Vrtanje nakup rabljenega (1.069)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Number of independent vertical spindles: 8 Number of horizontal spindles on X axis: (2+2) Number of horizontal spindles on Y axis: (1+1) No. 1 blade for slot machining on the rear of the cabinet (ø 100 mm) Max. panel thickness: 50 mm Control: Full Parametric Max. panel weight: 25 kg Max. panel dimensions (see layout): X, Y 920, Z 50 mm Min. panel dimensions: X 270, Y 150 (70 opt.), Z 12 mm Gbsdpfxjuxmvzs Ah Dsu Number of controlled axes: 3 Panel feed speed: 25 m/min Spindle rotation speed: 3600 rpm Operating pressure: 7 bar Suction port diameter: ø 120 mm Extraction capacity: (2000 m³/h) – (30 m/s) Max drilling depth for all horizontal bores in X and Y: 30 mm Max drilling depth in vertical: 45 mm Max. horizontal drill bit diameter: 12 mm Max. vertical drill bit diameter: 35 mm Motor: 1.5 kW Dimensions: 2200x1350x1550 mm Weight: 715 kg CE norms

Stanje: rabljeno, A well-maintained used universal drilling and milling machine by Bohner und Koehle, equipped with: - 3-axis HEIDENHAIN digital readout - Swiveling head 90° to the right/left - Large rotary table 800 x 1200mm Gsdpspai Dhjfx Ah Dobu - Central lubrication - Documentation Table size: 800 x 1200 mm Table load capacity: 1000 kg Longitudinal travel (X-axis): 1000 mm Cross travel (Y-axis): 800 mm Vertical travel (Z-axis): 800 mm Rotary table movement: 360° Stepless table feed (longitudinal and cross): 26 – 1100 mm/min Rapid traverse longitudinal and cross: 1600 mm/min Stepless vertical feed: 7 – 350 mm/min Vertical rapid traverse: 500 mm/min Main drive: Milling spindle drive: 2.5/3 kW Spindle taper: SK40 12 spindle speeds: 45 – 2800 rpm Machine dimensions and weight: Width: 220 cm Depth: 220 cm Height: 250 cm Machine weight: 3,300 kg Technical data and dimensions subject to change without notice.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106840-11, skupna masa: 35.000 kg, The drilling method used by the deep hole drilling machine is single-lip drilling. The BW250-T is a deep hole drilling and milling center featuring two separate spindles for deep hole drilling and milling operations. The machining units are equipped with a shared additional travel axis, allowing even small workpieces to be machined from four sides on the clamping table without repositioning. Drilling and Milling Unit Information: - Number of spindles: 1 drilling and 1 milling spindle - Spindle speed, infinitely variable: 0 – 5,000 rpm - Spindle drive power: 17 kW at 100% duty cycle S1 operation - Torque: 260 Nm at 100% S1 operation Gbodpfxjxmh Ers Ah Dsu - Maximum drilling depth: 1,500 mm (in a single pass without interruption) - Drilling diameter: 4 – 40 mm based on ST 60 Travel distances: - X-axis travel: 2,500 mm - Y-axis travel: 1,500 mm - Z-axis travel: 850 mm - V-axis travel: 1,000 mm Traverse speeds: - X-axis speed: 10,000 mm/min - Y-axis speed: 10,000 mm/min - Z-axis speed: 6,000 mm/min Swivel axis system for the drilling and milling unit: - The drilling and milling unit features a horizontal swivel range of -25° / +15° - 3x steady rests for tools Fluid system information: - Coolant supply: deep hole drilling oil - Tank capacity: 2,400 liters - 1x hinged belt chip conveyor - 1x hydraulic and pneumatic power unit/equipment - 1x central lubrication system - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 5.5 kW - 1x compact belt filter: Filtration capacity: 175 l/min For machining: steel / non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 – 120 l/min Pump drive: 11 kW - 1x oil mist extraction system, Extraction capacity: 2,400 m³/h Tool magazine for conventional tools, including: - Automatic tool changer with intermediate gripper - Tool holder interface: HSK 63 - Max. permissible tool diameter: 127 mm - Max. permissible tool length: 400 mm - Tool storage capacity: 40 positions Clamping table with X-axis and NC rotary table: - Length / width: 1,600 x 2,000 mm - Payload (centrically): 15 t - Swing diameter for workpieces: 2,800 mm Measuring systems - Tool breakage monitoring and length measurement for BCM tools, with automatic compensation in the control system Electrical equipment information: - 1x CNC control system TNC 640 Failsafe Heidenhain - 1x drilling process monitoring - 1x remote maintenance - 1x dynamic collision monitoring - 1x hand-held control unit Connection data: - Operating voltage: 3AC 400V ± 10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 65 kW

Stanje: rabljeno, Rabljeni stroj Rabljeni vrstni vrtalni stroj znamke Ganner, tip RB 107 Tovarniška št.: 121627 Moč motorja: 1,5 kW Hitrost motorja: 2800 vrt/min 1 vrtalna greda s 26 vreteni, razdalja med osmi 32 mm 3 pritiskači 1 nožno stikalo Gjdsw I Unwopfx Ah Dobu Razpoložljivost: kratkoročno Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Spindle diameter: 130 mm X-travel: 6000 mm Y-travel: 3000 mm Z-travel: 1000 mm Control unit: SIEMENS 840C Rotary table: 360° Gbodpfx Asxa Hlweh Deu Table dimensions - longitudinal: 3000 mm Table dimensions - transverse: 2500 mm W-axis (spindle longitudinal travel): 700 mm V-axis: 2000 mm Workpiece weight: 30 t Tool changer: 60 positions Tool holder: ISO SK-50 Drive power - milling spindle: 37 kW The machine is in good condition and can be inspected under power by prior arrangement with the seller. Description: All axes are hydrostatically guided except the quill. Longitudinal movement of column (X-axis): 6000 mm Vertical movement of spindle head (Y-axis): 3000 mm Transversal movement of ram (Z-axis): 1000 mm Transversal movement of quill (W-axis): 700 mm Side platen fields on the left and right are not included in the scope of delivery. >>> Scope of delivery includes: Table: Clamping surface rotary table: 3000 x 2500 mm Max. workpiece weight: 30 tons Rotary axis (B-axis): 360 degrees Traverse axis (V-axis): 2000 mm - Automatic tool changer with 60 tool stations - Pick-up station for 3 auxiliary attachments - 2 pcs. angular milling heads (A-axis and B-axis) with Hirth gearing, 1-degree increment - 1 pc. MAPPA spindle extension, 700 mm - 1 pc. long angular milling head (fixed), 1600 mm - 1 pc. triple spindle head - Chip conveyor - Coolant unit with belt filter system - Ram cover plate (for use with the quill)

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Gbodpjd Supgjfx Ah Deu Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 700 mm, Overhauled floor-type boring mill from a high-end aerospace company. New control cabinet New drives New CNC control X / Y / Z: 1,200 / 2,000 / 700 mm (X = longitudinal, Y = transverse, Z = vertical/spindle axial movement) Gedpfx Ahsxizccs Dobu Further details on request Technical data Spindle Boring spindle diameter: 100 mm Spindle taper: ISO 50 Milling spindle diameter: 185 mm Spindle axial stroke: 700 mm Automatic stepless spindle and vertical feeds: 2 × 1,000 mm/min Rapid traverse for spindle and vertical axis: 5,500 mm/min Minimum spindle axis height above table: 0 mm Maximum spindle axis height above table: 1,500 mm Max. distance milling spindle nose to table center: 1,850 mm Spindle speed ranges – Torque range: 5–14 rpm – Continuous power range: 15–1,450 rpm Number of speed ranges (continuous power): 4 Ranges (rpm): 6–51 / 49–160 / 140–460 / 440–1,450 Table Rotary table dimensions: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Transverse travel: 2,000 mm Automatic stepless transverse and longitudinal feeds: 2 × 1,000 mm/min Rapid traverse longitudinal and transverse: 5,500 mm/min Automatic stepless table rotation: 30–100°/min Rapid table rotation: 5,000°/min Lifting data (assembly/transport) Required for group 1 – 1 steel bar Ø 70 mm × 1,600 mm long – 1 steel bar Ø 70 mm × 2,400 mm long – 4 rings for rope spacing – 4 wire ropes Ø 22 mm Weight group 1: approx. 12,500 kg For lifting group 2 – two wire ropes, minimum Ø 18 mm Weight group 2: approx. 3,500 kg For lifting group 3 – use hand ropes Weight group 3: approx. 1,300 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Krmilna enota Znamka: HEIDENHAIN Model: tnc 530 Glavni pogon Območje vrtljajev vretena: 1200 Število osi: 5 Pomik Pomik osi X: 2000 mm Pomik osi Y: 1250 mm Pomik osi Z: 1000 mm Pomik osi W: 600 mm Pomik osi B: 360º Gsdpfx Asw Sy I Dsh Dobu Ta 5-osni MONTAVAR HBG 105 CNC je bil izdelan leta 2009. Ima X-premik 2000 mm, Y-premik 1250 mm, Z-premik 1000 mm, hod osi W 600 mm in rotacijo osi B 360 stopinj. Opremljen je z upravljanjem Heidenhain TNC 530 in ima največje število obratov 1200. Če iščete visoko kakovostne možnosti vrtanja, razmislite o stroju MONTAVAR HBG 105 CNC, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Tipi uporabe Drugi stroji za obdelavo kovin

Stanje: rabljeno, Number of drilling motors: 1 unit Corner fitting drilling: 1=yes, 0=no 1 yes Olive drilling: 1=yes, 0=no 1 yes 1 HESS Fitting Drilling Station for Corner Fittings and Olives This HESS drilling station offers extensive drilling technology at a low price for craftsmen. A complete station for drilling both corner fittings and olives, equipped with all essential features, including: - 2 clamping cylinders - Drilling depth sensing - Effective extraction system - Stop systems for corner fitting and olive drilling - Drill head with quick-change chuck - Adjustable drill feed speed - Automatic program sequence This means technology for perfect work: only one machine with a single drilling unit and one drill head for two operations. System Description: - Base frame as panel for frame and sash up to 100 mm - Drilling unit centrally positioned, height-adjustable manually via threaded spindle - Drill hole position and depth preset for the specific fitting type, adjustable via stop system when changing types - Drill feed speed steplessly adjustable via throttle valve - Direct extraction - Electropneumatic control system with automatic program sequence for: - Clamping the workpiece - Start drilling motor - Move drilling aggregate forward - Drilling - Return drilling aggregate - Stop drilling motor - Release workpiece clamping - Fixed stop systems Standard Equipment / Technical Data: - Sturdy base frame as panel, precise support made of wear-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick - Corner fitting and olive drilling possible with one machine and one drilling unit - Simple and convenient vertical operation, easy handling, no templates needed - Minimal setup time for secure workpiece positioning - Guaranteed precise and accurate boreholes - 2 clamping cylinders for secure fixation of sash or frame, adjustable for different wood thicknesses - Lateral rebate stop for corner fittings Gbjdpfxsvu Hgzj Ah Deu - Ergonomically arranged stop system for olive drilling, with 14 swiveling stops and additional color coding - Fixed stop system for hole height adjustment when switching from corner fitting to olive - Automatic drilling depth sensing for both corner fitting and olive - Drilling unit with quick-change chuck for different tools (corner fitting and olive). Tool change in no time - Automatic program sequence - Clean operation due to effective extraction - Space saving and mobile thanks to steering/brake castors Electrical equipment according to VDE regulations. Electrical connection: 0.55 kW, 400 V, 50 Hz Pneumatic connection: R 3/8", 4-8 bar Extraction port: 1 x 100 mm diameter Extraction speed: 25 m/sec Required space: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Paint finish: RAL 7030 stone grey with RAL 1018 zinc yellow 1 drill set with 1 x 25 mm drill and 2 x 10 mm drills additional 1 x 34 mm diameter drill (Technical data according to manufacturer's information – subject to change without notice!)

Stanje: potreben popravila (rabljeno), Leto izdelave: 1996, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 340547, potovalna razdalja osi X: 400 mm, pomik osi Y: 320 mm, pomik po osi Z: 400 mm, poteza s peresom: 60 mm, skupna masa: 1.300 kg, dolžina mize: 650 mm, teža obdelovanca (maks.): 250 kg, širina mize: 350 mm, moč: 10 kW (13,60 KM), model krmilnika: TNC 124, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The listed milling machine is being sold as defective. Displayed error: Major positioning error on the Z-axis Otherwise, the machine is in good condition and was used exclusively for training purposes. The following parts were newly installed by the service team: - Supply module - Z-axis assembly with brake - Z-axis linear measurement system - Wipers on all axes - Filter mats - Synchronous belt - X-axis linear measurement system - Signal converter for measurement system Total costs for maintenance and repairs amounted to €15,000. The error is still present. Due to the age of the machine and the modernization of the workshop, further repairs have been discontinued. You are welcome to inspect the machine. Gbsdowlqtfjpfx Ah Dju All information is provided without any warranty or guarantee.

Stanje: rabljeno, Leto izdelave: 1997, Rabljeni stroj Leto izdelave: 1997 Stanje: vzdrževan/preverjen za delovanje Oprema in tehnični podatki: Število vrtalnih vreten: 21 kos pri razdelitvi 32 mm Smer vrtanja: spodaj in čelno Zasuk: 0-90 stopinj z ročnim kolesom Pnevmatske pritrdilne naprave za material: 3 kosi Prehod: maks. 100 mm v višino in maks. 640 mm v širino Gbjdpfexizr Rox Ah Dsu Motor: 1,5 kW Premer odsesavanja: 120 mm Vključuje več različnih omejevalnikov (glejte slike) Razpoložljivost: od začetka oktobra Lokacija skladiščenja: Hessen

Stanje: rabljeno, Leto izdelave: 1995, TENONING, MILLING, AND BORING MACHINE BACCI MOD. TTF1 - SX - CE COMPLIANT – USED - Voltage: 380/50 Gbedsmxfhmjpfx Ah Dju - Serial No.: 333 - Year: 1995

Stanje: rabljeno, Leto izdelave: 2000, Število vreten po vrsti lukenj: 11 Gsdpfx Ahsxc Hi Uo Dsbu Število vodoravnih vreten: 3 Glava za lončane tečaje: da, Blum Razmak med svedri: 32 mm Poraba energije: 2,2 kW Vrtalni agregat: vrtljiv

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vrtalni stroj za moznike Dübellock Ayen 23, popolna oprema, delno novi svedri Gedpfx Ahoxg N Dpj Djbu

Stanje: rabljeno, Leto izdelave: 2013, Premer izvrtine, mm Število vodoravnih vrtalnih glav, kos Število navpičnih vrtalnih glav, kos 2 kosa Götzinger vrtalno-rezalnega centra ----- Prodaja po naročilu stranke! 2 enaki stroji: En stroj uporabljen za "leve" dele, drugi za "desne" dele. Stroje je možno uporabljati tudi posamezno. Stroje je upravljala programska oprema za izdelavo oken, lahko pa jih upravljate tudi preko lastne programske opreme stroja. Oba stroja imata enako opremo: - Vrtalni agregat levo in desno za čelne izvrtine. - 3 agregate za vrtanje in rezkanje vzdolžnih obdelav. - Obdelovanci se vložijo le enkrat, nosilec agregata izvede različne operacije. Namestitvena dolžina posameznega stroja cca 6 m. Gbedpfxjv N N Spo Ah Dou Možna posamezna prodaja: Cena na stroj: 10.000 EUR Več informacij v priloženih PDF-jih.

Stanje: zelo dobro (rabljeno), Profesionalni vrtalni nastavek priznane znamke GEWEFA, izdelan v Nemčiji. Namenjen za pritrditev svedrov premera od Ø2,5 do 16 mm v CNC strojih, obdelovalnih centrih in klasičnih rezkalnih strojih. Visoka kakovost izdelave zagotavlja odlično koncentričnost, zanesljiv oprijem orodja in dolgo življenjsko dobo, tudi pri intenzivni proizvodnji. Tip: SK40 × Ø2.5–16 . Kataloška št.: 28.05.046.002 . Stožec: SK40 DIN 69871 . Proizvajalec: GEWEFA – Izdelano v Nemčiji . Leto izdelave: 2007 . Stanje: zelo dobro, rabljeno Idealna izbira za profesionalne industrijske aplikacije in delavnice, ki se ukvarjajo s precizno obdelavo kovin. Cena je za 1 kos. Gsdpfxexizaue Ah Dsbu

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Leto izdelave: 1993 Oprema in tehnični podatki: Višina vpenjanja obdelovanca: do pribl. 250 mm Naprava za vrtanje vzdolžnih lukenj z 2 programskima odmičnima koloma (spuščljiva) Gjdpfxoxiztus Ah Dobu Dvovpenjalna vrtalna glava do 20 mm Ø vpenjalnega stebla Pnevmatski pomik položaja na 2 nivojih 0–100 mm Maksimalna globina vrtanja: 150 mm Precizno rastersko vodilo 12 mm Zajemanje središča in prečno nastavljanje 2 pnevmatska varnostna vpenjalna cilindra Motor: 1,5 kW Hitrost vrtenja: 2800 min⁻¹ Zahtevan prostor z nastavkom in delovnim območjem: pribl. 1200 × 1000 mm Mere (brez nastavka): 1100 x 1100 x 1500 mm Teža: 310 kg Navedeni podatki so nezavezujoči do prihoda stroja v naše skladišče. Razpoložljivost: pribl. konec oktobra 2025 Lokacija: Brandenburg

Stanje: novo, Leto izdelave: 2025, Portable center drilling machine, only 18 kg Gbjdpfx Ahebc Sa Do Dju perfect centers according to DIN 333 – made easy Motor 220V, 1300W, stepless speed control 0-2600 rpm Standard clamping range Ø 30 - 250 mm Accessories: jaws Ø 250-500 mm / Ø 500-750 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Power output: 0.85 / 1.5 kW Speed range: 300 - 4000 rpm Speed settings: stepless Spindle taper: MK-3 (Morse taper 3) Drilling stroke: approx. 105 mm Gbsdpfx Ajhpmbbjh Deu Spindle reach: 200 mm Weight: 152 kg

Stanje: dober (rabljeno), Nagel Citoborma 180 vrtalnik za papir Stroj je 100 % funkcionalen. Gre za najnovejši model. Vrtalna miza je nastavljiva v vse smeri (strani, spredaj/zadaj). Ima omejevalnike za nastavitev razmika vrtanja. Vgrajena miza je povečana različica. Poleg tega ima vrtalnik avtomatsko zaklepanje mize, ki se sprosti po vsakem ciklu. Zelo dobro ohranjeno. Robustna konstrukcija – teža 65 kg. Gsdpoxk U I Isfx Ah Dobu Napajanje 230V Ena vrtalna glava. Premer vrtanja 2–20 mm. Višina sklada 60 mm. Stroj je bil servisiran. Vključuje svedre in orodje, novo rezilo in navodila za uporabo.

Stanje: novo, Bore diameter variable mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Dimensions (L/W/H): 6100 x 1500 x 2300 mm Weight: 950 kg 1 NEW Drilling and Milling Center Götzinger Power Drill 300 With the Götzinger PowerDrill, depending on the requirements and configuration, you can: - Drill on end faces and longitudinal sides - Dowel door leaves, muntins, transoms - Drilling patterns are freely programmable - You can drill for handle olives and corner bearings using quick-change multi-spindle drilling heads - You can mill and drill for lock cases, lever handle sets, PZ cylinders, and 3D hinges - The machine is equipped with both horizontal and vertical milling units - Simple control allows you to create, save, and recall drilling and milling programs as needed Sturdy base frame with sheet metal cladding Table support: 1800 x 200 mm Processing units: X-axis – 500 mm effective travel Y-axis – 0–120 mm Z-axis – 0–105 mm (above the table) Horizontal units: 1 horizontal drilling unit (left dowel drilling unit) ----- Drill motor 220 V, 1.1 kW Collet chuck ER 25 4,000 – 11,000 rpm, adjustable 1 horizontal milling unit for lock cases ----- Milling motor 2.2 kW Speed adjustable, 3,000 – 16,000 rpm Collet chuck ER 25 1 horizontal drilling unit (right dowel drilling unit) ----- Drill motor 1,100 W, infinitely variable Gedpfeif Az Uex Ah Dobu 4,000 – 11,000 rpm with ER 25 collet chuck Vertical units: 1 vertical drilling unit ----- Drill motor 1,100 W, infinitely variable 4,000 – 11,000 rpm with ER 25 collet chuck 1 vertical drilling unit – with quick-change drill head system ----- Drill motor 1.1 kW, 3,000 rpm Included: 1 Drill Head BKF 2/3, for corner bearing insertion, quick-changeable ----- For loose single parts, drill arrangement according to customer's hardware 1 Drill Head BKF 3, for handle olive including drill bits, quick-changeable ----- For loose single parts, drill bits: 1 Kubo d = 25, 2 x Dübo d = 10 1 vertical milling unit for lock case ----- Milling motor 2.2 kW Speed adjustable, 3,000 – 16,000 rpm Collet chuck ER 25 1 length stop left and right, useful length 2.7 m, NC controlled Control: electro-pneumatic with three axes NC position controller and integrated machine functions Input via TFT display, 10" color Machine complete, CE compliant, with 1 set of drilling tools: DÜBO each 1 x d = 6, 8, 10, 12 + 2 roughing end mills d = 16, ready to connect Shipping dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price for the above configuration, ex works: on request Plus freight and installation/commissioning (Technical data as provided by manufacturer – no guarantee!)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1970, - Drilling diameter: 5–30 mm - Drilling depth: 750 mm - Filter Godpfxoxzz He Ah Dobu - Pump

Stanje: novo, Bore diameter variable, mm Number of horizontal boring heads: 1 pc. Number of vertical boring heads: 0 pcs. 1 Götzinger Dowel Gluing and Insertion Machine BLE The BLE is used to apply glue and insert dowels into the end faces of workpieces. Optionally, the BLE can be upgraded with a drilling unit, counter milling unit, and longitudinal stop. A 10" touch panel enables easy operation in manual or online mode. Basic Frame: compact design, covered with sheet metal Table size approx. 800 x 200 mm Pos. 1 ----- 1 Glue station Full-jet valve Precisely adjustable glue quantity Glue gun for opposing hole application Pos. 2 ----- 1 Stainless steel glue pump, high-pressure pump and glue hose Pos. 3 ----- 1 Insertion station with dowel singling device and insertion cylinder Pos. 4 ----- 1 Vibratory feeder for dowels d 8 x 50 mm with feed hose to the insertion unit Pos. 5 ----- 1 Processing unit with cross table, linear guide, and 3 NC-axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm insertion depth Pos. 6 ----- 1 Positioning control 10" color touch panel Up to 500 drilling patterns can be created and stored, which can be easily recalled as needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connectivity Godeu Uu Uzjpfx Ah Djbu For online control, the data must be prepared in the appropriate software format for the controller – our machine can receive and process these data. ----- Total price for version with Pos. 1 to Pos. 6: on request! Optional equipment and surcharges: ----- Pos. 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed 4,000 – 8,000 rpm, collet chuck mounting Drill feed: pneumatic Surcharge: EUR 4,305.00 Additional accessories such as larger touch screen, additional dowel station for different dowel sizes, scanner for program selection, or top rail gluing, available on request! Prices are net plus statutory VAT, excluding packaging/shipping and commissioning. (Technical data according to manufacturer – subject to change and without guarantee!)

Stanje: novo, Bore diameter: variable, mm Number of horizontal drill heads: 3 pcs. Number of vertical drill heads: 4 pcs. Götzinger Power Drill custom version with dowel gluing and pressing station With the Götzinger PowerDrill, depending on the type and version, you can: - Drill on front and longitudinal sides - Dowel assembly for house doors, frame timbers, mullions - Freely programmable drill patterns - Drill handle olives and corner bearings with quick-change multi-spindle drill heads - Mill and drill lock cases, handle sets, PZ, as well as 3D hinges - The machine comes with a horizontal and vertical milling unit - Simple control allows you to create, save, and recall drilling and milling programs easily POWER DRILL – Drilling and Milling Machine Universal drilling machine for drilling olives, corner bearings, dowel assemblies (longitudinal and face sides), milling, lock cases, hinges, etc. Heavy-duty base frame, sheet metal casing Worktable: 1800 x 200 mm Machining unit: X-axis – 500 mm usable travel Y-axis – 100 mm Z-axis – 105 mm 1 horizontal drilling unit (dowel drilling unit, left) Drill motor: 380 V, 1,100 W Collet chuck diameter: 8/10 mm Spindle speed: adjustable 4,000 – 11,000 rpm 1 vertical drilling unit from above, fixed Drill motor: 1.1 kW, 3,000 rpm Quick-change drill head system 1 drill head BKF 2/3, quick-change (for corner bearings) At the loose part, fitting as per customer requirement including spare drills Control: Electro-pneumatic with three-axis NC positioning controller and integrated machine functionality Operation via 10” color TFT display Machine complete, CE-compliant, including 1 set of drilling tools: Dowels: each 1x d=6, 8, 10, 14 mm 2 roughing cutters, d=16 mm 1 cutter, d=20 mm Ready to connect 1 drill head BKF 3, quick-change for olives including spare drills Fitting as per customer requirement 2 drilling units: Gedpfx Ajd Ih Hysh Debu - 1x horizontal, for drilling from above (for hinges) - 1x vertical, for dowel work, right side Drill motor 1,100 W, continuously variable 4,000 – 11,000 rpm with ER 20 collet chuck 2 milling units for lock cases: - 1x horizontal for hinges, lock cases - 1x vertical from above for PZ, handle sets, hinges Milling motor 2.2 kW Speed adjustable 3,000 – 16,000 rpm Collet chuck: ER 25 1 length stop right and left, usable length 2.8 m, NC-controlled When using the length stop, fixed stops are omitted. Dimensions: L x W x H = 2.50 x 1.50 x 2.20 m – machine weight 850 kg (PowerDrill) L x W x H = 0.30 x 0.30 x 6.00 m – length stop weight 100 kg 1 dowel gluing and pressing station, consisting of: - Vibratory feeder for dowels with feed - Dowel pressing station - High-pressure glue pump, stainless steel, with glue container - Full-jet valve for precise, clean glue application - Blow-off nozzle Surcharge for 1 dowel diameter: the base machine increases in length by approx. 300 mm (Technical data as per manufacturer – subject to change without notice!)

Stanje: novo, Bore diameter variable mm Number of horizontal drilling heads: 3 pcs. Number of vertical drilling heads: 4 pcs. Weight: 1,500 kg Dimensions (L x W x H): 4,800 x 1,600 x 2,400 mm Width with table extension: 2,300 mm Godpfx Ahjd Ih Hqj Djbu Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill, depending on the setup and configuration, you can: - Drill for handle olives in the loose frame part or for finished sashes, with multi-spindle drilling head, quick-changeable, also for routing of lock case recesses for RC 2/security transmission - Drill for corner bearings in the loose frame part, with multi-spindle drilling head, quick-changeable, orientation by stop or measuring (tilt windows) - Vertical drilling from above for hardware, pre-drilling for clip in the loose frame part - Milling vertically from above for handles, profile cylinders, 3D hinge hardware - Horizontal drilling with 2 drilling units, different drill diameters, dowel drilling for end grain and longitudinal sides, setting blocks / transoms, mullions, corner joints, front doors etc. - Horizontal milling for lock case / hardware etc. Machine Description - Base frame in robust welded construction, linear guide for X-axis - Table support 3,000 x 200 mm - 6 pneumatic clamping cylinders with automatic retraction - 2 side stops for end grain machining, manually retractable - 2 longitudinal stops manually extendable/retractable Travel Ranges: - X-axis – 3,000 mm effective length - Y-axis – 180 mm - Z-axis – 105 mm Units: - 1 vertical drilling unit (Unit 1) from above, 1.1 kW drilling motor, speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25 - 1 vertical drilling unit (Unit 2) from above, 1.1 kW drilling motor, speed 3,000 rpm, with quick-change drilling head system - 1 drilling head BKF 3, for olives, quick-changeable - 1 drilling head BKF 3/2 for corner bearings, quick-changeable - 1 vertical milling unit (Unit 3) from above, 2.0 kW milling motor, 1,500 - 16,000 rpm, collet chuck ER 25 - 2 horizontal drilling units (Units 4 and 5) 1.0 kW, 1,500 – 12,000 rpm, collet chuck ER 20 - 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 – 16,000 rpm, collet chuck ER 20 Control: electro-pneumatic with 3-axis control X, Y, Z NC Position Controller by B + R, input via 10" TFT display Machine complete with 1 set of drill tools Ø 6, 8, 10, and 12 mm; 2 rough/finish cutters HM Ø 16 mm, CE compliant, ready to connect Extraction connection: 1 x Ø 120, 1 x Ø 80 mm Power supply: 1 x 400 V, 16 Amps Air supply: 1 x Ø 9 mm OPTION: Longitudinal stops right/left with NC axis high/low, programmable, dimension input by rebate or light measurement possible Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – machine weight 1,500 kg ----- Total price in the above configuration, ex-works: upon request Plus delivery and installation/training (Technical information according to manufacturer – without guarantee!)