Weeke Venture 108 M nakup rabljenega (75)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, največja hitrost vrtenja: 2.970 obr/min, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Dcedpfxeyzy T To Ap Ask Minimum panel length: 250 mm Minimum panel width: 100 mm Number of lower vertical groups: 5 Number of upper vertical groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of lateral horizontal groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Installed total power: 35 kW EQUIPMENT Lateral horizontal groups Group positioning via CNC Z-axis positioning via CNC Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual physical and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6157

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Moving table (workpiece), static working head – horizontal table (workpiece). Control system: PowerControl PC86 powerTouch (woodWOP software). Safety enclosure for the working head. No. 2 workpiece clamps for access to the working area. WEEKE pre-positioning unit for quick positioning of workpieces in the machine with clamping jaws. Support table (workpiece support) at infeed; outfeed table (with powered belt). Dcsdpfsyyvttsx Ap Aek With automatic panel pusher. Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm). Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (optional 1300) x 80 (2 x 40 mm). Simultaneous processing of up to 2 workpieces (on the Z-axis). Separate switch cabinet and operator console. WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW). WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW).

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) Dedpfodg Itnjx Ap Asck High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) Dcedpedz Uk Tefx Ap Ask No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Djdpfxed Nvi Ds Ap Ajck Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) Dsdpfx Asgwbbqop Ajck No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Contro Open powerTouch, Software: WoodWOP (TAPIO Ready) Infeed Table (panel support) + Outfeed Table (panel support) Panel feed via 3 transport belts Min. workpiece dimensions (X-Y-Z): 250 x 100 x 12 mm Max. workpiece dimensions (X-Y-Z): 2500 x 1050 x 60 mm Special lateral guiding system for workpieces with "sensitive" edges 3 upper vertical pressure devices Powered conveyor belt for waste disposal Integrated electrical and control cabinet Total installed power: approx. 47 kW OPTIONAL: Wireless barcode scanner 2 WORKING UNITS (TOP) – (SERVO MOTOR for X-Y-Z axis): 4 V15 drilling heads (4 x 2.3 kW) each with 15 vertical spindles (total of 60 upper spindles) 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR for X-Y-Z axis): 6 V32 drilling heads (6 x 2.3 kW) each with 32 vertical spindles (total of 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 H21 drilling heads (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left) Dcsdpfxex Aqi Eo Ap Ajk

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Dcsdpsh Ryhnofx Ap Aok Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), PC-krmiljenje Power Control PC85T Programska oprema WoodWOP + TOPDRILL Št. 2 prehodnih motoriziranih transportnih trakov Št. 2 horizontalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 1 vrtalna enota za vsak horizontalni vrtalni nosilec (1 x 1,5 kW) Št. 21 vreten za vsako horizontalno vrtalno enoto Največja delovna širina (mm) 2500 Dcjdpfeyv Ev Aex Ap Ajk Najmanjša delovna širina (mm) 250 Št. 4 spodnji vertikalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 2 vrtalni enoti za vsak spodnji vertikalni vrtalni nosilec (2 x 1,5 kW) Št. 4 zgornje vertikalne vpenjalne enote za obdelovance Transportni trak za odvoz odrezkov Skupna priključna moč (kW) 35

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 Djdpelikvhjfx Ap Aeck X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, številka stroja/vozila: 0-250-12-2554, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 1.000 mm, širina obdelovanca (maks.): 3.000 mm, višina obdelovanca (maks.): 80 mm, model krmilnika: PC 85, DÉTAILS TECHNIQUES Largeur de la pièce min. : 250 mm Largeur de la pièce max. : 3 000 mm Longueur de la pièce min. : 100 mm Longueur de la pièce max. : 1 000 mm Hauteur de la pièce min. : 8 mm Hauteur de la pièce max. : 80 mm Unité de travail verticale supérieure Broche verticale ETP-6 puissance : 6 kW Diamètre de la fraise à rainurer : 125 mm Broches de perçage verticales : 32 (puissance 2,7 kW) Broches de perçage horizontales : 10 (8 en X + 2 en Y) Unité de travail verticale inférieure Broche verticale ETP-6 puissance : 6 kW Diamètre de la fraise à rainurer : 125 mm Broches de perçage verticales : 32 (puissance 2,7 kW) Broches de perçage horizontales : 10 (8 en X + 2 en Y) DÉTAILS DE LA MACHINE Dcedjydnu Nepfx Ap Aok Commande : PC 85 Logiciel : woodWOP 6 ÉQUIPEMENT Cabine de sécurité pour outillage 2 mandrins de serrage pour le blocage et le déplacement de la pièce pendant l'usinage Banc de chargement avec table à coussin d'air Convoyeur à rouleaux motorisé pour l'évacuation des panneaux Possibilité d'usinage simultané de deux panneaux

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 4.300 mm, največja hitrost vrtenja: 24.000 obr/min, Oprema: CE označba, TECHNICAL DETAILS X-axis travel: 2,500 mm Y-axis travel: 4,300 mm Maximum workpiece clearance: 60 mm Spindle speed (Milling Unit 1): 24,000 rpm Spindle speed (Milling Unit 2): 24,000 rpm Spindle speed (Milling Unit 3): 24,000 rpm Number of controlled axes (Milling Unit 1): 4 Number of controlled axes (Milling Unit 2): 3 Number of controlled axes (Milling Unit 3): 3 MACHINE DETAILS Number of working zones: 2 Number of clamps: 9+4 Motor power (Milling Unit 1): 12 kW Dcodpfxsxw Ugds Ap Ask Motor power (Milling Unit 2): 12 kW Motor power (Milling Unit 3): 12 kW Tool magazine 1: 14 positions, mounted on the side of the machine Tool magazine 2: 14 positions, mounted on the side of the machine EQUIPMENT Clamps for securing the workpiece Automatic panel loading system Motorized transfer Automatic tool changer Barcode label printer CE marking Safety guards mounted on the machine Note: Tools and the automatic chip extraction system are not included in the offer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.700 mm, pomik osi Y: 1.550 mm, hitrost pomika os X: 96 m/min, hitrost podajanja osi Y: 96 m/min, največja hitrost vrtenja: 24.000 obr/min, DÉTAILS TECHNIQUES Course axe X : 3 700 mm Course axe Y : 1 550 mm Course axe X (levée) : 4 538 mm Course axe Y (levée) : 1 952 mm Passage maximal de la pièce : 100 mm Vitesse de déplacement axe X : 96 m/min Vitesse de déplacement axe Y : 96 m/min Vitesse de déplacement axe Z : 25 m/min Nombre d’axes commandés : 3 axes Nombre de broches de perçage : 7 Nombre de positions d’outils : 8 Table de nesting Longueur : 1 550 mm Largeur : 3 700 mm Matériau : Bakélite Nombre de pompes : 4 Capacité individuelle : 108 m³/h Unité de perçage Unité : supérieure Broches pour perçages verticaux : 7 Unité de fraisage Unité : supérieure Nombre d’axes commandés : 3 Changeur d’outils automatique : oui Puissance du moteur : 9 kW Vitesse max. : 24 000 tr/min DÉTAILS MACHINE Puissance totale installée : 26 kW ÉQUIPEMENT Pompe à vide Système de contrôle PC85 Logiciel WoodWOP Marquage CE Rideaux immatériels de sécurité Remarque : Les outils ne sont pas compris dans l’offre. Dsdpfx Apsxw Up So Ajck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, številka stroja/vozila: 0-250-17-2346, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 300 mm, število osi: 4, največja hitrost vretena: 24.000 obr/min, TEHNIČNE PODROBNOSTI Gib osi X: 4.300 mm Gib osi Y: 2.250 mm Gib osi Z: približno 300 mm Dcjdpjzld Iyjfx Ap Ajk Glavna vretena Moč: 10 kW Vmesnik za orodje: HSK-F63 Največja hitrost vretena: 24.000 vrt/min Konfiguracija osi Število nadzorovanih CNC osi: 4 Interpolirajoča os C Servo-nadzorovana os Z Menjalnik orodij Število mest: 14 Nosilec orodja: HSK-F63 Vrtalna enota Število vrtalnih vreten: 12, vertikalno Integrirana rezalna žaga Vakuumska naprava Vakuumske črpalke: 3 x Becker MM1322 AV Skupni pretok zraka: približno 300 m³/h PODROBNOSTI O STROJU CNC-nadzor Različica: WoodWOP 6 Industrijski računalnik Beckhoff Beckhoff TwinCAT CNC Digitalni servo pogoni Bosch Rexroth IndraDrive SERCOS nadzor gibanja Napetost: 415 V Frekvenca: 50 Hz Faze: 3 Tok pri polni obremenitvi: 61 A Glavna varovalka: 80 A Nadzorna napetost: 24 VDC OPREMA Matrični vakuumski miza 10 vakuumskih con Robustna konstrukcija portala Avtomatski centralni sistem za mazanje Dvojne sesalne nape z avtomatskim nastavljanjem položaja

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Weeke prehodni vrtalni stroj BST 500, vrtalne glave desno in levo, 5 kos spodaj, nobene zgoraj. 5 vrtalnih strojev na zalogi. Prodaja se posamezno. Djdpfezb El Hex Ap Asck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, številka stroja/vozila: 0-250-05-2654, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.950 mm, pomik osi Y: 1.943 mm, pomik po osi Z: 400 mm, model krmilnika: HOMATIC-2000 IPC, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit, X direction Drilling spindles: 16 Feed stroke Z: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle distance: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit, Y direction Drilling spindles: 15 Feed stroke Z: 60 mm Drive: 1.5 kW Rotation direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drill chuck: d = 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle distance: 32 mm (15 spindles) Spindle type: individually controllable Orientation: Y direction Horizontal drilling unit, X direction Drilling spindles: 4 Drilling depth: max. 38 mm Drilling height Z direction: 38 mm Rotation direction: counterclockwise Speed: 4,800 rpm Drill chuck: d = 10 mm Dcedpfx Aox Sqm Ssp Aek Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit, Y direction Drilling spindles: 2 Drilling depth: max. 38 mm Drilling height Z direction: 38 mm Rotation direction: clockwise Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Milling motor Drive power: 7.5/10 kW (S1/S6 operation) Speed range (stepless): 750 – 18,000 rpm Cooling: liquid circulation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine slots: 30 tool positions Tool weight: max. 5 kg Changeover time: approx. 8 – 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid circulation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT integrated CNC axis (360° rotating) torque support main spindle (motor output 7.5 / 10 kW, HSK F63) workpiece support system 1,500 mm workpiece console K-table 1,500 mm gantry extension Y-direction 120 mm compressed air connection bar with quick couplings extraction hood for additional router motor router 5 kW with hydro quick-clamping system left-side safety guard with door safety tread mat 3,250 mm control panel left Note: For further details on the machine’s equipment, please refer to the attached documents.

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vhodni tok: 50 A, število osi: 3, število mest v zalogovniku orodij: 12, skupna dolžina: 5.000 mm, skupna širina: 2.900 mm, skupna masa: 4.500 kg, Oprema: CE označba, dokumentacija / priročnik, CNC rezkalni stroj z magazinom za 12 orodij, drži obdelovanec s pomočjo vakuma, vključuje vakuumsko črpalko. Dsdpjza U Nxofx Ap Ajck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, številka stroja/vozila: 0-250-18-0294, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.900 mm, pomik osi Y: 1.350 mm, pomik po osi Z: 370 mm, dolžina mize: 3.550 mm, širina mize: 1.355 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe pomeni obveznost pravočasnega prevzema do konca 45. tedna! TEHNIČNI PODATKI Pomik X osi: 3.900 mm Pomik Y osi: 1.350 mm Pomik Z osi: 370 mm Število rezkalnih vreten: 1 Dolžina mize: 3.550 mm Širina mize: 1.355 mm Dedpfsxgd Ezjx Ap Asck Delovno območje Z osi: 100 mm PODROBNOSTI O STROJU Teža: 4.500 kg Moč: 22,0 kW OPREMA Svedralno orodje Dokumentacija CE označba

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, številka stroja/vozila: 0-250-15-0310, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.250 mm, pomik osi Y: 1.300 mm, število mest v zalogovniku orodij: 9, hitro pomikanje X-os: 80 m/min, premer obdelovanca (maks.): 60 mm, DÉTAILS TECHNIQUES Courses de déplacement Course axe X : 6 250 mm Course axe Y : 1 300 mm Avances rapides Avance rapide axe X : 80 m/min Dedpfx Asxdw Tgjp Aeck Avance rapide axe Y : 60 m/min Avance rapide axe Z : 20 m/min Course axe X : 8 360 mm Course axe Y : 2 015 mm Puissance moteur broche principale : 9 kW Nombre d’axes contrôlés : 3 Nombre de broches de perçage : 50 Diamètre maximal de la pièce : 60 mm Positions d’outils : 9 (8 dans le magasin d’outils 1, 1 dans le magasin d’outils 2) DÉTAILS MACHINE Puissance totale installée : 18 kW Système de commande : HOMATIC-200 Modèle de commande : WOODWOP 7.0 Norme de sécurité : Marquage CE ÉQUIPEMENT Documentation/manuel Vitesse réglable en continu Changeur d’outils automatique Pompe à vide Surface de travail avec supports à consoles à vide Éléments d’aspiration pour maintenir la pièce usinée 1 unité de fraisage 2 unités de perçage (25 broches chacune) 2 unités de coupe Remarque : Les outils ne sont pas inclus dans la vente ni dans la livraison.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1976, številka stroja/vozila: 1299, Značka: Weeke Model: PE 75 Rok výroby: 1976 Dodju Nwzcopfx Ap Aeck Motor: 7,5 kW, 50 Hz, 380V, trojfázový Skladové číslo: 10316

Stanje: rabljeno, številka stroja/vozila: 005796, Delovno območje os X: 3700 mm Delovno območje os Y: 1550 mm Moč glavnega vretena: 9 kW Dodpfxehwi U Tj Ap Aeck Število krmiljenih osi: 3 osi Število vrtalnih vreten: 10 Število mest za orodja: 8

Stanje: rabljeno, številka stroja/vozila: 006488, Delovno območje X-os: 2500 mm Delovno območje Y-os: 850 mm Moč glavnega vretena: 5 kW Število krmiljenih osi: 3 osi Število vrtalnih vreten: 11 Dcedpfx Apswuclxs Ask

Stanje: rabljeno, številka stroja/vozila: 007665, Pozicija 1: Pretočna vrtalni stroj WEEKE-BST 503 + BST 507 Dcsdpfx Aowuz Dgsp Ask Pozicija 2: Pretočna vrtalni stroj WEEKE-BST 503 + BST 507

Stanje: rabljeno, številka stroja/vozila: 007400, Maks. širina panela: 800 mm Maks. dolžina panela: 1250 mm Število injektorjev: 1 Pozicioniranje preko NC krmiljenja: da Djdpfx Aot Hmt Isp Ajck Stranske horizontalne skupine: da

Stanje: rabljeno, številka stroja/vozila: 007564, Delovno območje os X: 3700 mm Delovno območje os Y: 1550 mm Delovna površina: nesting miza Moč glavnega vretena: 10 kW Dodeum H Ekopfx Ap Aock Število krmiljenih osi: 3 osi Število vrtalnih vreten: 12 Število mest za orodje: 13