Vrstica Za Točenje nakup rabljenega (86.023)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NTX26200913, stružna dolžina: 1.530 mm, premer struženja: 670 mm, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 675 mm, pomik osi Y: 300 mm, pomik po osi Z: 40 mm, največja hitrost vrtenja: 4.000 obr/min, število mest v zalogovniku orodij: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with a shortest installation length of 350 mm Machining option: Complete 6-sided machining thanks to a high-performance counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining envelope: Ø 670 mm x 1,530 mm Control system Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: Standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Counter spindle chuck: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with safety cover for main and counter spindle Travel control: Automatic stroke control of the clamping cylinder for main and counter spindle Turn-mill Spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool interface: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for bolt-on tool holders Milling performance: 6,000 rpm, 40 Nm (Turret 2, FANUC) Tool magazine Capacity: 76 tools Tool interface: CAPTO C6 Measuring & Monitoring Tool presetting: Manual tool presetter for main and counter spindle, removable (standard) Position measuring system: Direct measurement system in the X, Y, and Z axes of the turn-mill spindle Sensor system: Spindle sensor measuring system with wireless signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feeder (LNS, IRCO, IEMCA, Edge Technologies, multi) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Coolant & Chip Disposal Chip conveyor: Right discharge, hinge-type belt + drum filter Klsdpfjyap Shjx Af Nol Coolant: Use of water-soluble coolant (emulsion) Pressure: High-pressure coolant system, 70 bar Coolant supply: Through the spindle for tool spindle and lower turret Filtration unit: Knoll/Interlit Compressed air system Blow-off system: For chucks on main and counter spindle Oil mist system Oil mist separator: Extraction port Ø 200 mm, AFS 1600 Filter & Cooling System Filtration unit: INTERLIT TMF300/980 compact filtration unit, 70 bar Additional pressure: 15 bar for turret II with lift pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom ekcentrična vpenjalna naprava nastavek za vrtanje moznika z rasterji 16-22-25-32 mm 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm Ksdpfx Aeycg U Eef Nsll CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Prečni hod: 125 mm Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, HESS1500 2.1 SVA Leto izdelave: 2008 Zagon: 2009 Kjdpoyb Rvksfx Af Nsll Zelo dobro tehnično stanje. Obratovala do konca januarja. Leta 2022 je podjetje Topwerk - Hess namestilo novo valj za zgornji zalogovnik. Vibracijska miza v celoti obnovljena Siemens S7 krmiljenje Vključeni 3 kalupi Cena: 195.000 evrov Stroj se nahaja v Sloveniji

Leto izdelave: 1997, Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 500, Pralni stroj Zippel. V delujočem stanju, z novimi črpalkami. Klodpfx Afeycczho Njl

Stanje: novo, Leto izdelave: 2025, Avtomatski stroj za izdelavo strešne kritine z aluminijaste ali jekleno cinkane za širino pločevine 1000mm Vključen avtomatski odvijalec pločevine,Simens krmilje, tehnična mapa.. Klodpfjw A Rt Hjx Af Nol ROOFING SHEET MAKING MACHINE#ROOF PANEL FORMING MACHINE#METAL ROOFING SHEET ROLL FORMING MACHINE#ROOF PANEL PRODUCTION MACHINE#ROOF TTLE MAKING MACHINE

Stanje: dober (rabljeno), Leto izdelave: 1999, CNC FOLDING MACHINE JORNS - depth 1000mm Kljdpfx Afjyax Rge Njl - material thickens 1.25 - length 6000 mm

Stanje: skoraj kot novo (rabljeno), EX-DEMO MACHINE For sale is an as-new JET belt and disc sanding machine, model JSG-31A, with a disc diameter of 300 mm. This exhibition model is in its original condition and therefore comes with the full warranty. Technical specifications - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Disc table tilt range: -45° to +15° - Belt size: 150 x 1,220 mm Kodpfoycc Tdox Af Njll - Belt speed: 11.5 m/s - Belt sanding table size: 190 x 330 mm - Belt sanding table tilt range: -45° to 0° - Belt arm swing range: 0° - 90° - Extraction connection: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Stanje: skoraj kot novo (rabljeno), SHOWROOM MACHINE For sale: as-new JET Double Drum Sander DDS-237 equipped with a powerful 400 V motor delivering 7.5 HP and a maximum sanding width of 940 mm. The showroom machine is in original condition, so you receive the full manufacturer’s warranty. Technical specifications: - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed rate: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm Kedpfx Afoycc R Nj Nell - Minimum workpiece length: 230 mm - Sanding drum dimensions: each 152 x 940 mm - Sanding belt width: 75 mm or 100 mm - Extraction ports: 2 x Ø 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400 V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.250 kN, izmetalna sila: 125.000 N, CNC All FANUC Roboshot are FULL ELECTRIC Demo FANUC Roboshot S100iB 2024 The machine was used at trade fairs as a demo unit and is practically new. Clamping force: 125 tons Screw diameter: according to customer requirements All additional equipment is configurable according to customer needs and can be upgraded to meet specific application requirements. Additional optional equipment: -FIBER sorting flap (for separation of good and defective parts) -Hot runner controller (integrated and connected to the machine) -V-gate -Additional electrical sockets -Electrical quick coupling for fast mould change -Water piping system -Mouldflo system for digital monitoring of water flow, temperature, and pressure -Machine elevation by 100 mm -Hydraulic power unit for side cores (2CH / 4CH) -Robot (cartezian or 6axis FANUC Robot) -..... This machine is available for Slovenia, Croatia, Bosnia and Herzegovina, and Serbia. Klodpfeya D I Dsx Af Nel

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 55.933 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 26195, vpenjalna sila: 350 kN, premer vijaka: 25 mm, razmak između stupova: 270 mm, delovna prostornina: 42 cm³, tlak vbrizgavanja: 175 letvica, injekcijska masa: 50 g, Prodajamo stroj za brizganje plastike Battenfeld 350 plus/75, leto 2003. Črpalka je bila zamenjana. Stroj ima 58.500 delovnih ur, deluje brezhibno in je v redni uporabi. Zapiralna sila: 35 T, masa brizga: 50 g. Klsdpfeya Ev Ajx Af Nsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 49.429 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 208050, vpenjalna sila: 1.000 kN, premer vijaka: 35 mm, razmak između stupova: 420 mm, delovna prostornina: 137 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 140 g, minimalna višina orodja: 250 mm, izmetalna sila: 25 N, hod izmetalca: 150 mm, število vbrizgov: 1, vrsta vhodnega toka: trifazni, Prodajamo brizgalni stroj ARBURG 420 C GOLD EDITION, izdelan leta 2008. Stroj ima na novo zatesnjene zapiralne in brizgalne enote, deluje brezhibno in je v redni proizvodnji. Zapiralna sila: 100 t Teža vbrizga: 140 g Premer polža: Ø35 mm Stroj je opremljen z: -priklopom za 3 šobe za vroče kanale -vmesnikom EUROMAP 67 -priklopom za dozirno enoto za barvo Klsdpfx Aoya Egujf Nsl -priklopom za pihanje zraka / upravljanje s transportnim trakom Stroj se prodaja brez robota. MATEJ LORENCI: +386-31-589-330

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Kjdpfex Ux U Aox Af Noll Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm Kedswyc H Topfx Af Nell - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ročni stroj za biganje in perforiranje z ročnim pogonom Italijanski proizvajalec Costruzione Macchine Cartotecniche, tip STM-RMI50 Aktivacija procesa biganja/perforacije s stopalko Orodje z dvema širinama biga Orodje za perforacijo papirja (udareno orodje) Enostavna menjava orodij Ksdpfx Aoya Im Djf Nell Maksimalna širina papirja: 50 cm Serijska številka: 2100820961

Stanje: rabljeno, Leto izdelave: 2007, Ser. št. 61004286, upravljanje, proizvajalec Krauss Maffei, tip MC4, 2 brizgalni enoti, vrtljiva miza, zapiralna sila 200 t, razdalja med stebri 630 x 560 mm, premer polža 25/18 mm, maksimalna teža brizga 47/20,8 g, 2 dozirni napravi, proizvajalec Piovan Klsdpjxug R Nsfx Af Njl +++ Pozor: Stroj je del spletne dražbe! +++

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Kodpfxowyda Us Af Noll Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 71.782 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 38 mm, tlak vbrizgavanja: 1.341 letvica, minimalna višina orodja: 250 mm, hod izmetalca: 80 mm, Ponujamo ta rabljeni BOY 50 A stroj za brizganje, letnik 2001. Proizvajalec: BOY Model: 50 A Leto izdelave: 2001 Stanje: rabljeno Število obratovalni ur: 71782 - Cilinder Ø 38 mm; 121 gram za PS; 1341 bar - Svetla mera med vodili: 335 x 305 mm - Minimalna višina orodja: 250 mm - Maksimalni razmik plošč: 600 mm - Izmetač: hod do 80 mm (nastavljiv) - Odprta šoba R35 - Dvigalo za orodje Stroj je dobro ohranjen in v delovnem stanju, možen ogled v našem skladišču. Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite. Kljdpfx Asya E Hhef Nol

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Odlično ohranjen stroj, malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Kljdpfx Aevppkfof Nel

Stanje: rabljeno, Leto izdelave: 2004, Used condition Kjdpfexvivdex Af Nell Year of manufacture: 2004 Stock number: 050078 Delivery time: prompt, subject to prior sale Country of origin: Taiwan Price: €19,700 Stock: 1 Grinding length: 810 mm Distance spindle to table: 630 mm Table: 800 x 400 mm Magnetic chuck: 800 x 400 mm Table movement hydraulic: 850 mm Table movement manual: 900 mm Table speed: 5 - 25 m/min Incremental cross-feed: 3 - 32 mm Max. cross-feed: 405 mm Automatic vertical feed: 0.001 - 0.04 mm Spindle speed: 1450 rpm Spindle motor: 3.7 kW Length: 3350 mm Width: 1730 mm Height: 1930 mm Weight: 2900 kg Grinding wheel dimensions: 355 x 50 x 127 mm Automatic depth adjustment Electro-magnetic chuck 1 new grinding wheel flange 1 new grinding wheel Coolant system with paper filter Automatic dressing device above grinding wheel with new diamond New grinding wheel balancing stand New cross-guide covers Operating manual in English with CE Declaration of Conformity

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Sheet thickness range – mild steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Dust extraction port: 120 mm diameter Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor power: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT, TOP SIDE The machine features a stress-relieved, welded steel frame for a stable and rigid structure. Motorized height adjustment of the work table via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta switching of main motors * Analog ammeter for each unit * Digital sheet thickness display with decimal point accuracy * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm notifications FEED SYSTEM Robust steel construction with wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers at front and rear tables. INCLUDES OPTIONAL TAMPICO BRUSH FOR CONVEYOR BELT CLEANING 1st WORKING UNIT – R Balanced contact roller with oil- and heat-resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinders for automatic positioning as well as lift-off in case of emergency stop. Can be equipped with abrasive belts and/or Scotch Brite. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic emergency brake. Pneumatic abrasive belt tensioning. Abrasive belt centering system with electronic photo sensor. Oscillation adjustment for width and timing. Contact roller adjustment accuracy: +/-0.02 mm Contact roller adjustment speed: 10 m/s Contact roller diameter: 125 mm Rubber roller hardness: 55 Shore Contact roller adjustment stroke (grit compensation, up/down): 8 mm Abrasive belt speed: 3–18 m/s Motor power: 7.5 kW 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotate clockwise and 4 counterclockwise. Oscillating traverse movement of the entire unit. Quick-change brush holders. Brush diameter: 115 mm Number of brushes: 8 pcs. Oscillation stroke: 15 mm Rotation motor power: 2.2 kW Rotation speed: 1,000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s Optional equipment: B Unit – external horizontal drum brush Ø 150 mm * with Scotch Brite brush: €5,150.00 * with 0.3 mm wire brush: €6,060.00 R UNIT – ABRASIVE BELT Motor 11 kW: €740.00 X UNIT – CUP BRUSHES Motor with variable speed 5.5 kW 350/1100 Included OPTIONS: Return to Sender system (workpiece is returned to operator): €1,770.00 Conveyor belt with vacuum system – 3.0 kW: €5,150.00 Kodewiqukspfx Af Nell

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. Kjdpsx Ah A Ajfx Af Nell (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, RAZSTAVNI STROJ Naprodaj je malo rabljen stružnica Drechselmeister Stratos FU 230 z razdaljo med konicami 680 mm in motorjem z močjo 2 KS. Razstavni stroj je v zelo dobrem stanju. Tehnični podatki: - Višina konic: 230 mm - Največji premer struženja: 455 mm (z opcijsko zunanjo stružno enoto do 800 mm!) - Razdalja med konicami: cca 680 mm (možno razširiti!) - Priključek vretena: M33 x 3,5 (kalen) z ASR (Euro) varovalnim utorom* - Konus vretena in konjička: MK2 - Število obratov (2 jermenska prenosa): 60–1.350 min⁻¹ in 180–3.750 min⁻¹ - Hodi pinole: 100 mm (z lestvico in trapezno navoji) - Motor: 2 KS (priključek 230 V) - Teža: 178 kg Stroj se nahaja v A-5431 Kuchl in si ga je mogoče ogledati kadarkoli med našim delovnim časom. Vmesna prodaja pridržana! Kjdpfxoyaphve Af Noll Sorodni izrazi: stružnica za les, stružni stroj, stružnica, struženje, stružni noži, lesno struženje, stroj Referenca: R-A0117

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, DEMONSTRATION MACHINE For sale is a used Drechselmeister STRATOS XL wood lathe with a 3 HP motor! The demonstration machine is in very good condition. Technical Data - Center height: 280 mm - Swing over bed: 550 mm; with optional extension bed (outside turning device): up to 1,000 mm! - Distance between centers: approx. 780 mm (extendable!) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-rotation safety groove* - Spindle and tailstock with MK2 (Morse Taper 2) - Frequency inverter (3 belt speeds): - Speed range 1: 60 – 1,200 rpm - Speed range 2: 100 – 2,200 rpm - Speed range 3: 150 – 3,700 rpm - Quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Klsdpfxoyapc Hj Af Njl Related terms: wood lathe, metal lathe, turning lathe, wood turning, turning tools, woodturning, machinery Reference: R-A0117

Stanje: rabljeno, Leto izdelave: 2004, Pnevmatska tiskalnica za tapetništvo, znamka Camam, leto 2004 (CE), rabljena Mere in teža: 90 x 60 x V 200 cm. Teža 200 kg (1 kos) Kedpfxsyccuhj Af Njll

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna masa: 400 kg, moč: 400 kW (543,85 KM), Ponujamo ta rabljeni URANTA s.n.c. DOUBLE 3350 tračni brusilnik za steklo, letnik 2007. Proizvajalec: URANTA s.n.c. Model: DOUBLE 3350 Kjdpfx Aoyaar Eef Njll Leto izdelave: 2007 Stanje: rabljeno Tip naprave: tračni brusilnik za steklo Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.