Weeke Bhc 350 nakup rabljenega (70)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Hedpfxoyg E R Ho Al Dju Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical drilling unit 2V21 HIGH SPEED 7500 Stroke in Z-direction: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle pitch: 32 mm Spindle type: individually controlled Horizontal drilling unit 2H4X/1Y 4 drill spindles each in X-direction 1 drill spindle each in Y-direction Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm from workpiece top edge Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Spindle type: individually controlled Grooving saw unit N2 X-Y 90° Cutting depth: 30 mm Cutting cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling unit F2-ETP-6 KW Tool holder: for shank diameter d = 25 mm Tool diameter: max. 60 mm Tool projection length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool clamping: manual, hydro quick-change system ETP 25 Rotation direction: clockwise/counterclockwise Speed: 6,000 - 18,000 rpm, stepless programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material loading "IgeL-ROBOT" Lower workpiece support Upper workpiece support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader, make: Datalogic

Stanje: rabljeno, številka stroja/vozila: 006157, Max. panel width: 1000 mm Hedpfx Aley Nkyaj Deu Max. panel length: 2500 mm Number of units: 5 Number of units: 1 Positioning via NC control: yes Lateral horizontal groups: yes

Stanje: rabljeno, številka stroja/vozila: 008170, Delovno območje os X: 4300 mm Delovno območje os Y: 2250 mm Delovna površina: nesting miza Moč glavnega vretena: 9 kW Število krmiljenih osi: 4 osi Hedpfx Alsx A Tcuj Deu Število vrtalnih vreten: 12 Število mest za orodje: 14

Stanje: rabljeno, Leto izdelave: 1998, WEEKE BP 150/K Proizvajalec: WEEKE Hodpfx Aezvbhrol Dou Tip: BP 150/K Letnik: 1998 Vrsta stroja: CNC obdelovalni center / točkovno-točkovno upravljanje Stroj z iztegnjenim roko Delovno območje X: približno 3.645 mm* Delovno območje Y: približno 1.250 mm* Delovno območje Z: približno 250 mm* 1 glavna vretenčna moč: 10 kW Hitrost glavnega vretena, maks.: 24.000 vrt/min Nosilec orodja: HSK-F63 Menjalnik orodij: 8-kraki 4. os 30 vertikalnih vreten 6 horizontalnih vreten Sistem mize: konzolna miza Število konzol: 8 Vakuumska črpalka Varnostna naprava Krmilnik: HOMAG HOMATIC 2000 / HOMATIC 2000 IPC* Programska oprema: HOMAG woodWOP 4.5 4. os: C-os / NC-nadzorovana dodatna os*

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.700 mm, pomik osi Y: 1.550 mm, hitrost pomika os X: 96 m/min, hitrost podajanja osi Y: 96 m/min, največja hitrost vrtenja: 24.000 obr/min, DÉTAILS TECHNIQUES Course axe X : 3 700 mm Course axe Y : 1 550 mm Course axe X (levée) : 4 538 mm Course axe Y (levée) : 1 952 mm Passage maximal de la pièce : 100 mm Vitesse de déplacement axe X : 96 m/min Vitesse de déplacement axe Y : 96 m/min Vitesse de déplacement axe Z : 25 m/min Nombre d’axes commandés : 3 axes Nombre de broches de perçage : 7 Nombre de positions d’outils : 8 Table de nesting Longueur : 1 550 mm Largeur : 3 700 mm Matériau : Bakélite Nombre de pompes : 4 Capacité individuelle : 108 m³/h Unité de perçage Unité : supérieure Broches pour perçages verticaux : 7 Unité de fraisage Unité : supérieure Nombre d’axes commandés : 3 Changeur d’outils automatique : oui Puissance du moteur : 9 kW Vitesse max. : 24 000 tr/min DÉTAILS MACHINE Puissance totale installée : 26 kW ÉQUIPEMENT Pompe à vide Système de contrôle PC85 Logiciel WoodWOP Marquage CE Rideaux immatériels de sécurité Remarque : Les outils ne sont pas compris dans l’offre. Hjdpexw Up Sofx Al Deu

Stanje: rabljeno, številka stroja/vozila: 008014, Maks. dolžina plošče: 1250 mm Stranske horizontalne skupine: da Hodpfx Alowuz S Do Dsu

Stanje: rabljeno, številka stroja/vozila: 006228, Working area X-axis: 3700 mm Hedpfx Aloy Nkwre Dsu Working area Y-axis: 1550 mm Working table: nesting table Main spindle power: 9 kW Number of controlled axes: 3 axes Number of drilling spindles: 7 Number of tool stations: 8

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 Hedpfx Alsivawpe Dou No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 1.252 mm, pomik po osi Z: 200 mm, število osi: 3, največja hitrost vretena: 24.000 obr/min, Ta 3-osna naprava tipa Weeke OPTIMAT BP 120 je bila izdelana leta 2001. Ima delovno površino 2800 mm v smeri X, 1252 mm v smeri Y in 200 mm v smeri Z. Naprava ima avtomatski menjalnik orodij z 8-mestnim pomnilnikom orodij in največjo hitrostjo vretena 24.000 vrt/min. Če iščete visokokakovostne možnosti CNC obdelave lesa, razmislite o modelu Weeke OPTIMAT BP 120, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • CNC-programska oprema: HOMAG WOODWOP 4.0 • Električni sistem: 400 V, 50 Hz, 3~ + N; nazivni tok 32 A; nadzorna/pomočna napetost 24 V; vrednost varovalke 35 A Hjdpfx Aozwnh Uel Dju • Avtomatski menjalnik orodij: Da; kapaciteta pomnilnika orodij: 8 mest • Delovna miza: konzola / podstavek in tir; dolžina delovne mize 3260 mm; število konzol: 6 • Glavno vreteno: 1 kos; vpenjalno orodje HSK-F63 • Vretena za vrtanje: vertikalna 21; horizontalna (X) 4; horizontalna (Y) 2 • Žaga za utore: smer X • Sistem za vpenjanje obdelovanca: vakuumski sistem; vakuumski sistem: Da

Stanje: rabljeno, številka stroja/vozila: 008166, Delovno območje os X: 4250 mm Delovno območje os Y: 1250 mm Delovna površina: Z vakuumskimi konzolami Moč glavnega vretena: 9 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 25 Hodpfeyy U S Isx Al Dou Število orodnih mest: 14

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, največja hitrost vrtenja: 2.970 obr/min, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of lower vertical groups: 5 Hodpfx Asyzy T Tol Deu Number of upper vertical groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of lateral horizontal groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Installed total power: 35 kW EQUIPMENT Lateral horizontal groups Group positioning via CNC Z-axis positioning via CNC Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual physical and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6157

Stanje: rabljeno, številka stroja/vozila: 005289, Delovno območje os X: 7400 mm Hjdpfx Aswcyacjl Dju Delovno območje os Y: 1550 mm Delovna površina: Nesting miza Moč glavnega vretena: 11 kW Število kontroliranih osi: 4 osi Število vrtalnih vreten: 10 Število mest za orodja: 14

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Hjdpfx Alogwbbqs Deu Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1976, številka stroja/vozila: 1299, Značka: Weeke Model: PE 75 Rok výroby: 1976 Motor: 7,5 kW, 50 Hz, 380V, trojfázový Hsdpfsu Nwzcox Al Dju Skladové číslo: 10316

Stanje: rabljeno, številka stroja/vozila: 007601, Working area X-axis: 4320 mm Working area Y-axis: 2245 mm Hjdpfx Aju N Skfjl Dsu Working surface: nesting table Main spindle power: 9 kW Number of controlled axes: 3 axes Number of drilling spindles: 16 Number of tool stations: 8

Stanje: rabljeno, številka stroja/vozila: 005796, Delovno območje os X: 3700 mm Delovno območje os Y: 1550 mm Moč glavnega vretena: 9 kW Število krmiljenih osi: 3 osi Hedpehwi U Tofx Al Dou Število vrtalnih vreten: 10 Število mest za orodja: 8

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, številka stroja/vozila: 0-250-05-2654, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.950 mm, pomik osi Y: 1.943 mm, pomik po osi Z: 400 mm, model krmilnika: HOMATIC-2000 IPC, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit, X direction Drilling spindles: 16 Feed stroke Z: 60 mm Drilling depth: max. 38 mm Hsdpfx Alox Sqm Se Dsu Rotation direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle distance: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit, Y direction Drilling spindles: 15 Feed stroke Z: 60 mm Drive: 1.5 kW Rotation direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drill chuck: d = 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle distance: 32 mm (15 spindles) Spindle type: individually controllable Orientation: Y direction Horizontal drilling unit, X direction Drilling spindles: 4 Drilling depth: max. 38 mm Drilling height Z direction: 38 mm Rotation direction: counterclockwise Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit, Y direction Drilling spindles: 2 Drilling depth: max. 38 mm Drilling height Z direction: 38 mm Rotation direction: clockwise Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Milling motor Drive power: 7.5/10 kW (S1/S6 operation) Speed range (stepless): 750 – 18,000 rpm Cooling: liquid circulation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine slots: 30 tool positions Tool weight: max. 5 kg Changeover time: approx. 8 – 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid circulation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT integrated CNC axis (360° rotating) torque support main spindle (motor output 7.5 / 10 kW, HSK F63) workpiece support system 1,500 mm workpiece console K-table 1,500 mm gantry extension Y-direction 120 mm compressed air connection bar with quick couplings extraction hood for additional router motor router 5 kW with hydro quick-clamping system left-side safety guard with door safety tread mat 3,250 mm control panel left Note: For further details on the machine’s equipment, please refer to the attached documents.

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 Hedpod Nvi Dofx Al Deu WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36 Hsdpfx Alodz Uk Te Dou

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Hsdpedg Itnofx Al Deu Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2