Vrtanje nakup rabljenega (1.288)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 500 mm, MAIN MOVEMENTS Maximum drilling depth – Z-axis: 500 mm Table longitudinal travel – X-axis: 300 mm Table vertical travel – Y-axis: 300 mm Drilling slide, workpiece holder – W-axis: 50 mm DRILL SPINDLE Drilling diameter without pre-drilling, optimal: 3 – 12 mm Distance between drills: 250 mm Drill spindle speed, min – max: 0 – 6,000 rpm Drill spindle motor power: 7.5 kW (S1) Gun drill holder, for diameter less than 6 mm: Ø 10 x 40 mm Gun drill holder, for diameter greater than 6 mm: Ø 25 x 70 mm CLAMPING PLATE Lrodpfou Au Dujx Akheu Fixed clamping plate, surface dimensions: 500 x 600 mm Maximum load capacity of fixed plate: 1,000 kg Standard T-slots for clamping devices: 18 mm OIL Cutting oil flow rate: 50 l/min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 l Adjustable temperature: 27°–30°C DIMENSIONS AND WEIGHT Width x length: 4,450 x 3,000 mm Approximate weight: 2,210 kg POWER SUPPLY Power supply: 400 V/3-phase/50–60 Hz Compressed air: 6 bar Total installed power: 25 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 351.10.001.16, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 3.000 mm, širina obdelovanca (maks.): 920 mm, višina obdelovanca (maks.): 50 mm, globina vrtanja: 55 mm, TECHNICAL DETAILS Maximum drilling depth, horizontal: 30 mm Maximum drilling depth, vertical: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Distance between horizontal spindles: 32 mm Distance between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindle: 8 x 15 mm, 1 x 35 mm Workpiece dimensions X-axis: 280 – 3,000 mm Workpiece dimensions Y-axis: 180 – 920 mm Workpiece dimensions Z-axis: 10 – 50 mm Travel speed X-axis: 25 m/min Travel speed Y-axis: 25 m/min Travel speed Z-axis: 15 m/min Drill head motor power: 1.5 kW Drill head speed: 3,600 rpm Circular saw unit speed: 9,000 rpm Milling spindle speed: 24,000 rpm Maximum circular saw blade diameter: 100 mm MACHINE DETAILS Operating / ambient temperature: 15 – 40 °C Relative humidity: max. 90% at 20 °C Operating pressure: 6 – 8 bar Nominal compressed air consumption: 60 Nl/min Air consumption: 1,650 m³/h Ljdpozcdkwefx Akheru Compressed air supply diameter: 5/8" Internal diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables

Stanje: rabljeno, Leto izdelave: 1989, z mnogimi svedri rabljeno, vrhunsko stanje Stroj očiščen, delno obnovljen, namazan, usposobljen, preizkus delovanja, Znamka Hoffmann Tip DB 23 Leto izdelave 1989 Ledpsvyurcjfx Akhsru Št. stroja 169 Število vreten 23 kosov Število vrtalnih letev 1 Razmak vreten / mreža 32 mm Vrtanje od spodaj, hod 60 mm Omejevalni letvi z centralnim nastavljanjem Delovna širina 704 mm (1080 – portalni prehod) Vrtalna globina 70 mm vodoravno Vpenjanje svedra M10 / stožec 30° Prostor potreb. cca 1300 mm x 1000 mm x 1300 mm Teža cca 500 kg Lokacija skladišča 97447 Gerolzhofen, naloženo, nepakirano Predaja v dejanskem stanju, kot je bilo ogledano, brez garancije in jamstva.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Ljdpfx Aksv Npw Eehoru air connection 6 bar fully automatic pneumatic control with foot pedal additional switch for "chip removal" program T-drilling head with 7+2 drilling spindles, 32 mm pitch drill shank diameter 10 mm swivable 90°, with locking mechanism undercarriage

Stanje: novo, with quick-lift system - NEW - Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 160 mm 2-speed motor 1400/2800 rpm instead of 2.2 kW Motor speed: 2800 rpm Drill chuck mount: 20 mm Table size: 600 mm x 320 mm Actuator system: 1 eccentric Lodpfxevwfr Is Akhoru Weight: 246 kg Article no. 300015 Including accessories: 1 piece 2-speed motor 1400/2800 rpm instead of 2.2 kW No. A250070 1 piece 90° stop No. A350128 1 piece horizontal drilling indexing system with 4 hole patterns 16, 20, 22, 25 mm Bowden cable operation No. A300255 1 piece eccentric actuator with column and clamping cross No. A250055

Stanje: rabljeno, Leto izdelave: 1980, used Ljdovwfuvepfx Akhoru Manufacturer: Scheer Model: DB 5 Year of manufacture: 1980 Machine No.: 508054 Number of spindles: 21 Number of drilling beams: 1 Drilling from below Manually swiveling Working width: 800 mm Drilling depth: 80 mm Number of clamps: 2 Grid: 32 mm Required space (LxWxH): approx. 1200 x 800 x 1300 mm Weight: approx. 300 kg Total connected load: 2.2 kW Location: 97447 Gerolzhofen Delivery in as-inspected condition - free on truck -

Stanje: rabljeno, Leto izdelave: 1977, rabljeno Proizvajalec: Ayen Tip: DB 100 K23 Leto izdelave: 1977 Št. stroja: 751212 Število vreten: 23 kos Število vrtalnih nosilcev: 1 Vrtanje od zgoraj gugalno pnevmatično hidravlična zavoro podajanja Vpenjalo za sveder D 10 mm Vpenjala: 3 kosi Raster: 32 mm Potrebni prostor pribl. (D x Š x V) mm 1200 x 800 x 1600 Teža pribl. 370 kg Skupna priključna moč: 2,2 kW Skladišče: 97447 Gerolzhofen Lrjdpfxsvwgagj Akheu Predaja v stanju, kot je bilo ogledano - prosto naloženo -

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 1300x1100x1350 mm Gewicht 500 kg Gesamtleistungsbedarf 3,5 kW Dübelbohrmaschine BOHRMAX 21 DUO - Vertikales Bohraggregat mit 21 Spindeln, von oben bohrend - Horizontales Bohraggregat mit 21 Spindeln schwenkbar 0°- 45°- 90° zum stirn- und flächenseitigen Bohren - Spindelabstand 32 mm - 4 Pneumatikspanner - wegschwenkbare Seitenanschläge - Fußpedal zum Spannen – Bohren – Lösen Lsdevz Eizspfx Akhsru - Abstand von erster zur letzten Spindel 640 mm - Max. Bohrtiefe 50 mm - Spindeldrehzahl 2800 U/min - Max. Werkstückdicke 80 mm - Tischgröße 870 x 550 mm - Inkl. 3 m Anschlaglineal mit 2 Klappanschlägen für Lochreihenbohrung - Druckluftanschluss 6 bar - Motorleistung 2 x 1,5 kW - Spannung 400 V / 50 Hz - Verpackungsgröße L=1300, B=1100, H=1350 mm - Gewicht 500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 5000 x 2250 x 1650 mm Weight: 2600 kg Total power requirement: 11.8 kW Dowel line boring machine BORINGMAX 6-XL - Max. workpiece size/boring distance: L = 2600 mm, W = 672 mm - Min. workpiece size/boring distance: L = 200 mm, W = 32 mm - 2 horizontal boring units with 22 spindles, 32 mm pitch for end face drilling - 4 vertical supports from below with 8 boring units each with 11 spindles, 32 mm pitch for face drilling, rotatable 45° - Boring units with quick-change chucks, shank holder diameter 10 mm - Max. drill diameter horizontal: 13 mm - Max. drill diameter vertical: 35 mm - Drilling depth horizontal: 0 - 60 mm - Drilling depth vertical: 0 - 60 mm - Spindle speed: 2840 rpm - Total output: 11.8 kW / 400 V, 50 Hz - Working height: 950 mm - Adjustment of the vertical boring units via digital position counter, 0.1 mm accuracy - Movement of the vertical boring units via linear guides with pneumatic locking - 8 vertical pneumatic clamps - Pneumatic control by foot valve - SIEMENS / DELTA PLC control system - Suitable for single or continuous operation - Safety emergency stop cord Lrodpfx Aksvz Elieheu - CE conformity - Operating pressure: 6 bar - Dimensions L = 5000, W = 2250, H = 1650 mm - Weight: 2600 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 3900 x 2500 x 1760 mm Weight: 1,800 kg Total power requirement: 6 kW Dowel and line boring machine BORINGMAX H1-V3+6 - Working area: 2,450 x 640 mm - 1st drilling unit with 20 spindles, 32 mm pitch for horizontal drilling - 2nd drilling unit with 2 x 10 spindles, 32 mm pitch for vertical drilling, 90° rotatable - 3rd drilling unit with 2 x 10 spindles, 32 mm pitch for vertical drilling, 90° rotatable - 4th drilling unit with 2 x 10 spindles, 32 mm pitch for vertical drilling, 90° rotatable - Max. workpiece thickness: 78 mm - Max. drilling depth, vertical drilling unit: 70 mm - Max. drilling depth, horizontal drilling unit: 40 mm - Spindle speed: 2,800 rpm - Motor output, horizontal drilling unit: 1.5 kW - Motor output, vertical drilling unit: 1.5 kW - Total power: 6.0 kW - Voltage: 400 V / 50 Hz - Vertical drilling units adjustable on linear guides - Pneumatic connection: 8 bar - 8 pneumatic clamps - Pneumatic control via foot pedal - PLC control with user-friendly touchscreen interface - Safety pull-cord - Dimensions: L=3900, W=2500, H=1760 mm - Weight: 1,800 kg Lodpfovz Eq Ejx Akheru

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 1050x1050x110 mm Teža 350 kg Skupna potrebna moč 1,5 kW Universalna čepilna vrtalna naprava BOHRMAX 21 ECO - 21 vreten - Razmak med vreteni 32 mm - Maks. globina vrtanja 50 mm - Maks. debelina obdelovanca 80 mm - Premer stebla svedra 10 mm - Vrtalna enota 0°- 45°- 90° pnevmatsko nagibna za čelno in površinsko vrtanje - 2 pnevmatski vpenjalci - Nožna pedala za vpenjanje, vrtanje, sproščanje - Razdalja od prvega do zadnjega vretena 640 mm - Merilo za vrstno vrtanje 3000 mm z zložljivim ustavljalcem - Hitrost vrtenja vretena 2850 vrt/min - Velikost mize 870 x 550 mm - Moč motorja 1,5 kW / 400 V - Napetost 400V / 50 Hz - Pnevmatski priključek 6 - 8 bar - Dimenzije D = 1050 mm, Š = 1050 mm, V = 110 mm - Teža 350 kg Ljdpfx Aksvz Er Aohoru

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 2800x1100x2200 mm Gewicht 1100 kg Gesamtleistungsbedarf 8,8 kW Bohrmaschine horizontal und vertikal MULTI MZ3x8 - Max. Mittenabstand zwischen den Löchern 2440(L)mm x 300(B) mm - Min. Mittenabstand zwischen den Löchern 220(L)mm x 32(B) mm - Max. Bearbeitungslänge 2440 mm - Min. Bearbeitungslänge 220 mm - Plattenstärke 12~40 mm - Gesamtzahl der Bohrer 32 Stk. Lrsdpsvz Hwaofx Akhju - Horizontale Bohrreihen auf der Rückseite 4 Reihen - Max. Bohrdurchmesser 35 mm (Einzelbohrer) und 13 mm (Multi) - Max. Bohrtiefe 50 mm - Durchmesser des Bohrerschafts 10 mm - Länge der Bohrkrone 57 mm/70 mm - Drehzahl der Bohrkrone 2840 U/min - Anzahl der horizontalen L&R-Bohrreihen 2 Reihen - Anzahl der vertikalen Up-Bohrreihen 2 Reihen - Luftdruck 0,5~0,6 MPa - Gesamtleistung 8,8 kW - Nettogewicht 1100 kg - Gesamtabmessungen 2800 x 1100 x 2200 mm

Stanje: novo, Leto izdelave: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016 Vario bench drill is a compact and functional pillar drill for metal, designed for precise drilling operations in professional and workshop applications. With stepless speed adjustment, a robust construction, and versatile standard equipment, this model delivers maximum control over the drilling process and high work efficiency. Key Advantages of the Machine • Stepless speed regulation – range from 440–2600 rpm allows optimal adaptation to the material being processed. • Robust cast iron construction – provides high rigidity and reduces vibrations during operation. • Worktable with height and angle adjustment – tiltable from -45° to +45° and height-adjustable via rack and pinion. • Laser indicator and LED lighting – ensure maximum drilling precision and operator comfort. • Electronic speed display – enables full parameter control in real time. • 65 mm vice included – machine ready to use straight after unpacking. Design and Technology The Z7016A Vario metal bench drill is built on a sturdy column with a 60 mm diameter and a rigid cast iron base of 345 × 210 mm. The machine body and worktable are made from precisely machined castings. The MT2 taper allows for a wide range of tool mounting, and a spindle travel of 60 mm enables drilling of deep holes. The total height of the machine is just 870 mm, making it an extremely ergonomic and portable unit. Precision and Work Efficiency Thanks to its 500 W (S1) and 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill enables effective drilling in metal up to 16 mm in diameter. There is no need to change gears – the infinitely variable speed control significantly shortens machine setup times. The ergonomic three-arm feed lever, depth gauge, and spindle guidance system provide high repeatability and accuracy of holes. Applications The Z7016A Vario model is a bench drill for metal recommended for: • locksmith and service workshops • maintenance departments • technical schools • small production lines and prototyping facilities Standard Equipment • 65 mm vice Lrodpfxexbzuve Akheu • Laser drilling indicator • LED work area lighting • Electronic speed display • Three-arm feed lever • Tilting table with rack-and-pinion height adjustment Technical Data Parameter Value Max. drilling diameter 16 mm Speed range 440 – 2600 rpm Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg

Stanje: rabljeno, Leto izdelave: 2017, Število vrtalnih vreten: 21 kos Razmak: 32 mm Vpenjanje svedra: vpenjalna površina stebla svedra: 10 mm Upravljanje: nožni pedal Orodja: da Smer vrtanja: od spodaj in čelno Zasuk: ročno Ljdpfxjihghro Akhjru Kot zasuka: samo 0° ali 90° Maks. višina prehoda: 80 mm Maks. širina prehoda: 750 mm Število vpenjalcev materiala: 3 kos Vrsta vpenjanja materiala: pnevmatsko Izvedba: stacionarno Sistem zaustavitev: samo za konstrukcijsko serijo Teža približno: 400 kg Moč motorja: 1,5 kW Premer odsesovalnega priključka: 120 mm Skladiščna lokacija: pri stranki

Stanje: dober (rabljeno), Gillardon GSB 20 Column Drilling Machine Lredpom Sg S Nefx Akhju Drilling capacity in steel (diameter): 20 mm Throat depth: 260 mm Quill stroke: 115 mm

Stanje: dober (rabljeno), Drilling machine, pedestal drill, column drill - Manufacturer: Cordia, Column Drill Type S 26 - Motor power: 1000 W - Speeds: 95 - 1450 rpm, 6 steps - Table size: 320 x 270 mm, travel distance 500 mm - Spindle mounting: MT3 Lsdpfelx Nvnsx Akhoru - Spindle stroke: 100 mm - Throat: 280 mm - Column diameter: 120 mm - Accessories: incl. lighting and additionally mounted vice, see photos - Dimensions: 700/760/H1950 mm - Weight: 325 kg

Stanje: rabljeno, Drilling machine, pillar drill, upright drill press, column drill press - Condition: Fully functional - Note: Clamping table has been repair-welded, see pictures - Manufacturer: Flott, column drill type SB 15 - Spindle taper: MT2 - Motor: 0.525 kW - Speed adjustment: via V-belt - Speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm - Table size: 220 x 220 mm - Spindle taper: MT2 with drill chuck - Travel: 360 mm - Quill stroke: 55 mm - Throat: 295 mm - Column Ø: 100 mm - Accessories: Coolant drip tray - Dimensions: 930/700/H1805 mm - Weight: 190 kg Lodpsfv Unvsfx Akheru - Delivery: as is, as inspected

Stanje: dober (rabljeno), Counterbores, Twist Drills, Drills Lrsdperqinqofx Akhou - Manufacturer: Maysso / Ilix, 4 pcs twist drills, diameter 24–26.5 mm - Type: Two-flute, Morse taper shank MK3 - Size: 1 piece each Ø 24 / 25.5 / 26 / 26.5 mm - Price/offer: only as a complete set - On request: various sizes/quantities from additional stock available - Transport dimensions: 290 x 100 x H30 mm - Weight: 2.5 kg

Stanje: novo, Leto izdelave: 2026, Namizna vrtalna naprava CORMAK Z7016 Vario je kompaktna in funkcionalna stebrična vrtalna naprava za kovine, zasnovana za natančne vrtalne operacije v profesionalnih in delavničnih okoljih. Zahvaljujoč brezstopenjski regulaciji vrtljajev, robustni konstrukciji in vsestranski opremi ta model zagotavlja maksimalni nadzor nad procesom vrtanja in visoko delovno učinkovitost. Glavne prednosti stroja: * Brezstopenjska regulacija hitrosti – območje od 350 do 2400 vrt/min omogoča optimalno prilagoditev obdelovanemu materialu. * Robustna, litinska konstrukcija – zagotavlja visoko togost in zmanjšuje vibracije med delovanjem. * Delovna miza z nastavljivo višino in naklonom – nagibna v območju od -45° do +45° ter z nastavljivo višino z zobniškim mehanizmom. * Laserski kazalnik in LED osvetlitev – zagotavljata maksimalno natančnost vrtanja in udobje pri uporabi. * Elektronski prikazovalnik hitrosti – omogoča popoln nadzor nad parametri v realnem času. * 65 mm primež v kompletu – stroj je pripravljen za uporabo takoj po razpakiranju. Konstrukcija in tehnologija: Lrodpfxjrif H Ej Akhju Namizna vrtalna naprava za kovine Z7016 Vario je zgrajena na robustni stebri z 60 mm premera in trdni, litinski podlagi 400 × 232 mm. Ohišje stroja in delovna miza sta izdelana iz natančno obdelanih litin. Stožčasta vpenjalna glava MK2 omogoča namestitev orodij v širokem območju, 90 mm hod vretena pa omogoča obdelavo globokih lukenj. Skupna višina stroja je le 910 mm, kar ga naredi izjemno ergonomičen in mobilen. Natančnost in učinkovitost: Z motorjem moči 550 W (S1) in 700 W (S6) stebrična vrtalna naprava CORMAK Z7016 Vario omogoča učinkovito vrtanje kovin do premera 16 mm. Ni potrebe po spreminjanju prestav – zahvaljujoč brezstopenjski regulaciji hitrosti se čas priprave stroja znatno skrajša. Ergonomska ročica s tremi kraki, indikator globine in sistem vodenja vretena zagotavljajo visoko ponovljivost in natančnost lukenj. Uporaba: Model Z7016 Vario je namizna vrtalna naprava za kovine, priporočljiva za: * tesarske in servisne delavnice, * oddele za vzdrževanje, * tehnične šole, * male proizvodne linije in prototipne delavnice. Standardna oprema: * 65 mm primež * Laserski kazalnik vrtanja * LED osvetlitev delovnega prostora * Elektronski prikazovalnik hitrosti * Ročica s tremi kraki za pomik * Nagibna miza z nastavljivo višino z zobniškim mehanizmom Tehnični podatki: | Parameter | Vrednost | | :----- | :----- | | Največji premer vrtanja | 16 mm | | Območje vrtljajev | 350 – 2400 vrt/min | | Napajanje | 230 V | | Vpenjalna glava | MK2 | | Največji hod vretena | 90 mm | | Razdalja vretena od stebra | 150 mm | | Razdalja vretena od podlage | 430 mm | | Območje nastavitve višine mize | 335 mm | | Premer stebra | 60 mm | | Dimenzije mize | 240 × 240 mm | | Dimenzije podlage | 400 × 232 mm | | Širina utora za T matico | 14 mm | | Moč motorja (S1 / S6) | 550 W / 700 W | | Skupna višina | 910 mm | | Teža | 46 kg |

Stanje: novo, Leto izdelave: 2026, Namizna vrtalna strojna CORMAK WS20B je napredna stebarna vrtalna strojna za obdelavo kovin, opremljena z avtomatskim podajanjem vretena, ki omogoča natančno vrtanje in navojno obdelavo v konstrukcijski jekleni in drugih kovinah. Zahvaljujoč premišljeni konstrukciji, veliki moči in natančnem nadzoru podajanja, model WS20B zagotavlja visoko učinkovitost pri uporabi v industrijskih in delavničnih okoljih. Lrodpfx Akorif T Dsheu Glavne prednosti stroja: * Avtomatsko podajanje vretena – natančna nastavitev podajanja do 80 mm/min omogoča enakomerno in nadzorovano vrtanje. * Funkcija navojnega obdelave z avtomatskim preklapljanjem smeri vrtenja – zagotavlja varnost in učinkovitost pri delu z navojniki do M16. * Visoka togost konstrukcije – stebriček premera 85 mm in kaljeni ulitki zmanjšujejo vibracije in povečujejo natančnost vrtanja. * Hod vretena 135 mm – idealno za globoke luknje brez potrebe po prestavljanju obdelovanca. * Pasni pogon – 5 stopenj hitrosti v območju 280–1875 vrt/min omogoča optimalno prilagoditev parametrov materialu. * Varnostni sistemi CE – zaščitni pokrovi vretena in prenosnega mehanizma z varnostnimi stikali povečujejo varnost operaterja. Konstrukcija in tehnologija Namizna vrtalna strojna z avtomatskim podajanjem CORMAK WS20B je zasnovana za dolgotrajno in zanesljivo uporabo. Vreteno in elementi prenosnega mehanizma so izdelani iz kaljene in toplotno obdelane jekla. Stebriček, osnova in delovna miza so izdelani iz natančno obdelanih, kaljenih litinskih odlitkov. Stožčasti vtičnica Morse MK2 omogoča hitro menjavo orodja in uporabo različnih dodatkov. Natančnost in učinkovitost Kombinacija funkcije avtomatskega podajanja z visoko močjo motorja (1,1 kW) omogoča gladko in ponovljivo vrtanje tudi v težko obdelovalnih materialih. Stabilna konstrukcija in možnost vrtenja delovne mize za 360° povečujeta udobje operaterja in omogočata prilagodljivost pri nastavljanju obdelovancev. Uporaba Vrtalni stroj z avtomatskim podajanjem CORMAK WS20B najde uporabo v: * industrijskih obratih, * mehaničnih delavnicah, * oddelkih vzdrževanja, * tehničnih šolah in izobraževalnih centrih. Primerna za vrtanje, razširjanje in navojno obdelavo kovin, aluminija in konstrukcijskih plastičnih materialov. Standardna oprema: * Vrtalno vpenjalo s ključem * Klin za odstranjevanje stožčastega vtiča * Zaščitni pokrov vretena tipa U z varnostnim stikalom * Zaščitni pokrov pasnega prenosnega mehanizma z varnostnim stikalom Tehnični podatki Parametri Vrednost Maksimalni premer vrtanja (jeklo) 20 mm Maksimalni premer navoja (jeklo) M16 Hod vretena 135 mm Stožčasti vtičnica vretena MK2 Območje hitrosti vrtenja 280 – 1875 vrt/min Število hitrosti 5 Območje hitrosti podajanja 0 – 80 mm/min Premer stebrička 85 mm Debelina stene stebrička 12,7 mm Razdalja vreteno–stebriček 260 mm Razdalja vreteno–miza 366 mm Razdalja vreteno–osnova 678 mm Dimenzije mize 300 × 320 mm Dimenzije osnove 376 × 566 mm Moč motorja 1,1 kW Napetost 400 V Neto teža 179 kg Dimenzije stroja 800 × 450 × 1250 mm

Stanje: novo, Leto izdelave: 2026, The CORMAK WS32 bench drill is a robust and precise column drilling machine for metal, engineered for intensive use in industrial and workshop environments. With high rigidity, an impressive spindle stroke, and tapping capability up to M24, this machine is a versatile tool for a wide range of machining tasks. Key features of the machine: • Tapping function – automatic left-hand rotation enables safe and accurate threading operations. • Spindle stroke 150 mm – allows for deep-hole drilling without repositioning the workpiece. • High rigidity – 100 mm diameter column and stable cast iron base provide excellent rigidity and vibration damping. • Belt drive – five speeds (280–1875 rpm) for precise adjustment to the material being processed. • Morse taper MK3 – enables the use of a wide range of drilling tools and taps. • 360° rotatable worktable – with T-slots, manually adjustable in height. • Work safety – spindle guard with safety switch and CE certifications. Construction and technology The CORMAK WS32 bench drill for metal is manufactured from premium grade, stress-relieved cast iron, ensuring long-term durability and machining precision. Hardened spindle and gearbox shafts guarantee wear resistance. The clear control panel and ergonomic arrangement of controls contribute to operator comfort. Precision and performance Thanks to its massive construction and large spindle stroke, the WS32 model ensures stable operation even in demanding applications. Tapping up to M24 makes it an ideal solution for processing heavy steel components. Smooth spindle operation and flexible speed range increase drilling and threading productivity. Applications The CORMAK WS32 column drill is intended for: Lrsdpfxerif Ude Akhju • the machinery and metalworking industries, • locksmith and tool workshops, • maintenance departments, • training and technical facilities. The machine enables precise drilling, reaming, and threading in steel, cast iron, and non-ferrous materials. Standard equipment: • Drill chuck with key • Taper drift • U-type spindle guard with safety limit switch • Belt drive cover with safety switch Technical Data Parameter Value Maximum drilling diameter (steel): 32 mm Maximum tapping diameter (steel): M24 Column diameter: 100 mm Column wall thickness: 12.7 mm Spindle stroke: 150 mm Spindle-to-column distance: 265 mm Spindle-to-table distance: 390 mm Spindle-to-base distance: 745 mm Spindle taper: MK3 Speed range: 280, 400, 675, 1140, 1875 rpm Number of speeds: 5 Table dimensions: 380 × 400 mm Base dimensions: 645 × 470 mm Machine height: 1370 mm Motor power: 1.1 kW Power supply: 400 V Net weight: 230 kg Overall dimensions: 900 × 500 × 1400 mm

Stanje: dober (rabljeno), Drilling machine, pillar drilling machine, column drilling machine, multi-spindle head, multi-spindle drill head, drilling gearbox -with two-spindle drill head, manufacturer: Sigloch Schrieder, type: V602 -Drive power: 1.02/0.88 kW -Drill spacing adjustable: 18–110 mm -Max. drill diameter: 2x Ø 6 mm -Table size: 275 mm -Spindle taper: MK3 Lrodpfx Aoc Rpnnokheu -Throat depth: 220 mm -Speeds: 100–2900 rpm -Column diameter: Ø 100 mm -Spindle stroke: 75 mm -Gearbox -Dimensions: 900/400/H1910 mm -Weight: 230 kg

Leto izdelave: 1985, stanje: zelo dobro (rabljeno), številka stroja/vozila: 2476, for drill spindle mounting: MT 4 max. input speed: 1500 rpm Lsdpjd R Em Iefx Akhsru diameter up to: 10.2 mm mounting shank for quills: overall height: 500 mm weight:

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Drilling and insertion machine for all types of furniture fittings; row drilling and group drilling machine in the 32 mm system. Power supply: 400V, 0.75kW Ljdpfx Akoumw Sbehoru Spindle speed: 2800 rpm Stop rule: 960 mm 2x swiveling stops For drills with 10 mm shank diameter Maximum workpiece thickness: 40 mm Includes: 1x 7-spindle drilling head for row drilling with 32 mm pitch, equipped with integrated positioning pins Manual feed Base frame included Available at extra cost: Olive (handle) drilling head: €450.00 Mepla drilling head with press-in die: €550.00 Hettich drilling head with press-in die: €550.00

Stanje: novo, Leto izdelave: 2026, Spindle distance 32 mm Ledpfx Ajy Ehyvekhoru Working width 1088 mm Max. drilling depth 85 mm Motor power 2x1.5 kW Machine dimensions 1320x1040x1250 mm MAGGI DOWEL DRILLING MACHINE SYSTEM 32 - Drilling beam with 35 spindles, 32 mm pitch - Working width 1088 mm - Max. drilling depth 85 mm - Drill shank diameter 10 mm - Motor 2 x 1.5 kW - Voltage 400 V, 50 Hz - Spindle speed 2800 rpm - Worktable dimensions 1330 x 410 mm - Rear fence max. 300 mm - Working height 850 mm - Operating pressure 6-8 bar - Machine dimensions (LxWxH) 1320 x 1040 x 1250 mm - Weight 450 kg complete with: - Spiral system for fine adjustment of drilling depth - Quick-change chucks (5 pcs included) - Folding side fences with fine adjustment via counters with decimal display - 2 patented pneumatic clamps - Stepless pneumatic tilting of drilling unit from 0-90° - Angular error compensation system - Drill height adjustment via counter with decimal display - Fence rail for line drilling, 1500 mm left and right, with 4 folding stops - CE conformity