt filter system - 11 bar external coolant supply, front end - 30-position tool changer, with option for 20 additional positions - Renishaw RMP60 / Renishaw touch probe - BLUM tool measurement and tool breakage detection

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos Hfjdpenzpx Rofx Af Tsb -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.250 mm, največja hitrost vretena: 10.000 obr/min, Zimmermann FZ38 - 5-osni portalni center Letnik 2005 – leta 2022 popolnoma obnovljen in posodobljen pri Zimmermannu (investicija 600.000 €), z vsemi dokazili X 3000 Y 2500 Z 1250 A: +/- 100 stopinj C: +/- 360 stopinj 2 vretena: 50 kW – 24.000 min-1 in 44 kW – 10.000 min-1 HSK 100 Certifikat linearnosti osi 5 µm Hfjdpfx Aexziamjf Tsb Siemens krmiljenje U… Takoj na voljo Stroj je bil leta 2022 v podjetju Zimmermann popolnoma obnovljen in posodobljen. Takrat je bilo vanj vloženih cca. 600.000 €, vse račune lahko predložimo. Stroj je v zelo dobrem, skoraj novem stanju.

Stanje: rabljeno, Leto izdelave: 1986, Velikost križne mize: 490 x 400 mm Hodi (X,Y,Z): 320x385x430 mm Hitrost vrtenja: 560 - 14000 obr/min Vpenjalo orodja: SK 30 Hfedpfsxbh E Uox Af Teb Največja obremenitev mize: 100 kg Teža pribl.: 500 kg Modelarska rezkalna stroj Vključno s podstavno omaro in dodatki: 1 komplet vpenjalnih puš, čelne rezkarje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Hfedow Rl S Sspfx Af Tjb Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, delovne ure vretena: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h Travel ranges: X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Color Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer Hfsdpow Au H Rsfx Af Teb - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Hodpfowywciox Af Tsfb Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Initial commissioning: 2012 Control: Heidenhain iTNC 530 incl. HR 420 handwheel Hfodpfxsvy A Tno Af Tsb X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ±110° C-axis: ±300° Clamping Table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis Milling Head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 rpm Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blow air: external Linear Axis Drives Feed rate X, Y-axis: up to 50 m/min Feed rate Z-axis: up to 30 m/min Axis acceleration X, Y, Z: up to 2.5 m/s² Connection Data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, Weight Space requirement incl. peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Additional Equipment - Coolant supply with belt filter system - 30-position chain tool changer - Work area enclosure - Chip conveyor, right side Optional for an additional charge: - BLUM laser Machine condition Fully functional, very good condition. Already dismantled and in storage.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.500 mm, dolžina mize: 3.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 24.000 obr/min, vrtilni moment: 39 Nm, Pogoni – Linearne osi Pomik osi X-, Y-, Z- do 60 m/min Pospešek osi X-, Y-, Z- do 3 m/s² Pogoni – Rotacijske osi – VH10 Pomik osi A-, C- 180 °/s Pospešek osi A-, C- 700 °/s² Hfjdpfx Aex Elhqjf Teb Ločljivost osi A-, C- 0,0001° Natančnost – Linearne osi, po standardu VDI/DGQ 3441 in ISO 230-2 Natančnost pozicioniranja os X: P≤ 0,015 mm A≤ 0,011 mm os Y: P≤ 0,017 mm A≤ 0,013 mm os Z: P≤ 0,013 mm A≤ 0,010 mm Ponovljivost os X: Ps≤ 0,007 mm R≤ 0,006 mm os Y: Ps≤ 0,008 mm R≤ 0,007 mm os Z: Ps≤ 0,006 mm R≤ 0,005 mm Rezkalno vreteno – 34 kW Moč vretena S1 (100 % ED) 34 kW S6 (40 % / 2 min) 41 kW Hitrost vretena 24.000 min⁻¹ (stalno mazanje z mastjo) Navor S1 (100 % ED) 39 Nm S6 (40 % / 2 min) 49 Nm Konstantna moč 8.260–24.000 min⁻¹ Nagibna os – čelo vretena 250 mm Vpenjalni sistem HSK-A63 Vpenjanje orodja: vzmetna klema Odpiranje orodja: hidravlično Dovod pihalnega zraka: zunanje in skozi orodje Dovod hladilne tekočine: zunanje in skozi orodje

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 1095, Spoštovane stranke, trenutno vam ponujamo univerzalni rezkalni stroj za modelarstvo in orodjarstvo znamke Zimmermann. Tu so tehnični podatki stroja: Delovna miza: 630 x 490 mm Dodatna miza: 490 x 400 mm Krožno gibanje: 360° Nagib: 2x 90° Hfodpfexy Ntqjx Af Tjb Vpenjalni utor: 14 x 25 mm Moč: 1,1 kW Število vrtljajev: 560 - 14.000 min⁻¹ Nosilec orodja: ISO30 / SK30 - Motorna zavora - Motorizirano nastavljanje višine - Digitalni prikazovalnik z meritvami Heidenhain - CE označba - Omara s predali Potrebni prostor: 1.400 x 1.520 x 1.970 mm Teža: 790 kg Stroj je bil zaradi čiščenja v celoti razstavljen, vključno s podpornim delom. Tehnično in vizualno je stroj v odličnem stanju! Veselimo se vaših vprašanj in povpraševanj.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, X-axis travel: 2500 mm Y-axis travel: 3500 mm Z-axis travel: 1500 mm Control: HEIDENHAIN TNC 640 C-axis: ±360° Milling head - tiltable Milling head rotatable by ±360° Table size (longitudinal): 2500 mm Table size (crosswise): 3500 mm Table load capacity: 6 t/m² Coolant system: ICS 70 bar Feed rate: 60 m/min Spindle speed: 24,000 rpm Tool holder: HSK-A63 Milling spindle motor S6 (40% / 2 min): 41 kW Spindle torque S6 (40% / 2 min): 49 Nm Milling spindle motor S1 (100% / 2 min): 34 kW Spindle torque S1 (100% / 2 min): 39 Nm Tool changer: 60 positions Machine weight: approx. 74 t Space requirements: approx. 4 x 7.5 x 5.4 m This thermosymmetric, ergonomic, universal ZIMMERMANN FZU32 gantry milling machine is in as-new condition and available immediately. Hfsdpovwgtyofx Af Tsb DESCRIPTION: The FZU32 is a remarkably compact 5-axis gantry milling machine for machining aluminium, composite materials, plastics, ureol, and steel. Thanks to the particularly rigid, newly developed central-guided gantry, we are able to meet the increasing demands in model, tool, and mould making. This thermosymmetric design makes the FZU32 less susceptible to adverse environmental conditions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Universal Table Router FZ0 by Zimmermann Modelmaking milling machine with adjustable Bosch motor GGS 27 LC Ideally suited for model making and tool & die manufacturing. Drive motor: 230V, 0.6kW Spindle speed adjustable: approx. 12,000 – 27,000 rpm Machine table: approx. 590 x 420 mm Aggregate tilting both sides up to 90 degrees Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Including the milling cutters and router bits shown Comes with a lockable base cabinet, 2 drawers, 1 door, key included The previous owner fitted the base cabinet with an angled aluminum sheet, offering an integrated extraction option, see photos Waldmann task light with integrated magnifier Original paint, touched up in some areas CE marking Very well-maintained machine from prototype manufacturing in the motorsport division of a well-known Wolfsburg automotive manufacturer. Has apparently seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg Hfodpfx Afjw Ip Dgo Tob The machine can be inspected and demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse. Please see "other offers from this supplier."

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Dear customers, Hfjdpjxlzg Hsfx Af Teb We are currently offering, upon request/order, a refurbished table router, model FZ0 from F. Zimmermann. Below are the machine’s technical specifications: Work table: 590 x 420 mm Rotary movement: 360° Table tilt: 2x90° Milling spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: Collet chuck with locking nut Ø 8 mm - CE mark - Vernier stop - Plexiglass milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. Included with the machine are a tilting table and a set of milling tools – a fully equipped package! VAT will be listed separately on the invoice. Shipping available at an additional cost. Current delivery time: 6 weeks Should you have any questions, please do not hesitate to contact us!

Stanje: generalkompletno obnovljen (rabljeno), Dear customers, we are currently offering, upon request/order, factory-refurbished disc or plate sanding machines for model and mold making from the Zimmermann brand. Here are the technical specifications of a SZ2 type machine: Disc diameter: 600 mm, double-sided Table length: 755 mm Table width: 285 mm Table tilting: 30/45° Bevel stop: 60/60° Power: 1.5 kW Speed: 1,000 rpm Reversible rotation (right/left) Waldmann machine lamp, dust and shock resistant Emergency stop with motor brake Angle stop Dimensions: L 90 cm x W 80 cm x H 140 cm Weight: 390 kg After refurbishment, the machine is equipped with completely new electronics including a motor brake, is painted in RAL 7035 light grey, and comes with accessories such as a bevel stop, adhesive, and sanding discs included in delivery. We look forward to your questions and inquiries! Hfedpex Ahi Aofx Af Teb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Profile belt sander, PS0 Rasprofil by Zimmermann with extensive accessories Sanding machine with swiveling table and additional equipment for rasping. Ideal for use in model making and mold construction. For precise sanding of contours. All adjustments via clamping lever and fine adjustment. Drive motor 400V, 1.1 kW Table swivels forward up to 45 degrees and backward up to 20 degrees Machine table approx. 400 x 400 mm Foldable upper extraction arm for sanding large components. By locking the freestanding profile rail into the upper machine section, a high level of angular accuracy can be achieved. Includes three profile guide rails, 15, 30, and 40 mm (straight and radius). Also includes several sanding belts, see photos. Three unused rasps. Extraction connection 80 mm Waldmann mounted lamp Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg-based automobile manufacturer. Apparently, it has rarely been used so far. Hedpfow Iqvqjx Af Tefb Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be inspected and demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'other offers from this seller.'

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: RM140, skupna višina: 2.441 mm, skupna širina: 2.175 mm, skupna dolžina: 6.500 mm, vrsta vhodnega toka: trifazni, skupna masa: 10.500 kg, vhodna napetost: 380 V, leto zadnje generalne obnove: 2025, moč: 12 kW (16,32 KM), višina izdelka (maks.): 330 mm, največja dolžina izdelka: 90 mm, Stroj za pranje steklenic s kapaciteto 4500 steklenic na uro. Leta 2022 obnovljen s strani proizvajalca (PAC). Od takrat malo ur delovanja (500 h). Možen je nakup celotne linije: pralni stroj, napihovalnik zraka (sušenje steklenic), kotel, transporterji. Hedpfxox R Tv Hs Af Tefb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Grinding table tiltable upwards/downwards: 30/45° Grinding wheel drive motor: 1.5 kW Hjdpfevkdqiex Af Tsfb Space required: 870 x 650 x 1280 mm including extraction unit SZ 1, 380 V, 1.5 kW

Stanje: rabljeno, Model making machines including over 100 sanding belts including approx. 30 belts 15 mm, approx. 30 belts 30 mm, approx. 10 belts 40 mm including 11 profile sanding sticks Used, top condition, low hours Manufacturer: Zimmermann Type: PS 1 Hfsdpfowhqxajx Af Tob Belt length: 2700 mm - 2710 mm Extraction connection: D 80 mm Space requirement: approx. 1000 mm x 600 mm x 1800 mm Weight: approx. 400 kg Location: 97447 Gerolzhofen, loaded free onto truck, unpacked Handover as seen in current condition, without any guarantee or warranty

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 220, Spoštovani kupci, trenutno vam ponujamo zelo dobro rabljeni vertikalni tračni brusilni stroj blagovne znamke F. Zimmermann, primeren za izdelavo modelov in orodij. Tehnični podatki: Širina brusnega traku: 250 mm Višina brušenja: 400 mm Dolžina traku: 2.400 mm Hitrost brušenja: 18 m/s Delovna miza: 750 x 350 mm Nagib: 30/45° Moč: 4,0 kW Število vrtljajev: 1.400 o/min Premer priključka za odsesavanje: 120 mm Dimenzije: 990 x 850 x 1.740 mm Teža: 470 kg Oprema: Hedpexy Nrgefx Af Tjfb - Nožno zasilno stikalo Cena brez DDV, ta bo na računu naveden posebej.

Stanje: skoraj kot novo (rabljeno), Komplet šestih rašpljev za profilni brusilni stroj Zimmermann PS 0 z rašpljevim profilom. Rašplji so praktično kot novi, glejte fotografije. Hedpfsw Ni Egsx Af Tsfb Prodaja samo kot komplet, prodaja posameznih kosov ni mogoča. Stroj je mogoče po predhodnem dogovoru prikazati pri nas na lokaciji. Ponujamo samo stroje, ki so pripravljeni za predstavitev v našem skladišču, glejte "druge ponudbe tega ponudnika".

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Dear customers, we are currently offering you a fully refurbished oscillating drum sanding machine for model and mold making, made by Zimmermann. Here are the technical specifications for type OZS: Hfsdpfx Afoxlzize Tob Table length: 500 mm Table width: 500 mm Table height above floor: 1,050 mm Drum diameter: 20–120 mm Voltage: 400V Power: 1.4 / 1.8 kW Speed: 1,400 / 2,800 rpm Extraction port diameter: 100 mm with emergency stop Dimensions: 840 x 810 x 1,300 mm Weight: 180 kg The machine has been newly painted in RAL 7035 light grey. A completely new control cabinet has been built and installed, meaning that all electrics are brand new. For machine safety, a motor brake and emergency stop system have been fitted. Mechanical components were either purchased from the manufacturer or custom made. Included in the scope of delivery are one drum of your choice, sanding sleeves, and other machine-specific accessories. The machine is sold with a 6-month warranty! Price plus VAT, which will be shown separately on the invoice. Free and insured shipping within Germany! If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Komplet profilnih brusilnih letev za Zimmermann profilni brusilni stroj PS 0, ali PS 0 z rašpastim profilom Vsaka po ena obojestranska letev v širini 15, 30 in 40 mm, ena stran ravna, druga stran z radijem. Letve izgledajo praktično kot nove, glejte slike. Vključno z vsakim 1 kartonom brusnih trakov P80 v širini 15, 30 in 40 mm. Dolžina brusnega traku: 1985 mm, primerno za Zimmermann PS0. Hfsdpfx Afsw Nizbs Tsb Prodaja le v kompletu, posamezna prodaja ni možna. Stroj lahko po dogovoru demonstriramo pri nas na lokaciji. Ponujamo samo stroje, ki so pripravljeni na demonstracijo v našem skladišču, glejte "druge ponudbe tega ponudnika".

Stanje: generalkompletno obnovljen (rabljeno), Dear customers, we currently offer idler rollers as well as drive rollers for profile belt sanding machines from the brand F. Zimmermann. The rollers have been newly coated with a more durable material for improved longevity, then crowned ground and fitted with new bearings. You will receive fully refurbished rollers in exchange for your defective rollers! The rollers are suitable for the following machine types: Zimmermann PS0, regardless of year of manufacture Zimmermann PS1, regardless of year of manufacture Zimmermann PS1/2, regardless of year of manufacture Zimmermann PS S, regardless of year of manufacture When placing orders, please always specify the machine type and indicate which rollers you need and in what quantity. All items are in stock and can be delivered at short notice. Hfedpfod S Eb Aex Af Teb If you have any further questions, I am happy to assist you!