Fng 40 Cnc nakup rabljenega (29.155)

Stanje: rabljeno, številka stroja/vozila: 186137200089, Rabljeni TOS orodjarski rezkalni stroj, model FNG 40 CNC Letnik 1988 z Heidenhain tirnim krmiljenjem TNC 155 s fiksno kotno mizo 800x400 mm. Pomiki: X/Y/Z = 500/400/400 mm Območje vrtenja: 10–3150 obr/min Vreteno SK40 Zaščita pred ostružki za natikanje Dokumentacija za stroj in krmilje na voljo. Kwjdpfx Adexf Inkekow Stroj se nahaja v 71334 Waiblingen-Beinstein in si ga je možno po dogovoru ogledati.

Stanje: rabljeno, Leto izdelave: 2000, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Kwjdpfxoux Agie Adkjw Table clamping surface: 800 x 400 mm Spindle taper: SK 40 Control: HEIDENHAIN TNC 310 Spindle speeds: 10 - 3150 rpm Spindle motor: 5.5 kW Feeds - longitudinal & cross: 1 - 5000 mm/min Feeds - vertical: 0.5 - 2500 mm/min Rapid traverse: 6 / 6 / 3 m/min Total power requirement: 10 kVA Machine weight approx.: 2.5 t Machine dimensions (L x W x H): 2.16 x 1.70 x 2.0 m Accessories: Fixed table, swiveling vertical head with hydraulic tool clamping and extendable quill, electronic handwheel, coolant system

Stanje: pripravljen za uporabo (rabljen), proizvajalec krmilnikov: TS Touch, vgradna višina: 515 mm, obratovalna hitrost: 20 mm/s, hitrost vzvratne vožnje: 90 mm/s, skupna dolžina: 2.900 mm, skupna širina: 1.850 mm, skupna višina: 2.260 mm, moč: 9 kW (12,24 KM), pomik po osi Z: 275 mm, lastna masa: 5.100 kg, širina prehoda: 2.050 mm, 4 osi: Y1 / Y2 Y3 / X upravljanje preko zaslona na dotik Willa/Modufix zgornje orodje Y3 = spodnja miza, nastavljiva po višini Spodnja miza služi tudi kot pritiskalna matrica (pnevmatska). V spodnji mizi je tudi (električna) kompenzacija upogiba. Kapaciteta: 40 ton x 2050 mm Zadnji prislon: CNC Maks. razdalja med mizo in batom: 415 > 575 mm (spremenljivo) Kodpfx Aeyf Ruhjdkeww Hitrost zaklepanja: 90 mm/s

Stanje: rabljeno, x-Weg 850 mm y-Weg 500 mm z-Weg 500 mm Konus ISO 40 P.D.B. Veličina stola 400x1250 mm Napon 400 V Upravljanje Heidenhain TNC 355 Ukupna potrebna snaga 7,5 kW Hod pinole 50 mm Glava je zakretna putem M-funkcije Tehnički podaci su prema informacijama proizvođača ili korisnika i stoga su za nas neobavezujući. Pridržavamo pravo na prethodnu prodaju; isključivo važe naši uslovi kupovine i prodaje. O nama: Više od 400 vlastitih mašina na lageru Preko 15.000 m² skladišnog prostora, kapacitet dizanja do 70 t Više od 10.000 artikala dodatne opreme za vašu radionicu Ako želite da prodate mašine, proizvodne linije ili vašu firmu, kontaktirajte nas. Više ponuda možete pronaći na našem veb sajtu. Kwedpfoyuqmcjx Adkjw Razgledanje je moguće uz prethodni dogovor. Radujemo se vašoj poseti. Vaš Markus Hirsch tim

Stanje: rabljeno, Leto izdelave: 1993, Well-maintained used CNC profile grinding machine from a screw factory. Ksdpfx Adjwt Uqdokoww For further details, please get in touch.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4040, potovalna razdalja osi X: 7.500 mm, pomik osi Y: 600 mm, pomik po osi Z: 750 mm, skupna širina: 3.000 mm, skupna dolžina: 9.000 mm, skupna višina: 2.000 mm, dolžina podajanja os X: 7.500 mm, dolžina pomika po osi Y: 600 mm, dolžina podajanja os Z: 645 mm, hitrost vretena (min.): 1 obr/min, največja hitrost vretena: 5.000 obr/min, vhodna napetost: 400 V, moč servomotorja: 13.100 W, Oprema: drsna vrata, vrtilna hitrost brezstopenjsko nastavljiva, CMA Drilling/Milling Machine – Efficient Processing for Metal Fabricators & Locksmiths The CMA drilling/milling machine is the ideal solution for locksmith and metalworking shops seeking to process their components quickly, precisely, and economically. Thanks to direct STEP data import or manual programming, workpieces can be manufactured without detours—perfect for single parts, series, and custom constructions. With a machining length of up to 7,500 mm and a generous working area of 600 mm in both X and Y directions, multiple components can be clamped and machined in a single pass. This reduces setup times and significantly increases productivity. An integrated 16-position tool changer ensures maximum flexibility for varying operations and noticeably shortens cycle times. Your advantages at a glance: ✔ STEP import or manual programming ✔ Machining length up to 7,500 mm ✔ 600 mm in X and Y directions Kjdpfxsyc R Rks Adksww ✔ 16-position tool changer ✔ Simultaneous clamping of multiple components ✔ Ideal for steel and metal fabrication ✔ High productivity & short setup times

Stanje: novo, Pressure: 40 Kedpfx Adjd Etfzokeww Bending length: 1530 mm Distance between side frames: 1530 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 2660x1960x2500 mm Weight approx.: 4600 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-4015 Servo-motor driven press brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent the technology of tomorrow. The increased speed and precision of this new machine generation offer you greater efficiency, ergonomic features, and a more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer in this technology, with extensive experience and quality. Standard equipment: KK-Industries is the general representative of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Model REVOLUTION DDM The CNC Servo Electric Press Brake is distinguished by its high precision, accuracy, and versatile range of applications. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and noticeably quieter - Full working length between frames can be used - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment: 3D colour graphical control Delem 66 T 17" touch screen Y1, Y2, X, and R axes CNC-controlled via the panel X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m models X-axis 750 mm, R-axis stroke 250 mm on all other press brakes We also make no compromises on the upper tool and die and equip the CNC Servo Electric Press Brake KKI REVOLUTION with high-quality tooling from EUROSTAMP Italy. Segmented gooseneck upper tool 4-V die block 60x60 mm (V= 16, 22, 35, and 50 mm) Back gauge equipped with servo motors on linear guides and ball screws Of course, every machine is only as good as the service. For this reason, we place strong emphasis on highly qualified staff with extensive experience in CNC sheet metal processing. Laser safety device at the upper beam CE safety equipment Operating manual in GERMAN and ENGLISH Options: Additional controlled axes for back gauge: X1, X2, R, Z1, Z2, Delta X ATF type 6-axis back gauge, X1, X2 – R type back gauge X-Prime type back gauge Hydraulic upper and lower tool clamping CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning ¤ 2,330 - CNC crowning ¤ 4,658 KK-Industries GmbH There's something for everyone here!

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1984, Funkcionalnost: nepreverjeno, številka stroja/vozila: 0175, potovalna razdalja osi X: 650 mm, pomik osi Y: 450 mm, pomik po osi Z: 140 mm, največja hitrost vretena: 80.000 obr/min, obremenitev mize: 500 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Placing a bid obligates the buyer to collect the machine within the specified timeframe: between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel paths X-axis travel: 650 mm Y-axis travel: 450 mm Z-axis travel: 140 mm W-axis travel: 500 mm U-axis travel: 6/20 mm Clearance between columns: 750 mm Clearance from table to spindle: 600 mm Main spindle diameter: 100 mm Work table Table dimensions: 770 x 630 mm Table load capacity: max. 500 kg Taper grinding: max. 16° Digital readout X-/Y-axis: 0.001 mm Positioning accuracy at 20°: 0.004 mm Spindle speeds: from 9,000 to 80,000 rpm Feeds Feed rate X- and Y-axis: 0 – 3,000 mm/min Feed rate W-axis: approx. 800 mm/min Feed rate Z-axis: from 15 to 6,000 mm/min MACHINE DETAILS Control: HAUSER Kodpfjxqd Htex Adkoww Electrical data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection: 8 kW Dimensions & weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Suitable workshop cabinet with contents Various grinding abrasives Assorted high-frequency grinding heads Büche ENF 4000 extraction unit

Stanje: rabljeno, Leto izdelave: 1981, x-travel 650 mm y-travel 450 mm Workpiece height 585 mm Control ADCOS CNC 400 Total power requirement 15 kW Machine weight approx. 5,000 kg Space requirements approx. m HAUSER (Switzerland) CNC-controlled Double-Column Coordinate Grinding Machine Model S 40 – CNC 311 / ADCOS 400 CNC Year of manufacture: 1981 / modernized in 2008 # 0125 Kwedjt Hw S Uspfx Adksw _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel (longitudinal, X-axis) max. 650 mm Grinding head traverse (Y-axis) max. 450 mm Vertical adjustment of the crossbeam (W-axis) max. 500 mm Grinding spindle stroke (Z-axis) max. 140 mm Grinding head stroke rate (4Hz) 0.5–12 m/min Vertical clearance between table/grinding spindle 0–585 mm Passage between columns 750 mm Maximum conical grinding 16° Grinding diameter (bore) approx. 230/360 mm 18 spindle speeds, steplessly adjustable depending on spindle motor, 4,500–80,000 rpm Fine feeds in X and Y axes and W axis 0.5–1,500/3,000/800 mm/min Planetary speed (C-axis) 5–250 rpm Total drive approx. 15 kW – 400 V – 50 Hz Machine weight approx. 5,000 kg Accessories / Special Equipment: • CNC path control replaced in 2007 with an ADCOS CNC 400 control unit featuring a large screen and direct programming at the control, with electronic handwheel for fine positioning of axes: X=table longitudinal, Y=grinding head traverse, Z=quill vertical/stroke, C=rotary axis spindle/quill, U=automatic infeed, W=crossbeam vertical adjustment • Z-axis as rapid traverse for reduced machining times, plunge grinding, face grinding, pre-selection of reversal points (approach + teach-in) and stepless control of stroke speed, thus serving as a quasi 3rd positioning axis • U-axis as manual and controlled infeed axis (radial), at the grinding head, with electric display of infeed size • 1 grinding motor mounted with spindle speed approx. 30,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • Separate coolant system with band filter, separate control and switch cabinet, separate hydraulic system, central lubrication, dust extraction, and more Condition: very good / demonstration-ready under power Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Leto izdelave: 2004, stanje: generalkompletno obnovljen (rabljeno), Precision feed for strips up to approx. 100 mm wide and 2 mm thick Kwsdpjg Iiuxjfx Adksw Feed force: 400 N Repetition accuracy: +/- 0.04 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, številka stroja/vozila: 4110BC19, Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: CNC krmiljenje, PODROBNOSTI O STROJU Tehnični podatki Priključek: 380 V Frekvenca: 50 Hz Kodjxxklxspfx Adkoww Nazivna moč: 35 kVA Zaščita: 63 A OPREMA CNC krmiljenje

Stanje: rabljeno, TECHNICAL DATA - Distance between centres: 1000 mm - Centre height: 175 mm - Travels (Z/X): 1050 x 275 mm - Max. feed rates (Z/X): 10 x 5 m/min - Grinding spindle stock type: 2 external wheels, 1 internal wheel - External left grinding wheel dimensions: 500 x 63 x 127 mm - Right grinding wheel dimensions: 400 x 63 x 127 mm - Grinding wheel motor power: 7.5 kW Kedpfx Asuhbyqjdkeww - Rotational speed: 1670 - 2110 rpm - Grinding spindle stock orientation: -15 to +225 ° - Resolution: 0.001 ° - Workpiece headstock taper: MT5 - Workpiece headstock rotational speed: 1 - 1027 rpm - Workpiece headstock power: 0.785 kW - Tailstock: MT3 - Quill stroke: 35 mm - Weight: 7000 kg - Hours under power: 47,959 h ACCESSORIES - Distance between centres: 1000 mm - Centre height: 175 mm - Axis travels (Z/X): 1050 x 275 mm - Max. feed rates (Z/X): 10 x 5 m/min - Grinding spindle stock type: 2 external grinding wheels, 1 internal grinding wheel - External left grinding wheel dimensions: 500 x 63 x 127 mm - Right grinding wheel dimensions: 400 x 63 x 127 mm - Grinding wheel motor power: 7.5 kW - Spindle speed: 1,670 - 2,110 rpm - Grinding spindle stock orientation: -15 to +225 ° - Resolution: 0.001 ° - Workpiece headstock taper: Morse type 5 - Workpiece headstock rotational speed: 1 - 1,027 rpm - Workpiece headstock power: 0.785 kW - Tailstock: Morse type 3 - Quill stroke: 35 mm - Weight: 7,000 kg - Operating hours under power: 47,959 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 48.000 m/min, hitri pomik os Y: 80.000 m/min, hitri pomik na osi Z: 48.000 m/min, širina mize: 835 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Kodpfx Adswyv Nzjkeww Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-axis travel: 3000 mm Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg X-axis feed rate: 48,000 mm/min Y-axis feed rate: 80,000 mm/min Z-axis feed rate: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply: 25 bar Number of controlled axes: 4 Chip conveyor: Yes Coolant system: Yes Length: 8,000 mm Width: 3,800 mm Height: 3,800 mm

Stanje: zelo dobro (rabljeno), Vpenjalna glava HOLEX SK40 za ER tule višje kakovosti – robustna izdelava, idealna za delo na CNC obdelovalnih centrih. • Tip SK40 – DIN 69871 • ER vpenjalna tulec (premer Ø16 mm) • Dolžine vpenjalnih glav: 70 mm, 100 mm, 110 mm (odvisno od modela) • Maks. obrati 12.000–15.000 obr/min • Navor do 70 Nm • Razred uravnoteženosti G6.3 – stabilno delovanje pri visokih obratih • Znamka HOLEX – Hahn+Kolb Nemčija • Zelo dobro ohranjeno, skladiščno stanje • Možen nakup posameznih kosov ali večjega kompleta Kwedpsw S Itbjfx Adkjw

Stanje: zelo dobro (rabljeno), Profesionalni držala priznane znamke GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – premer vpenjanja Ø6 mm, dolžina 100 mm. • Stožec SK40 – CNC standard • Premer vpenjanja Ø6 mm • Dolžina držala 100 mm • Največja hitrost vrtenja 25.000 obr/min • Visoka natančnost in stabilnost vpenjanja • Rabljeno, delujoče, pripravljeno za uporabo. -- PODANA CENA ZA 1 KOS -- Kedpfx Adjw Sy D Ejkjww

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, NIKKEN CNC rotacijska miza CNC 320V, serija 400V Kwsdpfx Asymyh Tjdkjw - Prirubnica Ø320 mm - Vretena izvrtina Ø80 mm - Sredinska višina 230 mm - Siemens motor

Stanje: novo, Leto izdelave: 2026, vrsta laserja: vlakenski laser, laserska moč: 6.000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables significantly faster, more efficient, and cost-effective sheet metal cutting compared to CO2 lasers. The cutters are characterized by high speeds, productivity, and exceptional cutting accuracy, ensuring unbeatable precision and repeatability. Our fiber lasers are primarily intended for processing the following materials: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel LASER SOURCE POWER 6000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. High-quality steel is used in the machine’s production, which is cut, welded, and then precision machined. The entire frame, gantry, and gantry arms feature additional ribbing to achieve high rigidity and eliminate vibrations and deformations. DRIVES The machines are driven by Schneider AC servo motors with high resolution and power (Y1Y2 x 2000W, x 1500W, Z 400W), ensuring proper acceleration and speed in all axes. Power transmission uses high-quality planetary gearboxes. The X and Y axes use proven helical racks for durability and precision. CUTTING HEAD Sheet cutting is performed by a liquid-cooled WSX head. High-grade quartz glass lenses focus the dispersed laser beam on the material, ensuring high cutting accuracy. For proper processing, the HSU system regulates head height, compensating for material unevenness. The protective window between the nozzle and lens shields the lens assembly from molten metal splatter. LASER SOURCE The laser employs a Raycus Laser source, known for high electro-optical conversion efficiency, low energy consumption, and a high-quality beam. It ensures faster and more reliable operation while minimizing operator errors. Additionally, the source is resistant to back reflections (beam return to the laser). Stable power output guarantees efficient operation with low energy consumption. COOLING Industrial dual-temperature S&A CWFL chillers are specially designed for fiber laser cooling. They feature multiple alarm functions: compressor delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarm. EXCHANGEABLE WORKTABLE The rear-positioned exchangeable worktable minimizes laser downtime. Automatic table exchange takes just 10 seconds, giving the operator time to remove cut elements and load a new sheet while the laser operates on the second table. This system provides excellent production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in optimal condition, racks and guides must be oiled every few days at most. The automatic system initiates lubrication at preset intervals and amounts, all controlled via software. Kwsdpfxsx Tphws Adkew

Stanje: skoraj kot novo (rabljeno), Stroj je v dobrem stanju, ni bil uporabljen. Laserska glava RAY TOOLS BM 110. Kwodpfx Aswfglkedkjw

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: STYLE CNC Machines, število mest v zalogovniku orodij: 24, proizvajalec motorjev: FANUC, Dostava po dogovoru Ref: 24F048 Ksdpfjw Ty S Ssx Adkeww Leto izdelave: 2025 Stanje: Razstavni eksponat Specifikacije: - X-os: 4000 mm - Y-os: 1000 mm - Z-os: 1000 mm - Glavni motor 26 kW (S6) - 8000 vrt/min - BT-40 - Avtomatski menjalec orodij (24 pozicij) - Oddaljeni servis (IXON) + mrežna povezava - Močnejša črpalka za hladilno tekočino z brizgalno pištolo - Nadgrajeno na najnovejšo razpoložljivo programsko opremo STYLE

Leto izdelave: 2023, stanje: novo, PLASMA CUTTING PLOTTER MODEL MTX 2040 Construction: steel + aluminium Working area: 4000 x 2000 x 200 mm XY-axis drive: dual-sided gantry drive, 4Nm stepper motors with gearboxes, rack and pinion Z-axis drive: stepper motor with ball screw Traverse speed: up to 25 m/min Z-axis control system: THC MyPlasm system Linear guides: TBI Cable carriers: IGUS Automatic material detection system Power supply: 240V Permissible load: 2000 kg Net weight: 800 kg USB port for opening projects and transferring files via external pen drive Sheet metal detection system THC torch height control system TBI linear guides Dual-sided gantry drive: X-axis: stepper motor and rack & pinion Y-axis: stepper motor and rack & pinion Z-axis: stepper motor and ball screw Drives based on TBI HGR 20 linear rails Table equipped with a water slat bed – (water table for cleaner cuts, material cooling, and reduced gas emission during operation) PACKAGE INCLUDES: - Water table - Replaceable slat grid - Control software (Polish language) - CE Declaration of Conformity - Technical documentation (DTR) - Warranty - Commissioning and training included in the price Latest control system available for our plotters: - Integrated THC height regulator - Torch anti-dive function - Supported file types: DXF, PLT (HPGL), G-codes (.tap) - Integrated CAM module: MyMini CAM - Automatic recognition of internal and external objects - Real-time toolpath analysis - Cutting parameters database - Project angle correction to material - Start cutting from any point - Option to start cutting from the end - Import DXF, PLT or G-codes - Automatic path generation with offset, lead-in and lead-out Kwodpfx Adsiphrlskew - Compatible with external CAM programs - Separate speed settings for holes - Parameter database - Correction of project to material alignment angle - Software and hardware limits - THC anti-dive functions - Game pad control supported - Material detection via touch system, floating head WHY CHOOSE US - WE ARE A POLISH MANUFACTURER OF PLASMA CUTTING MACHINES - CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) - PROFESSIONAL HIWIN LINEAR GUIDES KNOWN FOR EXTREMELY LONG LIFESPAN AND HIGH CUTTING QUALITY, NO FURTHER PROCESSING REQUIRED - COMPONENTS SUCH AS GEARBOXES, MOUNTS, HOLDERS, ETC. ARE PRODUCED BY US USING CNC TECHNOLOGY, ENSURING HIGH QUALITY AND REPEATABILITY OUR ADVANTAGES: - HIGH-QUALITY SHIELDED CABLES - INDUCTIVE SENSORS ON ALL AXES, RESISTANT TO DUST AND STICKING - ADVANCED MY PLASM THC FOR SMOOTH TORCH OPERATION - CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) INSTALLED IN CUTTERS - WE INSTALL CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE ONES ACCORDING TO CUSTOMER REQUIREMENTS - SUPPORT WITH LEASING PROCEDURE Possibility to choose a plasma cutter tailored to your company’s specific needs. Other table sizes are available upon request.

Leto izdelave: 2023, stanje: novo, PLASMA CUTTING PLOTTER MTX 2040 Ventilated Construction: Steel + Aluminum Working area: 4000 x 2000 x 200 mm XY-axis drive, dual-side gantry drive: 4Nm stepper motors with gear transmissions, rack and pinion Z-axis drive: stepper motor with ball screw Travel speed: up to 25 m/min Z-axis control system: THC MyPlasm system Linear guides: TBI Cable chains: IGUS Automatic material detection system Power supply: 240V Permissible load: 2000 kg Net weight: 800 kg USB port for project loading and file transfer via external USB drive Sheet detection system Cutting height control system (THC) TBI Linear Guides Dual-side gantry drive: - X-axis: stepper motor and rack and pinion - Y-axis: stepper motor and rack and pinion - Z-axis: stepper motor and ball screw Drives run on TBI HGR 20 rails Ventilated table adapted for fume extraction SET INCLUDES: - Ventilated cutting table - Control software in Polish - CE Declaration of Conformity - Technical documentation (DTR) - Warranty - Commissioning and training included in the price Latest control system available in our plotters: - Integrated THC height controller - Torch anti-dive function - Supported file types: DXF, PLT (HPGL), G-Code (.tap) - Integrated CAM module: MyMini CAM - Automatic recognition of internal/external objects - Path analysis with preview - Cutting parameter database - Project angle correction according to material orientation - Option to start cutting from any location - Option to cut from the end - Import of DXF, PLT or G-CODES - Automatic generation of offset paths, lead-ins and lead-outs - Compatible with external CAM software - Separate speed settings for holes - Parameter database - Material orientation correction - Soft and hardware limits - THC anti-dive functions - GamePad control support - Material detection by touch system, floating head WHY CHOOSE US - WE ARE A POLISH MANUFACTURER OF PLASMA CUTTING MACHINES - CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) - PROFESSIONAL HIWIN GUIDES – LONG SERVICE LIFE, HIGH CUT QUALITY WITHOUT FURTHER MACHINING REQUIRED - MECHANICAL COMPONENTS SUCH AS GEARBOXES, MOUNTS, HOLDERS, ETC. ARE PRODUCED BY US WITH CNC TECHNOLOGY, ENSURING HIGH QUALITY AND REPEATABILITY OUR STRENGTHS Ksdpfeiphu Iox Adkoww - HIGH-QUALITY SHIELDED CABLES - INDUCTIVE SENSORS ON ALL AXES – RESISTANT TO DUST AND JAMMING - ADVANCED THC MY PLASM – SMOOTH TORCH OPERATION - CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) INSTALLED IN CUTTING MACHINES - WE INSTALL CUTTING TORCHES PROVIDED BY CUSTOMERS OR PURCHASE TORCHES TO MEET CUSTOMER REQUIREMENTS - SUPPORT WITH LEASING ARRANGEMENTS - Ability to select a cutting torch tailored to your business’s specific needs We also offer tables in other dimensions.

Leto izdelave: 2023, stanje: novo, CNC Plasma Cutting Machine ProMax Professional Series Kjdsnfvlvepfx Adksww TECHNICAL SPECIFICATIONS Working width: 2000 mm Working length: 4000 mm 8-section ventilated table Travel speed up to 50 m/min KEY FEATURES DELTA servo drives Double rail X-axis support Quick START – machine preparation for cutting in under 1 minute Planetary gearboxes Class 6 helical rack and pinions Touchscreen with industrial PC Remote control Sectional extraction table with pneumatic actuators CS Anti-collision system – protects the torch from collision CLS central lubrication system Dual Y-axis homing Laser pointer indicating torch position SC safety system Other table sizes available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 800 mm, pomik po osi Z: 110 mm, Naprodaj je malo rabljen (2023) v Nemčiji izdelan CNC stroj z avtomatsko menjavo orodja (ATC) - CNC Step High-Z S-1400T. Delovno območje 1400 x 800 x 110 mm (X/Y/Z). Z menjavo orodja 1150 x 800 x 110 mm (X/Y/Z). Vreteno Spinogy X22-L-SK20 z XControl E in XControl P. Poleg tega je priložena vsa oprema za takojšnje delo: računalnik Dell z monitorjem, programska oprema, vakuumska črpalka MARPA MV-0040N, odsesovalec ostružkov, 7x držalo za orodje, komplet orodij in dodatna oprema. Kedjyfwakjpfx Adkeww Usposabljanje lahko zagotovim. Stroj se nahaja v Siguldi, Latvija. Trenutno je priključen in ga je mogoče preizkusiti. Dodatne informacije na zahtevo.

Stanje: rabljeno, Leto izdelave: 1997, potovalna razdalja osi X: 3.708 mm, pomik osi Y: 1.208 mm, pomik po osi Z: 1.002 mm, dolžina podajanja os X: 5.000 mm, dolžina pomika po osi Y: 5.000 mm, dolžina podajanja os Z: 5.000 mm, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 35 obr/min, CNC Bed Milling Machine - Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical Data: X-travel: 3708 mm Y-travel: 1208 mm Z-travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35 - 3000 rpm Spindle motor: 22 kW Feed rate: 6 - 5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t Kwedpfowtpfpsx Adkow ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/- 120° (stepless) Milling head in the rear axis automatically swivelling / swing 90° Coolant system Machine can be inspected under power. Availability: immediately Sale from location Westerkappeln Dismantling and loading can be arranged upon request.

Stanje: rabljeno, Leto izdelave: 2011, Pressure: 400 tons Bending length: 4050 mm Frame width: 3400 mm Power consumption: 37.5 kW Approx. weight: 25,000 kg Dimensions (LxWxH): 5750 x 2110 x 3440 mm WAREHOUSE CLEARANCE – INCREDIBLE PRICE! CNC Press Brake DURMA AD-S 40400 (4 m x 400 t) Now at a special price from our Böheimkirchen site: only EUR 55,000! Kwedevfy Sxspfx Adkow (Original price approx. EUR 170,000) Technical Data: Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Highlights: - CNC crowning – electrically adjustable via control system - Upper tool: 1010/A/75° segmented, gooseneck type - Die: Multi-V die - CNC-controlled backgauge - 2 sheet support arms with linear guide - CE-compliant laser safety device (Lasersafe) on upper beam - Machine complies with current CE regulations Unique opportunity – immediately available! Only 1 unit in stock – available ex-site – no waiting time! Take advantage of this rare opportunity to acquire a high-performance machine at a fraction of the original price.