Vzdrževanje Golf Course nakup rabljenega (2.215)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments Kedpfx Afju Aftgjqsdw >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current standards. Technical Data: - Heidenhain TNC 320 retrofit - Travel axes: X - 500 mm, Y - 380 mm, Z - 350 mm - Spindle taper: SK 40 - Vertical quill stroke: 50 mm - Spindle speed range: 20–3,150 rpm, stepless - Feed rate: 1–3,000 mm/min - Rapid traverse: 5 m/min - Table load capacity: 250 kg - Total power requirement: 11.3 kW - Machine weight: approx. 2 t - Handheld control unit - Safety enclosure Kjdsxw N S Iepfx Afqedw Inspection and test run under power on-site are of course possible. We are also happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and other renowned manufacturers. We are your partner! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us throughout the entire process.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 15 kg, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, 3D Coordinate Measuring Machine Mahr MS2VT Used multisensor CMM with motorized zoom and active vibration isolation Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2025. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and application support. Kdsdpfx Asdz Er Refqew Delivery available with factory service or via forwarding agent, worldwide. Online or on-site demonstrations with customer parts on request, application consulting by accredited Profitech measurement laboratories during the project phase. Complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and instructional programs available, including online courses. Rental, leasing, or financing possible directly through Profitech, no financial institution required. Measuring device can be individually configured to meet customer requirements. • Measuring range per individual sensor: 200x200x200mm • Dimensions: 900x750x950mm • Weight: approx. 170 kg • Accuracy: E2 = 2.4 + L/150 [µm] • Retrofit 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 analysis software (12 months free software updates) Manufacturer's sample image (sister device)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 3.478 h, nosilnost: 5.000 kg, dvižna višina: 5.980 mm, prosto dvigovanje: 1.888 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.800 mm, moč: 54 kW (73,42 KM), širina nosilnega okvirja vilic: 1.300 mm, dolžina vilic: 1.600 mm, lastna masa: 7.256 kg, skupna dolžina: 3.098 mm, vrsta pogona: Diesel, gradbena širina: 1.769 mm, Diesel Forklift Load Center: 500 mm Fork Width: 150 mm Fork Thickness: 50 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical Condition: Very good Kodpfx Afoxxd Hijqsdw Front Tyres Type: Superelastic Front Tyre Size: 7.00-15 Rear Tyres Type: Superelastic Rear Tyre Size: 250-15 Description: In addition to this unit, we also offer other forklifts and warehouse equipment. All our machines are workshop-inspected and certified according to FEM 4.004. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you don’t purchase a unit from us. Hire purchase & financing at attractive conditions are possible on request. We are happy to provide you with expert and detailed advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cab, full free lift, twin tyres, interior mirror, joystick, beacon, wiper, single-pedal, LED, seat,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Here we offer a very well-maintained, regularly serviced injection moulding machine. We are also interested in taking back well-kept machines from model year 2010 and newer as part exchange. Please offer us any surplus machines you may have coming available. Full maintenance by manufacturer up to the present Injection moulding machine Krauss Maffei KM65-160 C2 Injection moulding machine: Manufacturer / Type: Krauss Maffei KM65-160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 Full annual servicing carried out by manufacturer Kjdpfxoh Dp R Ej Afqodw Clamping unit: Clamping force: 650 kN / 65 tons Tie bar spacing: 405 x 405 mm Minimum mould height: 250 mm Max. platen opening: 750 mm Standard platen size: 610 x 610 mm Ejector stroke: 150 mm Core pull: 1 x unit Injection unit: Injection unit size / cylinder diameter: 160 / Cylinder Ø25 mm and cylinder Ø18 mm Max. shot weight (Ø25): 47 g/PS Injection flow rate: 63 cm³/sec Max. specific injection pressure: 2500 bar Handling interface: Euromap 12 Dosing unit interface: Yes Dimensions & Weights: Weight with control cabinet: 3.8 t Length: 3,800 mm Width (machine only): 1,050 mm Height: 1,890 mm Oil fill: 270 L Location: Hanover / Lower Saxony The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown in photos is NOT included in the offer! The machine is available for immediate delivery from our warehouse. Loaded free onto buyer's truck, or delivered free to address against reimbursement of shipping costs. About the machines and our company: - We only sell machines owned by us, acquired from ongoing production, from our Hanover warehouse - All machines offered are checked and tested prior to removal - We do NOT sell insolvency goods – we are NOT a broker trading in third-party assets - All offered machines come from successful companies where regular servicing and maintenance is a matter of course - All offered machines can be viewed at our warehouse

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 13.818 h, nosilnost: 2.330 kg, dvižna višina: 6.600 mm, prosto dvigovanje: 1.890 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.843 mm, lastna masa: 7.485 kg, vrsta pogona: Elektro, gradbena širina: 1.500 mm, Viličar s štirikratnim smerom vožnje Težišče obremenitve: 500 Tip droga: Triplex Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: zelo dobro Tip sprednjih pnevmatik: Bandage Tip zadnjih pnevmatik: Bandage Baterija: 48V Opis: Poleg tega modela Combilift imamo v naših skladiščih v Hamburgu in Gdansku še približno 200 težkih viličarjev, kompaktnih viličarjev, čelnih in bočnih viličarjev. Obiščite našo spletno stran - sago-online. Najem s kasnejšim odkupom in financiranje pod ugodnimi pogoji sta pri nas vedno mogoča. Z veseljem odkupimo tudi vaš rabljeni viličar, tudi če pri nas ne opravite nakupa. Naš lastnik gospod Peter Sawitzki vas z veseljem podrobno svetuje o tem modelu C3000CB. P.S.: Naša mojstrska delavnica je specializirana za popravila, vzdrževanje, prenovo in nadgradnjo viličarjev od 8 t. Z veseljem damo vaše vozilo tudi v komisijsko prodajo pri nas. Bočno pomikalo, naprava za nastavljanje vilic, teleskopske vilice, popoln prosti dvig, Kdedpfxoxx D Aws Afqsw

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard Kedpfx Ajvtp Edefqedw About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: novo, Discover the ultimate power and precision of our vertical turning lathe series. With its robust construction and proven technology, it delivers groundbreaking results for your machining projects. Experience the limitless possibilities of our CNC version and take your manufacturing to the next level. TECHNICAL MAIN DATA (CNC MODEL): Max. swing diameter mm: 1500/1800/2750/4000/5000 Max. turning diameter mm: 1250/1600/2500/4000/5000 Max. workpiece height mm: 1000/1600/2000/2000/2000 Spindle motor power kW: 30/37/55/75 Table diameter mm: 1000/1250/2250/3600/3600/4500 Max. table speed rpm: 500/400/120/63/63/50 STANDARD EQUIPMENT: Fanuc or Siemens controller, ZF gearbox, chip conveyor, lubrication unit, hydraulic system, machine guarding, air blow gun, three-color signal lamp, work light, chip trolley, foot pedal, standard tool holder. OPTIONAL EQUIPMENT: C-axis, tool magazine, linear scale, tool setting device, workpiece probe, electrical cabinet air conditioning, special tool holders, and more. For further technical details, please refer to the PDF file below. TECHNICAL MAIN DATA (CONVENTIONAL MACHINE): Faceplate diameter: 1000|1400|1800|2000|2300 mm Swing diameter: 1200|1600|2000|2300|2600 mm Turning height: 1000|1250|1400|1600|1500 mm Table speed: 6.3–200 | 5–160 | 3.2–100 | 5–160 | 2.5–80 m/min Gear steps: 16 Max. workpiece weight: 3.2|5|8|8|8 t Main motor, power: 22|30|37|37 kW Machine weight approx.: 9|14|18|23|21 t STANDARD EQUIPMENT: Tool holder: 5 positions; faceplate: with 4 jaw boxes; servomotors: for axis travel, and more. For further technical details, please refer to the PDF file below. Conventional vertical turning lathe with solid, proven technology—power and precision for machining heavy workpieces: - Optimally equipped — highly accessible with crane and forklift - Vertical support with 5-position tool holder and side support (optional) with separate feed for internal and external machining - Heavy-duty column design with wide, hardened guideways - Hydraulic clamping of the cross rail - Rigid guideway design gives the vertical ram outstanding stability and accuracy - The spindle runs in a high-precision double-row roller bearing and is adjustable - Driven via reduction gearbox for high torque and speed range from 2.5–80 rpm Kdjdpfx Aod I I Ilofqsw Warranty: 12 months on the machine Now with a 15% energy subsidy from BAFA when replacing an old machine! Take advantage of the attractive leasing and hire-purchase terms from our financing partners. Contact us for details. Of course, we also offer delivery free to your premises, installation/commissioning, handover ready for operation, and operator training on the control system. The listed special net price refers to the smallest model of the conventional series. Images show both CNC variants and a conventional version.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 12 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 250 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 20 kg, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 250 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, obremenitev mize: 20 kg, leto zadnje generalne obnove: 2025, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, High-precision optical measuring device with active vibration damping for shop floor applications. Complete acceptance inspection before delivery, including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate measurement start! Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery with factory service or via freight forwarding, worldwide. On-site or online demonstrations with customer parts available; application-specific consulting by accredited Profitech metrology laboratories during project planning. Full-service package: – Delivery, assembly, commissioning, accuracy inspection according to norms, certification, and detailed acceptance documentation. Customized training and instruction programs also available as online courses. Kdedpfxsdzzqwe Afqsw Rental, hire-purchase, or financing directly through Profitech, without a financial institution. Measuring device can be individually configured to meet customer requirements. Measuring range single sensor: 250x200x200mm Measuring range all sensors: 250x200x200mm Factory refurbishment (Mahr Competence Center): 2024 New Windows 10 evaluation workstation Software: OptiCheck3D Version 4.5 Ultimate Maximum workpiece weight (glass plate): 15kg Scale resolution: 0.1μm Maximum speed: 150mm/s Dimensions: 800x700x1980mm Measuring device weight: 450kg Controller weight: 90kg High-precision CMOS camera for digital measurements Renishaw TP20 touch probe system with SF module Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1=1.9 + L/200; U2=2.4 + L/150 #### Example image from manufacturer ####

Stanje: rabljeno, Leto izdelave: 2018, Avtomatski etiketirni stroj, podajalnik etiket Macro SP12 desni RA1956 Proizvajalec: Schwinn Model: Macro SP 12 Leto izdelave: 2018 Usmeritev: desna Prehod etikete: do 115 mm Hitrost etiketiranja: 1–18 m/min Največji premer koluta z etiketami: 300 mm Premer tulca 40 mm z adapterjem prilagodljiv Priključek: euro vtič 230/50Hz Integrirano krmiljenje z nastavitvenimi parametri, upravljalnimi vhodi in izhodi, signalizacijo napak, ... Dodatna oprema: Zunanji zagon AP 010-500 vakuumski aplikatorski modul Kombinacija za vzdrževanje in upravljanje Kedpfx Afsk Abm Aoqsdw Adapter za tulec AP 031 predhodno opozorilo – zaloga etiket Montažni okvir Nadzorna omarica Opozorilna luč, 3-stopenjska

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, skupna dolžina: 9.000 mm, skupna širina: 1.200 mm, skupna višina: 2.000 mm, priključek za stisnjen zrak: 5 letvica, vrsta vhodnega toka: trifazni, širina transportnega traku: 1.000 mm, vrsta nastavitve višine: električni, višina izdelka (maks.): 1.200 mm, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 12 kW (16,32 KM), moč: 12 kW (16,32 KM), Oprema: dokumentacija / priročnik, Na voljo so visokokakovostna in večnamenska čistilna sredstva, ki skupaj z inovativnimi orodji omogočajo optimizirane rezultate čiščenja. Gre za rezultat intenzivnega razvoja v podjetju. Ugodno financiranje z nizko obrestno mero. SpeedLine 2 je pretočni sistem, v katerem je mogoče sitotiskarske šablone oprati (odstraniti tiskarsko barvo) v enem neprekinjenem delovnem ciklu. Šablone z ostanki barve se postavijo na transportni trak dovajalne postaje, nato pa so nadaljnji postopki pranja in odstranjevanja barve popolnoma avtomatsko vodeni s prednastavljenimi parametri. V vsakodnevni praksi to pomeni: - Brez ščetke = nežno čiščenje - Modularna zasnova - Izjemno enostavno upravljanje - Brez zapletenega programiranja = ni potrebnega strokovnega znanja - Robusten, inteligenten sistem - Nizko vzdrževanje - Zmanjšan volumen polnjenja = dnevni prihranek stroškov - Optimiziran čistilni rezultat - Popolna tehnologija Zentner Systems - Uporaba okolju prijaznih kemikalij Popolnoma samostojno delujoči posamezni moduli so integrirani in povezani v sistem SpeedLine. Modularna zasnova naprave omogoča, denimo, prilagoditev kapaciteti. To omogoča fleksibilnost, uporabo obstoječih investicij in prilagajanje trenutnim zahtevam. Kedpfxoxuicbj Afqedw Standardna izvedba SpeedLine vključuje naslednje module: - Dovajalni modul - Modul za pranje barve - Ekstrakcijski modul - Izpirni modul - Odvzemni modul Krmilna plošča je kompaktna in omogoča vklop ter izklop posameznih modulov. Upravljanje je enostavno in uporabniku prijazno. SpeedLine je na voljo v treh standardnih modelih: Model 10 za maks. višino okvirja šablone 1000 mm Model 12 za maks. višino okvirja šablone 1200 mm Model 16 za maks. višino okvirja šablone 1600 mm Model 22 za maks. višino okvirja šablone 2200 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, NOW: Clearance Sale of Lathes (demonstration machines, display models, and training workshop machines). We are offering various lathes with low operating hours that have been used either during our demonstration days or in one of our lathe course rooms. You will receive the full warranty. All lathes come complete with drive center, revolving center, faceplate (or other basic accessories), and operating manual. You can find more details and technical specifications about the machine types on our website! Shipping available upon request! Available machines: * Drechselmeister Miditec FU 175 SET €999 incl. VAT (€832.50 excl. VAT) * Drechselmeister MIDI 1 Table Lathe €880 incl. VAT (€733.33 excl. VAT) * Drechselmeister MIDI 2 PLUS Table Lathe €1,099 incl. VAT (€915.83 excl. VAT) * Drechselmeister TWISTER FU-200 Lathe €2,293 incl. VAT (€1,910.83 excl. VAT) * Drechselmeister STRATOS FU-230 Lathe €2,633 incl. VAT (€2,194.17 excl. VAT) * Drechselmeister STRATOS FU-230 LV Lathe €2,845 incl. VAT (€2,370.83 excl. VAT) * Drechselmeister TWISTER XL Lathe €3,398 incl. VAT (€2,831.67 excl. VAT) * Drechselmeister STRATOS XL Lathe €4,248 incl. VAT (€3,540 excl. VAT) * Teknatool NOVA NEBULA 230 DVR Lathe €2,590 incl. VAT (€2,158.33 excl. VAT) * Teknatool NOVA Galaxy DVR Lathe €1,990 incl. VAT (€1,658.33 excl. VAT) * RECORD POWER Lathe DML 250 €280 incl. VAT (€233.33 excl. VAT) * RECORD POWER Lathe CORONET ENVOY €1,799 incl. VAT (€1,499.17 excl. VAT) * RECORD POWER Lathe Coronet Herald SET €1,079 incl. VAT (€899.17 excl. VAT) * HAGER Lathe STAR 200 MAX SET €2,890 incl. VAT (€2,408.33 excl. VAT) * HAGER Lathe HDG 250L €3,990 incl. VAT (€3,325 excl. VAT) * HAGER Lathe HDE300 €4,680 incl. VAT (€3,900 excl. VAT) Kjdpjwyn Dkjfx Afqedw All machines are located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, turning machine, wood lathe, woodturning, turning tools, woodturning machine, machine Reference: R-A0117

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Specifications: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitch from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Features: >> New collet chuck system, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: Kodpfjwkh Abex Afqedw For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in excellent condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and enables ground-finish surfaces to be produced. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 2023, obratovalne ure: 60 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor "kavljaste dvigalo" Kedpfxjvrw Tmj Afqsdw - 24 V električno upravljanje - motorni prostor, enostaven za vzdrževanje, z LED osvetlitvijo - zložni lijak s senzorjem poti in avtomatskim upravljanjem - hidravlično reverzibilen ventilator - zvočno opozorilo za zagon - Barvanje: RAL 2011 temno oranžna Dodatna oprema: Kavljasto dvigalo po DIN 30722-1 (Nemčija) Sistem za drobljenje velikosti L (8 zob) Trifazni motor 200 kW – EUROPA + električna črpalka Velika radijska enota za kavljasto dvigalo Zadnji trak 6,9 m Okvir za nadtrakasti magnet Nadtrakasti magnet Dodaten hidravlični priključek 70 l/min

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.000 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 350 mm, teža obdelovanca (maks.): 50 kg, trajanje garancije: 12 meseci, skupna višina: 1.950 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 1.900 mm, skupna dolžina: 2.020 mm, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 350 mm, skupna masa: 5.800 kg, vhodna napetost: 230 V, priključek za stisnjen zrak: 6 letvica, leto zadnje generalne obnove: 2025, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Reference Measuring Device: Mahr OMS 1000 Multisensor The all-round measuring device for the widest range of parts and pallet measurements Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Includes latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery by factory service or shipping company, worldwide. Online or optional on-site demonstrations with customer parts, application consulting by accredited Profitech metrology labs during project planning. Complete service available: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification and extensive acceptance documentation. Custom training programs, also available as online courses. Rental, lease-purchase, or financing available directly through Profitech, no financial institution required. Measuring device can be individually configured to customer requirements. Measuring Accuracy: E1= 1.3 + L / 400µm E2= 0.9 + L / 600µm E3= 2.2 + L / 300µm Kdodpfx Afsxbpgteqew Measuring area: approx. 1000x1000x350mm Including optical sensor (camera & laser) Renishaw TP200 touch probe system incl. standard force module CNC control with hand control panel 27-inch flat screen monitor Evaluation station with Windows 10 OS (Windows 11 available upon request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) for measurements close to production Optical Sensor: • Pure gray scale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled image saving • Multifunctional multi-window technology • White, telecentric transmitted light • Coaxial incident light • 3D multisensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity adjustment to suit different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic illustration of the program structure • Multitasking enables parallel measuring and evaluation • Powerful base editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit, and circumscribed), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness deviation, total flatness deviation • Maximum Material Condition (MMC) • Current tolerance tables of common DIN standards • Software module for generating custom plant tolerance tables

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 014150, Leto izdelave: 2020, obratovalne ure: 475 h, nosilnost: 2.000 kg, dvižna višina: 3.150 mm, prosto dvigovanje: 150 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 2.196 mm, vrsta pogona: Elektro, Električni 3-kolesni viličar Številka šasije: 014150 Težišče: 500 mm ISO razred: ISO razred 2 = 1.000 - 2.500 kg Tip droga: Standard Tehnično stanje: dobro Tip pnevmatik spredaj: superelastične Tip pnevmatik zadaj: superelastične Napetost baterije: 48V Kapaciteta baterije: 690Ah Tip baterije: PzS Letnik baterije: 2020 Opis: Najdite svoj viličar pri STA-TECH! Paletni viličar, električni, dizelski ali plinski viličar – ponujamo cenovno ugodne, pripravljene modele ter nove viličarje. STA-TECH je vaš partner za: ● Nakup in najem viličarjev ter skladiščne tehnike ● Odkup rabljenih naprav in logistiko ● Servis vseh proizvajalcev: popravilo, vzdrževanje, preizkusi Stranski pomik, 3. ventil, 4. ventil, delovna luč zadaj, delovna luč spredaj, rotacijska luč, Kdsdpjxulrrsfx Afqjw

Stanje: rabljeno, prevoženi kilometri: 607.500 km, moč: 235 kW (319,51 KM), prva registracija: 01/2014, vrsta goriva: dizel, število sedežev: 45, emisijski razred: Euro 5, barva: bela, zavore: retarder, Oprema: ABS, klimatska naprava, parkirni grelec, * MAN A 20 * Lion's City Ü * First registered: 2014 * From second German owner * Complete repair history available from 12/2019! * 235 kW / EURO 5 - EEV Kdodpfoxc Ax Sjx Afqjw * Retarder * Air conditioning system * Trailer coupling * Various opening windows * Video surveillance system installed * Double glazing * Convector heating * 95 km/h * Excerpt from repair history: * All work carried out externally in authorized specialist workshops – invoices are, of course, available! * Major oil change carried out at 604,526 km (30.06.2025); at 604,525 km – solenoid valve for second axle (right side) replaced, * 17.05.25 – steering damper replaced front axle (right), water pump replaced, brake caliper rear axle (right), coolant radiator, * Invoice for €10,200 from MAN/Neoplan authorized workshop dated 10/2024 including replacement of shock absorbers (front axle), air suspension bellows (front axle left and right), renewal of rolling bellows (front axle left and right), transmission oil, ... * Invoice for €4,554 for new combination cylinder, combustion chamber, heat exchanger, environmental pump, ... * Brake line for front axle renewed, compressor and power steering pump re-sealed, * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may still be in use / mileage and condition subject to change * All information provided without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws Kdjdpsvkfhpsfx Afqew • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 12 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 15 kg, trajanje garancije: 12 meseci, skupna višina: 2.000 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 1.000 mm, skupna dolžina: 800 mm, skupna masa: 800 kg, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Mahr Multiscope 400 Multisensor Measuring System equipped with camera and Renishaw touch probe system Fully functional, with factory acceptance before delivery! Complete maintenance history Measuring range: 400x200x200mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000mm Maximum travel speed: 150 mm/s Kdedow Slafepfx Afqjw Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L=measurement length in mm) Factory-refurbished premium multisensor measuring center with guarantee and warranty, rebuilt in 2025. Includes latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 optionally available), including free lifetime software hotline and user support. Optional: Delivery with factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and optional on-site demonstrations with customer parts, application engineering consultation by accredited Profitech measurement laboratories during project planning. Available full-service package: – Delivery, installation, commissioning, accuracy acceptance in accordance with standards, certification, and comprehensive acceptance documentation. Customized training programs available, also bookable as online courses. Creation of measuring programs for direct operation with the measuring system is also possible. Rental, hire-purchase, or financing directly via Profitech – no financial institution required. Measuring system can be individually configured according to customer requirements (within the EU). Reference number: 01814-1-ms400 (please always quote in inquiries)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: Kjdpfx Ajvivmyefqodw >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear cover >> Machine feet Ksdpfx Afexcuazeqodw Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 – Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threads: Metric, Imperial, Module, and Diametral-Pitch possible >> Metric thread pitches: 0.18 to 28 mm >> Weight approx. 1100 kg Kodpfewrmuxox Afqodw >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Features: >> NEW 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter function, quick zeroing, counting direction reversal >> 1 x 160 mm 3-jaw chuck NEW, 2 sets of jaws >> 1 x 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely dismantled and newly repainted. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more accurate. The machine has been electrically and mechanically tested in our facility. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility. Kedpew Nw Dqsfx Afqjdw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1983, Machine No. 83-067 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1,100 kg Kedpfowb Supsx Afqedw >> Spindle brake, selectable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Scope of Delivery and Accessories: >> NEW 3-axis digital readout by K&C, 12-month manufacturer’s warranty, complete with manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference marker, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 pcs 3-jaw chuck NEW 160 mm, 2 sets of jaws >> NEW collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 holders >> Electronic spindle protection >> Rear guard >> Coolant system >> Machine feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been both electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power at our site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 pcs. collets, some duplicates >> Multifix size B with 3 tool holders Kjdpfxexu Hlao Afqedw >> Bed stop >> Machine mounts >> Drill chuck >> Live center For safety: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, year 1988, in very good condition. Of course, the machine is fully functional. The lead and feed screws are equipped with protective covers for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our facility.