Vpenjalo Sk 40 nakup rabljenega (124.553)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Briquette diameter: 40 mm Connected load: 4.1 kW Pressing force/capacity per hour: up to 30 kg/h (material-dependent) Container height: 900 mm Hopper opening: round, 800 mm diameter PLC controlled Hydraulic tank capacity: 50 l Hnodjw Ewpgjpfx Ah Deu Rotary encoder with automatic ON/OFF and level sensor Oil temperature monitor Conveying pipes Fully functional used machine

Stanje: rabljeno, Weiss Type: WK1/1500/40 Weiss Climate Test Chamber, Air-Cooled with Humidity Control Hsdow Hcttspfx Ah Denu (retrofitted for R-452a refrigerant) Temperature range: -40°C to +180°C Cooling rate approx. 2.5 K/min, heating rate approx. 3.5 K/min Temporal temperature deviation at chamber center ±0.1 to ±0.5 K Spatial temperature deviation ±0.5 to ±2.0 K Temperature range (humidity mode): +10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at chamber center ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Heat compensation In the range +25°C to +95°C at relative humidity up to 90%: 500 W Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 1475 mm External dimensions: Height: 2005 mm, Width: 1300 mm, Depth: 2450 mm Test chamber volume: approx. 1540 liters Chamber lighting: halogen bulb 12V, 50W Nominal voltage: 3/NPEAC 400V ±10% 50Hz Nominal power: 11.5 kW, nominal current: 22.0 A Fusing (site): 32A slow-blow Control cabinet and operating panel protection rating: IP54 Refrigerant: R-452a Weight: 920 kg Important information for your safety as a buyer! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a trial run monitored by calibrated instruments. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Stanje: novo, Leto izdelave: 2024, stiskalna sila: 100 t, širina mize: 800 mm, dolžina mize: 800 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: READY STOCK TECHNICAL SPECIFICATIONS FOR 100/40 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS TYPE: 4-COLUMN COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts RAM CAPACITY: 100 TON POT CAPACITY: 40 TON DISTANCE BETWEEN COLUMNS: 800 x 800 mm USABLE WORKING AREA: 800 x 1100 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter RAM STROKE: 600 mm POT STROKE: 200 mm MINIMUM GAP: 100 mm MAXIMUM GAP: 700 mm STRESS RELIEF: Vibratory stress relieve WELDING APPLICATION: EN ISO 15614-1/2017 certified welding application, accredited by TÜRK-AK and approved according to WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731.) PROPORTIONAL SPEED APPLICATION: System is designed with proportional speed feature. Different speed and stop values can be entered at various points of the pressing process to minimize the effects of material and die deformation on the operation. Hedovkvu Tspfx Ah Donu MAX OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 23 cm³ – VICKERS MOVING TABLE FAST DESCENT SPEED: 150 mm/sec – Proportionally Adjustable MOVING TABLE DEEP DRAWING SPEED: 15 mm/sec – Proportionally Adjustable MOVING TABLE RETURN SPEED: 150 mm/sec – Proportionally Adjustable POT TABLE ADVANCE SPEED: 30 mm/sec – Proportionally Adjustable POT TABLE RETURN SPEED: 70 mm/sec – Proportionally Adjustable MAIN CYLINDER BORE: Ø 220 mm – Ck45 POT CYLINDER BORE: Ø 140 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: Ck45 – 2 pcs APPROX. HEIGHT OF PRESS: 3900 mm APPROX. WIDTH OF PRESS: 1110 mm APPROX. DEPTH OF PRESS: 1110 mm DISTANCE OF LOWER TABLE FROM FLOOR: 1100 mm HYDRAULIC UNIT: VICKERS COOLING SYSTEM (with fan): CIESSE LEVEL INDICATOR: DONALTSON AIR FILTER: CIESSE RETURN FILTER: DONALTSON OIL & TEMPERATURE GAUGE: DONALTSON VALVES USED: EATON FILTER CONTAMINATION WARNING: ELECTRONIC CONTROLLED LUBRICATION SYSTEM: AUTOMATIC (ADJUSTABLE VIA SCREEN) RAM STROKE ADJUSTMENT: ADJUSTABLE VIA SCREEN POT STROKE ADJUSTMENT: ADJUSTABLE VIA SCREEN RAM TONNAGE (PRESSURE) SETTINGS: ADJUSTABLE VIA SCREEN POT TONNAGE (PRESSURE) SETTINGS: ADJUSTABLE VIA SCREEN SYSTEM ERROR INFORMATION: DISPLAYED ON SCREEN PRESS STATUS INFORMATION: DISPLAYED ON SCREEN DIE MEMORY: ADJUSTABLE VIA SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFO: DISPLAYED ON SCREEN LINEAR SCALE: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCH PANEL SCREEN: DELTA 7'' SWITCHGEAR: SIEMENS – SCHNEIDER SAFETY PLC: PILZ PNOZ MULTI LIGHT CURTAINS: LEUZE – 2 units APPROX. WEIGHT: 5.5 TON

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, 7 assi Y1-Y2-X-R-Z1-Z2-X1, compensazione idraulica, utensili Promecam con bloccaggio idraulico superiore, fotocellule laser DSP, n. 2 supporti lamiera elettroidraulici, controllo numerico Delem DA65 Hsdpfx Ahelx Dqne Donu

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, nosilnost: 5.000 kg, dvižna višina: 4.000 mm, vrsta goriva: dizel, tip droga: standard, gradbena višina: 2.800 mm, dolžina vilic: 1.400 mm, vrsta pogona: Diesel, Side loader Mast type: Standard Hnedpeu Ac Inofx Ah Deu Technical condition: good

Stanje: dober (rabljeno), Leto izdelave: 2005, Andreas Schmid Climate Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Model: VKT 3.000 /-40/+130 Temperature range: -40°C to +130°C Program controller: Stange SE - 502 Hnsdpfxsuuibke Ah Dju Mains voltage: 400 V Rated current: 32 A Refrigerant: R 404 A / R 23 Year of manufacture: 2005 External dimensions: W 1600 x D 800 x H 2430 mm TK-16 You can find more items – both new and used – in our shop! International shipping costs available on request!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Briquette diameter: 40 mm Connected load: 4.1 kW Pressing power/capacity per hour: up to 30 kg/h, depending on material Hopper size: 900 x 900 mm PLC controlled Hydraulic tank capacity: 50 l New exhibition machine with only 5 operating hours Hjdjvptrtspfx Ah Donu

Stanje: zelo dobro (rabljeno), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber, 600 liters, with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, development & quality assurance. Device description: For sale is a professional temperature chamber from Vötsch Industrietechnik, Model VT 7060 with SIMcon 32-net controller. This high-performance device is suitable for a variety of demanding environmental simulations, from material testing and electronics testing to long-term climate stress tests. Technical data (excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –40 °C to +180 °C Temperature deviation when stabilized: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Controller: SIMcon 32-net with touch panel Interfaces: RS232, optional RS485/422 Hnjdpjwybb Nsfx Ah Dju 1 × port NW 50 mm left 1 × port NW 125 mm left 2 × ports NW 125 mm right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Nominal voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 9.1 kW Nominal current: 19.0 A Refrigerant: R 404A and R 23 Weight approx. 675 kg For your safety as a buyer, the following information! The following steps are performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Shipping / Collection: Collection preferred Shipping via freight carrier on pallet possible across Europe (shipping costs based on effort) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data, specifications may change!) Feel free to contact us by phone for further questions.

Stanje: novo, Stock clearance sale - New - Briquetting Press GP Genius I/40 Briquette diameter: 40 mm Pressing capacity: depending on material Hopper opening: 900 x 900 mm Hopper height: 1025 mm Standard hopper volume: approx. 0.6 m³ Motor power: 4.10 kW Connection rating: 400 V +/- 5% / 50 Hz Control cabinet: electronically controlled via PLC Hydraulic unit: with approx. 50 l tank for hydraulic oil Paintwork: RAL 7016 + 5017 Overall dimensions: L = 1,600 mm, W = 1,250 mm, H = 1,300 mm Weight: approx. 550 kg incl.: - Automatic briquette length adjustment: automatic regulation of length according to material density - Gear motor with feed screw for screw pre-compaction - Permanent agitator - Connection piece for transport pipe - Chrome-plated tongs - Manual control of all cylinders - Automatic end position for all cylinders Hedovwfzcepfx Ah Denu - Safety switch for oil temperature - Automatic shutdown in case of bridging in the container and interruption of press cycle due to foreign objects - CE compliant - Rotary encoder automatic ON/OFF - Oil temperature monitor - 2 transport pipe bends 90°, radius 500 No. 001 003

Stanje: dober (rabljeno), Leto izdelave: 2008, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, stiskalna sila: 300 t, CNC Crowning Hydraulic tool clamping EFL Easy Form Laser measuring & correction system Hjdpfx Ahjwrza Ao Donu Set tooling Laser safety guard Controlled axes: Y1/Y2/X/R/V axis Max. bending length: 4000 mm Distance between uprights: 3150 mm Max. pressing force: 320 t Table opening (daylight): 570 mm Max. stroke: 300 mm Table width: 200 mm Throat depth: 400 mm Approach speed: 120 mm/min Working speed: 14 mm/min Return speed: 130 mm/min X-Axis travel: 1000 mm Control system: CADMAN Power: 42 kW Length: 5800 mm Width: 2300 mm Height: 3800 mm Weight: 23,000 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 5.273 h, nosilnost: 4.000 kg, dvižna višina: 4.000 mm, vrsta goriva: dizel, tip droga: standard, gradbena višina: 2.850 mm, dolžina vilic: 1.200 mm, vrsta pogona: Diesel, Stranski viličar Hnodpfx Ahsu Acy De Deu Tip droga: standardni Stanje: pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro

Leto izdelave: 1990, Stanje: dober (rabljeno), Weiss Temperature Test Chamber WT 11-18 KWP 500/40 Spring, summer, autumn and winter – your products must withstand varying temperatures during manufacturing, transport, storage and use. The temperature test chambers from Weiss Technik help you assess the impact of thermal conditions on the properties, functionality, and service life of your products. Manufacturer: Weiss Technik Model: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature Test Chamber Hnodjh Izh Iepfx Ah Deu Test Chamber Volume: 500 l Temperature Range: -40°C to +180°C External Dimensions: 110 cm wide, 173 cm deep, 204 cm high Internal Dimensions: 80 cm wide, 85 cm deep, 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of Manufacture: 1990 Condition: Used Complete factory closure, wide range of mezzanine floors, pallet racks, shelving units, and vertical carousels. High-quality industrial machinery, lathes, grinding machines, and hand tools You’ll find more items—new and used—in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Various standard and driven tool holders in different designs Hnodpsbql T Ejfx Ah Dsu for VDI 20, 30, 40, 50, and 60 Please specify the required VDI size when submitting your enquiry! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ Hnedpfxjklv H Ie Ah Dsu - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: rabljeno, pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston - Stroke length: 80 mm - Piston: Ø 40 mm - Piston rod: Ø 16 mm - Overall length: 245 mm - Overall length extended: 325 mm - Dimensions: 54/54/H245 mm Hnedpfx Ajdkx S Nsh Dju - Weight: 1.1 kg

Leto izdelave: 1991, Stanje: rabljeno, Press force 100 t Clear width 810 mm Stroke 400 mm Table area 1140x740 mm Ram area 1140x740 mm Installation height 670 mm Machine weight approx. 8 t Space requirement approx. 1800x1800x3000 mm Two-hand operation BWS as safety mode Press force steplessly adjustable via potentiometer Travel and pressure shut-off Roller block rails in the table Approved for manual loading operations Hnjdpfxjlp U D No Ah Dju

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, obratovalne ure: 10.194 h, nosilnost: 7.000 kg, dvižna višina: 4.000 mm, prosto dvigovanje: 325 mm, vrsta goriva: dizel, tip droga: standard, gradbena višina: 2.900 mm, širina nosilnega okvirja vilic: 1.450 mm, lastna masa: 9.840 kg, skupna dolžina: 4.800 mm, vrsta pogona: Diesel, gradbena širina: 2.200 mm, Sideload forklift Load center: 700 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Super elastic Front tires size: 3.00-15 Rear tires type: Super elastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders available in our warehouses in Hamburg and Gdańsk. Visit our homepage - sago-online. Leasing and financing under attractive terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this J/SH70/14/40 model. Hnsdpfjwacbdox Ah Dju P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and custom modifications for forklifts from 8 tons and up. We can also display your vehicle for consignment sale at our premises. Heating, full cab, Platform height: 1030 mm

Leto izdelave: 2008, Stanje: dober (rabljeno), LVD - PPEB EASY FORM 320/40 MACH-ID 7712 Manufacturer: LVD Model: PPEB EASY FORM 320/40 Control unit: CADMAN Year of manufacture: 2008 CNC crowning Hydraulic tool clamping EFL Easy Form laser measurement & correction system Set of tooling Laser guard protection Controlled axes: Y1/Y2/X/R/V-Axis Specifications Metric US Standard Max. bending length: 4000 mm Distance between uprights: 3150 mm Max. pressing force: 320 T Table opening distance: 570 mm Max. stroke: 300 mm Table width: 200 mm Throat depth: 400 mm Downward speed: 120 mm/min Working speed: 14 mm/min Return speed: 130 mm/min X-axis travel range: 1000 mm Control: CADMAN Power: 42 kW Dimensions (estimated) Length: 5800 mm Hnjdonvduzepfx Ah Deu Width: 2300 mm Height: 3800 mm Weight: 23,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. As such, the information does not constitute representations or contractual conditions. We recommend verifying all key details.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss climate test chamber. Water-cooled Test chamber lighting: halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation at chamber center: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8,000 W Heat compensation at -20°C: 3,000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at chamber center: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation at chamber center: ± 1 to ± 3% RH Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 24 A Rated power: 16.0 kW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 Important information for your security as buyer! The following points are completed on all chambers we offer, before delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Hnjdpfoq Dpzyex Ah Dsu Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in specifications!) We are happy to answer further questions by phone.

Stanje: rabljeno, Gear motor, electric motor, electric geared motor - Manufacturer: Cebeha, geared motor type CB SF 150-63 N/40 - Speed: 23 rpm - Motor: 0.18 kW / 1360 rpm - Hollow shaft: Ø 20 x 85 mm - Protection class: IP54 - Overall dimensions: 260/250/170 mm Hnjdpfx Ahst E D Elj Dou - Weight: 12.5 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1997, obratovalne ure: 7.809 h, nosilnost: 5.000 kg, dvižna višina: 4.000 mm, vrsta goriva: dizel, tip droga: standard, gradbena višina: 2.910 mm, širina nosilnega okvirja vilic: 1.490 mm, dolžina vilic: 1.400 mm, lastna masa: 8.450 kg, skupna dolžina: 5.100 mm, vrsta pogona: Diesel, gradbena širina: 2.200 mm, Sideload forklift Load centre: 700 Fork width: 200 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Pneumatic Front tire size: 3.00-15 Rear tire type: Pneumatic Hsdpov U Eyasfx Ah Djnu Rear tire size: 3.00-15 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on attractive terms are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GX50/14/40. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons upwards. We are also happy to sell your vehicle on consignment for you. Heater, full cab, Platform height: 1060 mm

Stanje: rabljeno, Tool holder, milling arbor, collet chuck, collet chuck holder, chuck, milling tool, adapter, clamping unit, toolholder, Hnedotff Anopfx Ah Dju -Manufacturer: VEB GWB Wiesa, Milling Arbor Chuck SK40 -Type: B 40/40 -Quantity: 5x milling arbor available -Price: per piece -Dimensions: Ø90 x 170 mm -Weight: 1.9 kg/unit

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, obratovalne ure: 14.121 h, nosilnost: 5.000 kg, dvižna višina: 4.000 mm, prosto dvigovanje: 550 mm, vrsta goriva: dizel, tip droga: standard, gradbena višina: 2.800 mm, širina nosilnega okvirja vilic: 1.300 mm, dolžina vilic: 1.400 mm, lastna masa: 8.050 kg, skupna dolžina: 4.680 mm, vrsta pogona: Diesel, gradbena širina: 2.150 mm, Sideload forklift Load center: 700 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Hnsdpsv U Eqfjfx Ah Dou Technical condition: very good Front tires type: Pneumatic Front tires size: 8.25-15 Rear tires type: Pneumatic Rear tires size: 8.25-15 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing & financing under attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DX50/14/40. P.S.: Our master forklift workshop specializes in repair, maintenance, overhauls and custom builds for forklifts from 8 tons upwards. We would also be pleased to offer your vehicle for consignment sale in our facility. Nivo fork Platform height: 1050 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 5.915 h, nosilnost: 6.000 kg, dvižna višina: 4.020 mm, vrsta goriva: dizel, tip droga: standard, gradbena višina: 2.880 mm, širina nosilnega okvirja vilic: 1.460 mm, dolžina vilic: 1.400 mm, lastna masa: 9.690 kg, skupna dolžina: 4.950 mm, vrsta pogona: Diesel, gradbena širina: 2.230 mm, Sideload forklift Load centre: 700 mm Hedpfju Rgqiex Ah Donu Fork width: 180 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tyres type: Pneumatic Front tyres size: 3.00-15 Rear tyres type: Pneumatic Rear tyres size: 3.00-15 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk locations. Visit our website – sago-online. Lease-purchase & financing on attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you don’t buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice about this JDQ60/14/40. P.S.: Our forklift master workshop specialises in repair, maintenance, overhauls and custom modifications for forklifts from 8 tons upwards. We are also happy to sell your vehicle on consignment. Fork positioner, Heater, Full cabin, Platform height: 1050 mm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: JUN6618, Leto izdelave: 2012, obratovalne ure: 12.731 h, nosilnost: 5.000 kg, dvižna višina: 4.000 mm, vrsta goriva: električni, tip droga: standard, TECHNICAL DETAILS Engine: Electric Battery: 80 V, 1,240 Ah Battery Year: 2016 Load capacity: max. 5,000 kg Load center: 600 mm Hsdpfx Aev S Aruoh Djnu Tyres: Pneumatic, 355/65-15 Mast & Lifting System Lift height: max. 4,000 mm Mast type: Standard Mast height: 2,900 mm Platform width: 1,400 mm / 1,200 mm Platform height: 1,000 mm Pantograph reach: 1,240 mm Forks Fork dimensions: 150 x 60 x 1,200 mm Fork carriage width: 1,460 mm MACHINE DETAILS Length: 4,800 mm Width: 2,250 mm Height (overall): 2,750 mm FEATURES - Charger - Cabin - Heater