Weber Cr 8 nakup rabljenega (105)

Stanje: rabljeno, Vibratory Feeder with Pneumatic Screwdriving Stand Eco Line Vibratory feeder, sorting device, bowl feeder, vibrating bowl, automatic screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl inner height: 70 mm Sorting rail width: 10 mm Mains connection: 230 Volt, 50 Hz Operating pressure: 6 bar (for separation and screws) Valve control voltage (pneumatics): 24 Volt - Stepless vibration speed controller = stepless conveying speed - Vibrating bowl in protective housing - with pneumatic feeding system - Feed pulse via external electrical control - The feeder was used for supplying M5 x 12 mm screws - Some pneumatic hoses need replacing - Siemens S7-200 PLC CPU 224 MISSING Space requirement vibrating bowl L x W x H: 450 x 450 x 315 mm Weight vibrating bowl: 32 kg Kodpfx Afjxf Up Uo Noll Screwdriving Stand WEBER Eco Line Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screw holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screw guide diameter: Ø 37 mm Distance screw guide to table: 135 - 465 mm - 1 pc flat cylinder FESTO, type DZF-32-125-P-A-SM - 1 pc flat cylinder FESTO, type probably DZF-32-30-P-A-SM - Screw feed frame on linear guide - 3 position sensors on cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriving stand dimensions W x D x H: 200 x 410 x 1050 mm Weight screwdriving stand: 35 kg good condition Total weight vibrating feeder and screwdriving stand: 67 kg Note: The original Siemens S7-200 PLC CPU 224 is missing (see photo control cabinet without PLC), therefore, in this condition, no automatic sequence is possible. The controller also managed the sequence for screw separation and the screwdriver itself. The vibrating bowl is fully functional without the PLC, the integrated bowl controller does not require PLC control. Operation Principle: Fasteners are filled in bulk into the bowl and are conveyed upwards via mechanical vibration (micro-throw principle). The vibrating bowl is switched on or off automatically depending on the fill level of the screw magazine. The screw is then fed with compressed air through a plastic tube to the downstream device. The feed pulse for each screw comes externally from the downstream device.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK144, Weber SK144 blade head, unused, brand new. Ksdpswk H D Rofx Af Noll New price at Weber: approx. €18,000!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, moč: 44,7 kW (60,78 KM), Tehnični podatki: Obratovalna višina: 900 mm Obratovalna širina: 1350 mm Kedpfx Afownw E Tj Njll Maks. debelina obdelovanca: 99 mm Min. debelina obdelovanca: 0,8 mm Dimenzije stroja: Teža: cca 4800 kg Širina: cca 2800 mm Dolžina: cca 3460 mm Višina: cca 2440 mm Stroj smo kupili leta 2020 in ga obnovili. Priložen je nov transportni trak.

Stanje: rabljeno, Leto izdelave: 2016, Parts of a screwdriving station, used only for trial operations. Consists of two screwdriving units that were mounted on a robot gripper. The system was used for screwing battery components. Year of manufacture: 2016. In recent years, the system was stored and later sold by Audi. The screws processed are approx. 72 mm in length, M6. Rexroth parts (each installed twice): - 0 608 720 039; i = 6.74; efficiency = 85% - 0 608 820 113; Type: 3DMC060; 60 Nm - 0 608 701 017; max 20,000 rpm; 3~ 0–230 V; max 14 A; 0.11 Nm/A - 0 608 810 021 Kedpfx Afswh Nu Tj Noll - 0608 810 037; Type 3ULG; i = 1; efficiency = 95% Weber: - 1x ZEL 360 feeder - 1x control unit as shown All items as pictured. Inspection is recommended, as it is unclear whether the system is complete.

Stanje: kot nova (razstavni stroj), Vsi deli, prikazani na sliki, so priloženi stroju. Kedpfografkex Af Nell

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1990, WEBER OFZ-2-1350 wide belt sander Klsdsgm Tqwspfx Af Njl working width: 1350 mm number of units: 2 1: calibrating roller with 18.5 kW motor 2: sanding pad unit with 11 kW motor adjustable sanding pad cleaning brush variable feed speed machine weight: 2700 kg

Stanje: rabljeno, Leto izdelave: 1990, Used Weber wide belt sander with 2 sanding belts, oscillating. Infinitely variable feed speed. Sanding width 900 mm. Suitable as a backup machine. Klsdowzlqkepfx Af Nel

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, delovna širina: 1.100 mm, skupna masa: 1.300 kg, širina obdelovanca (maks.): 600 mm, priključek za stisnjen zrak: 6 letvica, najv. debelina pločevine: 40 mm, število prejšnjih lastnikov: 1, vrsta nastavitve višine: električni, dolžina mize: 3.000 mm, višina mize: 850 mm, širina mize: 600 mm, trajanje garancije: 3 meseci, Mode of operation: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating instructions: 1x manual Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design, each with 6 tools, drive power 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (highly wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Klodsw U A Dmjpfx Af Nel Control voltage: 24 Volt DC Infinitely variable feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with start-up switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit locking, belts replaced – machine is fully operational and in very good technical condition. Set according to manufacturer’s specifications/standards. Sale includes a mechanical functional warranty of 3 months from delivery.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 39.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, A used and fully operational profile extrusion line, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Model: DS 7.22 Year of manufacture: 1995 Machine No.: DS70-043 Operating hours: 39,000 h Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Barrel heating/cooling zones: 5/3 (air cooling via fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional with digital temperature controllers Degassing: Rotary vane vacuum pump Busch (1.5 kW) Max. output: 120-150 kg/h for rigid PVC, depending on material Connected load: approx. 50 kW (without tooling) Special accessories: melt temperature probe and melt pressure sensor Adapter between extruder connection and extrusion die Used tooling set for a window profile (widening), consisting of: - Extrusion die for “widening”, incl. heating bands - Dry calibration unit - Vacuum tank approx. 2 m long, with 8 inserts for calibration disks - 16 calibration disks Vacuum calibration unit Manufacturer: Uniplast / Greiner Model: CAL VAK 4P Year of manufacture: 1992 Machine No.: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (each 4.3 kW) Water circulation pumps: 2 x Calpeda (each 1.1 kW) Kjdpfexu U Trsx Af Njll Caterpillar haul-off with integrated saw Manufacturer: Uniplast / Greiner Model: CAT PUL 2D Year of manufacture: 1992 Machine No.: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Max. haul-off force: approx. 25,000 N Speed range: up to approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tilting table Manufacturer: Ide Model: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The entire line was overhauled in 2020 and has only been in operation for 325 hours since then.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: bencin, skupna masa: 32 kg, Certificirano po DGUV do: 03/2026, Leto izdelave: 2018, številka stroja/vozila: 20008074, Oprema: UVV varnostni pregled, posebej za zbitje nasutja cevi v jarkih druga področja uporabe: zbitje robnih območij pri pločnikih; vgradnja drenaž Klsdpfx Asxpu Tbef Njl Zaradi majhne teže je enostavna, prilagodljiva in varna za upravljanje tudi na naklonih in v zelo omejenih prostorih.

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.200 mm, skupna širina: 1.300 mm, skupna višina: 1.800 mm, skupna masa: 450 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Strip skinning and cutting machine Brand: Weber Model: ASL 560 Serial number: 110 Year of manufacture: 2006 Voltage: 400 V, 50 Hz Power: 1.1 kW Weight: 450 kg Plastic conveyor belt Belt width: (1x) 500 mm, (1x) 300 mm 17 blades, blade spacing: 30 mm Kjdpfx Ajv Abylof Nell Overall dimensions: 2200 mm x 1300 mm x 1800 mm Includes additional parts and blades.

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), Line consists of WEBER CCS 902 slicer, WEBER CCA inserter, and a grinding machine with spare blades and spare parts. Klodpfx Aogmdr Uef Njl

Stanje: novo, A block-mounted sweeper broom KehrFix is being offered in various versions, ranging from 1.50 m to 4.00 m in width. A suitable mounting system needs to be discussed separately if required (e.g. pallet fork mount, bucket hook, or Euro mount). This block-mounted sweeper is designed for use with forklifts, wheel loaders, tractors, mini loaders, mini dumpers, and many other vehicles and machines! Equipped with a variety of mounting options for quick attachment to numerous vehicles, the KehrFix is the ideal solution for maintaining cleanliness over large areas. Klodpfsh T A Tnox Af Nol KehrFix push brooms are a professional choice for effortless and effective sweeping and cleaning. The robust KehrFix has been engineered to complete these tasks quickly and thoroughly across all conceivable application areas. KehrFix push brooms are high-quality, durable, maintenance-free, and universally applicable sweeping systems.

Stanje: novo, Leto izdelave: 2024, Facility managers and property management companies are well aware of the challenge: On collection day, when the refuse collection vehicle arrives, all bins must be positioned at the pick-up point. If waste containers are typically stored in the underground garage, the caretaker must transport every bin up the ramp. This process is time-consuming, physically demanding, or sometimes simply impossible for one person. A 240-liter waste bin filled with compacted paper can weigh over 200 kg, while a 1,100-liter waste container can exceed one ton. In such cases, the caretaker needs a second person’s assistance, which increases labor costs. Weber offers time- and health-saving solutions for this issue. Contact us about our bin frames for 1,100-liter waste containers and our trolley systems for 120- and 240-liter waste bins. And of course, we also supply battery-powered towing vehicles. - Health-friendly - Efficient - 400 kg payload - Galvanized Kljdpfxji Nnruj Af Njl - Interconnectable - Professional equipment – not suitable for public road traffic Adapters: - Ball hitch - Drawbar eye

Leto izdelave: 1991, obratovalne ure: 102.364 h, Stanje: dober (rabljeno), This extrusion line from Hans Weber GmbH is located at Plastima Used Machinery in their equipment storage. The line dates from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 Ksdpfsqpft Isx Af Nell - Year of manufacture: 1991 - Screw diameter: 65 mm - Operating hours: 2,364

Leto izdelave: 1997, obratovalne ure: 58.668 h, Stanje: dober (rabljeno), Deze extruder van WEBER bevindt zich in de machineopslag bij Plastima Used Machinery. De machine is uit 1997 en verkeert in uitstekende staat. Merk: Hans Weber GmbH Model: NE 7 042 Schroeftype: Enkele schroef Bouwjaar: 1997 Schroefdiameter: 75 mm L/D-verhouding: 30 Bedrijfsuren: 58.668 Aangesloten vermogen: 180 kW Afmetingen: 3800 x 1000 x 2100 mm Gewicht: 3.200 kg Overige kenmerken: • Extruder met gegroefde invoerzone • WEBER OS5 besturing & software (Siemens) • Besturingssysteem achteraf omgebouwd naar OS5 door een WEBER-technicus Kodpfx Afjtpg Dno Noll

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Out of production, has always operated with an 800 mm extrusion head for the manufacturing of HDPE pipes. Klodpfjwr Db Njx Af Njl

Leto izdelave: 1991, obratovalne ure: 32.000 h, Stanje: generalkompletno obnovljen (rabljeno), • Ein Paar originale WEBER-Schnecken (ausgezeichneter Zustand, einschließlich Messprotokoll) • Ein Paar nicht-originale Schnecken • Getriebe von WEBER geprüft und teilweise überholt • Steuerung auf WPS-Steuerung aufgerüstet Kljdpowaxuasfx Af Nel • Ausstoß auf PVC ca. 700 kg/Stunde

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Žaga za profile, rabljena Proizvajalec: Weber - Kronach Kodpfx Afew Up Rms Nell Tip: PS 2 Leto izdelave: 2002 Največji presek profila: 200 x 100 mm (Š x V) Premer žaginega lista: 400 mm Priključna moč: 5,0 kW Napetost: 400 V, 50 Hz Stanje: zelo dobro, tehnična laboratorijska naprava

Leto izdelave: 2005, Stanje: skoraj kot novo (rabljeno), WEBER MSG 460-5 Klodpfopcf Hiex Af Nel ID št. 2553 Weber MSG 460-5 brusilnik nožev za ostrenje krožnih rezil za rezalnike. Dimenzije: 55 x 60 cm, višina 75 cm.

Leto izdelave: 1997, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DS 70 087, WEBER DS 7.22 Dvojni polžasti ekstruder Kjdpfx Asxghz Hef Noll

Stanje: skoraj kot novo (rabljeno), Extruder pipe sections for Weber DS 10.22 Kljdpfx Afohlvm Ns Njl

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), WEBER 3-layer PVC foam core pipe extrusion line with: 2 WEBER DS 9.25 EXTRUDERS I Year of manufacture: 2004 WEBER DS 9.25 TWIN-SCREW EXTRUDER Year of manufacture: 2004 Application: PVC foam core pipe (three-layer) Only the extruders are for sale, without feedblock The screws and barrels of both extruders are in very good condition Kodpfst Rcn Njx Af Njll The equipment is in very good operational condition The equipment is my property Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Germany

Stanje: pripravljen za uporabo (rabljen), skupna dolžina: 2.050 mm, skupna širina: 850 mm, skupna višina: 1.350 mm, skupna masa: 300 kg, WEBER deburring machine. Type - ASB 1000 Belt dimensions: Length - 205 cm Width - 40 cm Infeed height - 90 cm Outfeed height - 113 cm Roller width - 48 cm Overall dimensions: Length - 205 cm Width - 85 cm Height - 135 cm Kledpfxorq Dmcs Af Nel Weight - 300 kg In good working condition.

Stanje: rabljeno, Nakladalni transporter Weber Klsdpfx Aoxtfz Rsf Nol Model CZB Nerjavno jeklo