Varilni Stroj Oksi-Goriva nakup rabljenega (28.728)

Stanje: rabljeno, single-head welding machine, single-head butt welding machine, Kämpfer butt-welding machine -Clamping: pneumatic -Weight: 270 kg Iaedeb A Ivmspfx Abxeu

Stanje: zelo dobro (rabljeno), Varilni aparat WECO Pioneer MIG 321MKS, vodno hlajen. WECO Pioneer 321MKS je kompakten, trifazni MIG/MAG inverterski varilni stroj za delavniško in montažno uporabo. Ponuja sinergijske programe, Hybrid Arc Control (HAC) za stabilen oblok in podpira različne varilne načine (ročni, sinergijski, pulzni, dvojni pulz). Idealno za jeklo, nerjavno jeklo in aluminij. Tehnični podatki: • Priključek: 3 × 400 V AC, 50/60 Hz • Varilni tok: 20–320 A • Moč: cca 11 kVA / 10,9 kW • Zaščita: IP23-S, zračno hlajen • Dimenzije (VxŠxG): cca 1110 × 550 × 805 mm • Teža: cca 61 kg. Iaedpfx Abjw N Rlbsxeu

Stanje: dober (rabljeno), - Kapaciteta 100 kVA Iaedpfx Aboykcnqjxeu - Pnevmatski - Izmet 570 mm - 380 V

Stanje: dober (rabljeno), Bosch diffusion welding machine The system described here was designed for the following application: Diffusion welding machine for joining armature leads to the commutator on starter armatures by means of diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welder, copper soft welding unit, copper strip welding unit), consisting of main machine and control system, "PLC control, touchscreen operation." Process description: The workpiece carrier enters the station and is raised. The alignment gripper takes the armature from the carrier and aligns it for the welding position. The loading gripper picks up the armature and places it into the welding chuck. The welding chuck moves the armature into welding position. Contacting system and welding cylinder move together and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves the armature to the transfer position, and the unloading gripper takes the armature and places it onto the raised carrier. The workpiece carrier is lowered. Workpiece carriers with OK (IO) armatures continue on the conveyor system; NOK (NIO) armatures are conveyed to the discharge belt. On one welding machine, the IO armatures are marked with a colored stamp on the commutator face to identify the machine used for welding during final inspection. Technical data: Diffusion welding machine Power data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3-phase Control voltage: 24 V Rated current: 20 A Main fuse: 35 A Water: inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions (without control cabinet): Iaedpfx Asg Icfpsbxou Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of construction: 2016 Financing through our bank is also possible. Complete-concept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Stanje: novo, Current 200 A Duty cycle at 100%: 150 A Mains voltage: 230 V Machine weight: approx. 9.0 t Footprint: approx. 0.46 x 0.15 x 0.32 m TIG welding machine - new Ijdowrzrxopfx Abxsau - 3 m hose package - additional 8 m hose package - earth cable - gas connection hose - documentation

Stanje: dober (rabljeno), Peco welding system, spot welding machine Peco welding system for welding flat strips and electrical conductors Peco LA 40 pneumatic control Bosch E35...DYF welding controller Iedpfeivappex Abxoau Additional welding systems in various sizes – new and used – are available in our shop! International shipping rates upon request!

Stanje: dober (rabljeno), nazivna moč pri 50-odstotnem delovnem ciklu: 50 kVA, – Moč 50 kVA – Pnevmatsko – Izsev 425 mm Iasdpfxeyda Dvj Abxsu – Upravljanje PX 1500 Plus – 400V

Stanje: novo, Leto izdelave: 2025, Angle sealer for shrink film packaging, PRO version with reinforced sealing frame for consistently accurate packaging results. Suitable for medium-sized products, semi-automatic operation (manual product feed, automatic discharge). Ideally used in combination with the PRO version of the AMTEC SHRINKtunnel POF-L. Specifications: 220V, 4kW; no compressed air required; maximum machine cycle speed in idle mode: 20 cycles/minute; maximum product dimensions (mm): L(100-500)xW(100-400)xH(2-280); maximum product weight: Depends on product dimensions and how weight is distributed on the feed table; machine dimensions (mm): L1765xW810xH975; weight (net/gross): 150-200kg. For heavy products, we are happy to produce sample packaging to confirm whether the machine can process your items or, if necessary, to recommend alternative systems for your packaging requirements. For semi-automatic machines, cycle speed should also be understood as operator-dependent based on experience. Iedpfsv Nlzyex Abxsau Please note: our new equipment prices are often below standard used prices. Feel free to enquire and describe your packaging task to us. Typically, 30-50 different new machines are available immediately from stock. For customer-specific machines, we offer very short lead times starting at approximately 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic L-sealing machine for shrink packaging. Ideal in combination with the SHRINKtunnel POF-L. Automatic product infeed and outfeed. - Specifications: 220V, 2.5kW; 5.5 bar, 0.1m³/min; max. machine cycle rate in idle mode: 30 cycles/minute; max. product dimensions (mm): L450 x W350 x H130; machine dimensions (mm): L1700 x W960 x H1400; weight (net/gross): 290/420kg. Please note that our new prices are frequently below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We generally have 30-50 different new machines available from stock for immediate delivery. Additionally, we offer very short delivery times starting from approx. 3 weeks for custom-built machines. - All machines are supplied with a full warranty. Isdpev Nl Akjfx Abxjau

Stanje: novo, Leto izdelave: 2025, Angle welding machine for shrink film packaging of extremely large products, semi-automatic (manual product feeding, automatic discharge) with a hand-operated sealing mechanism for the angular welding machine (no compressed air required). Suitable in combination with the AMTEC SHRINKtunnel POF-XTRA (for very large/wide products). – Specifications: 220V, 4.0kW; max. idle cycle rate: 15 cycles/minute; max. product dimensions (mm): L1150xW870xH350; sealing blade length: L1200xW900mm; max. product weight: depends on product dimensions and how the weight is distributed on the infeed table; machine dimensions: L2840xW1560xH1310mm; weight (net/gross): 350/400kg. For heavy products, we are happy to prepare sample packaging for you to confirm whether the machine can handle your products, or to suggest alternative solutions for your packaging requirements. For semi-automatic machines, the cycle rate is also to be seen as a value depending on operator experience. Iaedpjv Nlz Tsfx Abxou Please note that our new prices are often below typical used market prices. Feel free to contact us and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, PRO version of the vertically operating L-sealing machine for shrink packaging. Ideal in combination with the AMTEC SHRINKtunnel POF-M (High-Speed) PRO version. Thanks to its 4-column design, the machine works in an extremely stable vertical position and applies very even pressure to the shrink film. Excellent sealing results with minimal wrinkling. Height and pressure of the sealing frame are adjustable. Easily adjustable perforation module. Sliding conveyor (kissing table) enables processing of products with lengths under 50 mm. Infeed systems for CD, DVD, etc., are optionally available. - Specifications: max. machine cycle rate in idle mode: 40 cycles/minute; packaging sizes: L(30-400) x W(40-280) x H(2-80), W+H Iodpfsv Nl Dusx Abxoau

Stanje: novo, Leto izdelave: 2025, Economic L-sealer for packaging medium-sized products in shrink wrap. Semi-automatic model (manual product feed and sealing, automatic discharge). – Specifications: 220V, 1.2kW; no compressed air required; max. machine cycle rate in idle: 20 cycles/minute; max. product dimensions (mm): L450xW400xH300; max. product weight: Dependent on the product’s dimensions and how the weight is distributed on the feed table; machine dimensions (mm): L1560xW760xH1040; weight (net/gross): 125-175kg. For heavier products, we are happy to provide sample packaging to confirm whether the machine can process your products, or if necessary, offer suitable alternatives for your packaging requirements. For semi-automatic machines, the cycle rate should also be considered an operator-dependent empirical value. Iodpfxjv Nlzgj Abxjau Please note that our new prices are often below typical used equipment prices. Please do not hesitate to inquire and let us know your packaging requirements. – We usually have 30-50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short lead times from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Angle sealing machine for shrink film packaging of very large products, semi-automatic (manual product infeed, automatic outfeed) with pneumatic closure mechanism for the angle sealer. Suitable for use in combination with the SHRINKtunnel POF-XXL. - Specifications: 220V, 2.0kW; compressed air: 5.5 bar, 0.1 m³; max. machine cycle rate (idle): 20 cycles/minute; max. product dimensions (mm): L900 x W600 x H300 (customizable on request); max. product weight: depending on product dimensions and weight distribution on the infeed table; machine dimensions depend on the actual product size; weight (net/gross): 210/250 kg. Iedpfx Aev Nlztsbxsau For heavy products, we are happy to create sample packaging for you to confirm whether the machine can process your products or, if necessary, to offer alternative systems for your packaging requirements. For semi-automatic machines, the cycle rate should also be considered as an operator-dependent empirical value. Please note that our new prices are often below typical used machine prices. Feel free to inquire and tell us about your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-made machines, we offer very short lead times from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Angle welding machine for shrink film packaging of extremely large products, semi-automatic (manual product feed, automatic discharge) with a manually operated sealing mechanism for the angle welding machine (no compressed air required). Suitable in combination with the AMTEC SHRINKtunnel POF-XXTRA (for very large/wide products). – Specifications: 380V, 5.0kW; max. machine cycle rate (idle): 15 cycles/minute; max. product dimensions (mm): L1750 x W960 x H280; sealing bar length: L1850 x W1050mm; max. product weight: depends on the dimensions of the product and how the weight is distributed on the infeed table; machine dimensions: L3640 x W1715 x H1510mm; weight (net/gross) 450/550kg. For heavy products, we are happy to produce sample packaging to confirm whether the machine can process your products or, if necessary, to offer you alternative systems for your packaging tasks. With semi-automatic machines, the cycle rate should also be considered an operator-dependent experience value. Isdpfx Asv Nl Adjbxoau Please note that our new prices are often lower than typical used prices. Feel free to contact us and let us know about your packaging requirements. – We usually have 30–50 different new machines immediately available from stock. For machines built to customer specifications, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, PRO version of the vertically-operating L-sealer for shrink packaging. Ideally used in combination with the AMTEC SHRINKtunnel POF-XXL (High-Speed) PRO version. Thanks to its 4-column design, the machine works in an extremely stable vertical position and applies uniform pressure on the shrink film. This ensures excellent sealing results with minimal wrinkling. Both the height and pressure of the sealing frame are adjustable. Easily adjustable perforation module. Optional feed systems for CD, DVD, etc. are available. – Specifications: maximum idle machine cycle rate: 40 cycles/minute; packaging dimensions: L(200-830)xW(200-630)xH(10-300), W+H Iodpfxjv Nl D Us Abxoau

Leto izdelave: 2004, stanje: rabljeno, 4-točkovni varilni stroj Hollinger tip ASP-L Iaedsylingspfx Abxsu

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: Ultraweld-40, vhodna napetost: 220 V, Rabljeni ultrazvočni varilec kovin Amtech Ultraweld 40 s deli in krmilniki Iasdpfx Aex A A Exjbxju Proizvajalec: Amtech Model: Ultraweld-40 (aktuator R4A) Z navodilom za uporabo

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Długość 4.000 mm, maksymalna średnica 1.500 mm Iaedpfewtp Ttsx Abxeu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 400 A napajalnik, 2.500 mm, Iajdjwtp Svopfx Abxsu

Stanje: novo, Leto izdelave: 2025, Technische Daten Modell: KMF10 Funktionsweise: Federdruck Iaedpfxovmyals Abxeu Leistung: 10 kVA (50% ED) Schweißkapazität: Bis zu 60 mm Baustahlband Eingangsspannung: 220 V (50 Hz) Sicherungsschutz: 220 V / 40 A Schweißleistungsstufen: 5 Glühleistungsstufen: 5 Netzzuleitung: 2,3 m Schutzart: IP21 Abmessungen (B/L/H): 160 cm x 180 cm x 79 cm Gewicht: 294 kg

Stanje: dober (rabljeno), Leto izdelave: 1987, številka stroja/vozila: Kahny, Popolnoma delujoč Iasdpfx Abexp N I Hexeu

Stanje: rabljeno, Ta oglas je za Hulme Martin 10/3319 toplotni zvarilec. Enota je popolnoma delujoča in pripravljena za takojšnjo oddajo. Gre za impulzne toplotne zvarilce (za zvarjanje enakih termoplastičnih folij), zvarilce s konstantno toploto (za laminirane ali folijske materiale), vakuumske zvarilce in drugo dodatno opremo. Iaedpfx Asxuiv Iobxsu Zasnovan za dolgo življenjsko dobo (po navedbah proizvajalca več kot 20 let uporabe) in enostavno vzdrževanje z izmenljivimi grelnimi palicami in cenovno ugodnimi potrošnimi materiali.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, • Designed for simultaneous welding and joining of all four corners of PVC profiles. • Used to weld four corners of PVC profiles at a 90-degree angle simultaneously. • 0.2 mm welding gap possible for all profile types. • Quick mould changing system prevents time loss. • Welds at high speed and precision thanks to axes controlled by servo motors and planetary gearboxes. • Heating temperature and time parameters can be adjusted independently with the PID system. • Capable of single-corner welding. • Equipped with U-shape (threshold-free door) welding system. • Features a 10.1" touchscreen control panel. • Welding, cooling times, and temperature settings are digitally adjustable according to profile type. • Teflon surfaces can be replaced quickly thanks to roll-type Teflon sheets. PROFILE: • Maximum Weldable Profile Height: 200 mm • Minimum Weldable Profile Height: 200 mm • Minimum Weldable Frame Width and Length: 410*495 mm, 520*520 mm (with gasket pressing) • Applicable angle range: 90 degrees PRECISE POSITIONING WITH SERVO MOTOR AND PLANETARY GEARBOX • Highly precise and error-free operation with axes controlled by high-speed, precision servo motors and compatible gearboxes OPTIONAL • Gasket pressing system Iedpfx Ajrcy Trjbxsau

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 100 ÇİFT KÖŞE KAYNAK MAKİNESİ, • Enables 0.2 mm hairline welding for both white and colored profiles. • Complies with CE standards. • Simplified machine control panel for time savings. • Provides maximum welding strength. • Allows both standard and 0.2 mm welding for coated profiles. • Movable right head can be fixed with a button. Iajdpfeq U Sx Esx Abxju • Maximum welded profile length: 3180 mm. • Minimum welded profile length: 340 mm. • Maximum welded profile height: 190 mm. • Minimum welded profile height: 40 mm. • Fast mold changing system for time efficiency. • Equipped with PLC control system. • Adjustable temperature, welding time, and pressure for various profile types. • Heating unit features thermostatic control. • Heating plate temperature can be easily changed via digital display. • Power supply protects the system against sudden voltage fluctuations. • One set of welding molds included free of charge. • LED warning system in operation and standby modes (2026 model).

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 101 S PVC Tek Köşe Kaynak Makinası, • Complies with CE standards. • Weldable angle: all angles between 25 - 180 degrees. • Maximum height of profile to be welded: 150 millimeters. • Minimum height of profile to be welded: 40 millimeters. • Upper pistons can be clamped individually. • Equipped with a left-moving table system. • Profile clamping is performed conveniently via foot pedal. • Features a PLC control system. • The heating unit operates with a thermostatic control mechanism. • The temperature of the heating plate can be easily adjusted via the digital display. • It is possible to adjust the temperature, welding time, and pressure for different profile types. • The easy die changing system provides significant time savings. Isdpsra Niajfx Abxeau