Vakuum-Prečna nakup rabljenega (1.332)

Stanje: novo, skupna masa: 2.700 kg, Leto izdelave: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT - We will deliver the right vacuum suction system for your specific application! - Delivery worldwide / Dealer inquiries welcome! Ljdpoxffwvsfx Al Neaa Internal number: #570 The images are sample pictures. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank • 1,500-liter tank capacity • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Side flushing port in the tank for removal of contamination or blockages without opening the tank lid • Tank lid can be fully opened to the passenger side and is secured with hook bolts • Two safety stages installed as standard to prevent damage to the compressor • Siphon separator • Overflow with 2 balls and sight glass • Pressure gauge with protective bracket on suction set • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 L air flow • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for the vacuum compressor • Honda GX 390 industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank • Internal suction hose to prevent fouling in engine unit • Silencer for vacuum compressor with oil trap • Stainless steel heat shield above the exhaust • 1 liter of biodegradable compressor oil stored in oil bottle holder • 5L fuel canister in holder • Standard funnel with long neck for changing and refilling engine oil • All engine components and accessories stored in lockable aluminum engine box, powder-coated in desired color Chassis • Self-supporting chassis, fully hot-dip galvanized • 2.7T tandem low-loader chassis • Track width matches passenger vehicles and Sprinter for optimum handling • Lowest possible center of gravity for the suction barrel • 2 axles, each with 1,350 kg load capacity, independent wheel suspension from a renowned manufacturer • Continuous welded V-drawbar • Robust metal mudguards with integrated lamp housings • Stake holders for fast securing of suction hoses with rubber bands • Storage space for tools and accessories Suction Barrel • Overrun brake with Rückmatic (automatic reverse) • Self-locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5m long, each with Perrot couplings • 1x suction lance 3" (1500 mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") side-mounted, right in direction of travel Custom builds and specialized equipment available on request – Take a look: For more detailed information and/or additional images, please contact us directly. A large selection of further vehicles for SALE or RENT is available at: Changes, prior sale, and errors excepted. The buyer is obligated to independently verify the condition and specification of the goods. Sale exclusively subject to our general terms and conditions and with exclusion of any warranty.

Stanje: novo, skupna masa: 3.500 kg, Leto izdelave: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Internal Number: #502 The images are sample images. Actual specifications and color may vary. STS V-2.0 Tank • Tank capacity: 2,000 liters • Tank hot-dip galvanized • Tank slightly tilted backward for improved cleaning • Side flushing port on the tank to remove contamination or blockages without opening the tank lid • Tank lid opens completely to the passenger side and is secured with hook bolts • Two safety stages as standard to prevent compressor damage • Siphon separator – overflow with two balls and sight glass • Manometer on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor, 3,500 liters air flow • Vacuum max. -0.8 bar (continuous operation at -0.5 bar) • Overpressure max. 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose design to prevent damage within the motor unit • Silencer for vacuum compressor with oil catch • Stainless steel heat shield over exhaust Laedpfow Ehfrsx Al Noa • 1 liter biodegradable compressor oil stored in oil bottle holder • 5-liter petrol canister in holder • Standard long-neck funnel for changing and refilling engine oil • All engine components and parts stored in lockable engine box • Engine box made of aluminum, powder-coated in desired color Chassis • Self-supporting, fully hot-dip galvanized frame • Tandem low-loader chassis, 3.5 t • Track width identical to passenger car and Sprinter for optimal driving • Lowest possible center of gravity for suction tank • Two axles, each with 1,750 kg load capacity and independent suspension by a reputable manufacturer • Continuous welded V-drawbar • Sturdy metal fenders with integrated lamp housing • Stake pockets for fast securing of suction hoses with rubber straps • Storage options for tools and accessories Suction Tank • Overrun brake with reverse-automatic • Automatic safety ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5 m long, with Perrot couplings • 1x suction lance 3" (1,500 mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in the direction of travel Custom builds and special equipment available on request – Take a look: For further details and/or images, please contact us directly. A large selection of additional vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently inspect the condition and equipment of the unit. Sale is carried out exclusively according to our terms and conditions and to the exclusion of any warranty.

Stanje: novo, največja dovoljena obremenitev: 1.800 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, skupna širina: 1.880 mm, skupna višina: 1.910 mm, Leto izdelave: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply you with the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries are welcome! The price applies to the base model without optional equipment. The images shown are sample images. Actual equipment and color may vary. Laodsxdv Ipjpfx Al Noa Vacuum Tanker STS V-1.5 * Tank capacity: 1,500 liters * Tank hot-dip galvanized and self-supporting chassis hot-dip galvanized * Continuous welded V-drawbar * Robust metal fenders with integrated lamp housings * Low-bed tandem axle chassis 2.7 t GVW * Track width identical to passenger cars and Sprinter for optimal driving characteristics * Lowest possible center of gravity for the suction tanker * 2 Knott axles, each with 1,350 kg load capacity and independent suspension * TÜV individual approval * Suction unit inclined for easier cleaning * Rinsing port to remove impurities or blockages without opening the tank lid * Tank lid can be opened completely to the passenger side and locked to prevent accidental closing * Tank lid secured with hook bolts (optional quick-release locking available) * Standard dual safety stages to protect the compressor – siphon separator, overflow valve with 2 balls and sight glass, vacuum gauge on oversuction unit, protective bracket for vacuum gauge and oversuction unit * Mechanical level indicator from MZ with color scale * Holders for quick securing of suction hoses with rubber tension strap * Suction hoses with Perrot couplings * 1 piece of suction hose 3” approx. 5 m long * Suction hose unit: – Side 3” suction port with slider – Suction lance 3”, 1500 mm long – Suction hose and lance do not need to be detached from the suction port after use * Enclosure for drive unit made of white powder-coated aluminum * Storage space for tools and accessories between engine enclosure and suction tank * Internal intake hose to avoid dirt ingress in the engine unit * Petrol industrial engine B&S Vanguard 13 HP equipped with oil sensor, fuel tank, and electric start * Stainless steel heat shield above the exhaust * Maintenance-free belt drive for vacuum compressor MEC 3000 with 3,500 liter air output * Muffler for vacuum compressor with oil catch * 1 liter of biodegradable compressor oil stored in oil bottle holder * 5-liter petrol canister in holder * Standard funnel with long neck for engine oil changes and refilling * All engine components and accessories stored in a lockable engine box * STS V-fender box * Side transport boxes made from aluminum * 2 side transport boxes for hoses and accessories * 6 brackets for securing components using bungee cords or tension straps * Powder-coated in white Custom builds and special equipment available on request – Check it out: For further detailed information and/or images, please contact us directly. For a wide selection of additional vehicles for PURCHASE or RENT please visit: Subject to change, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods. Sale is made exclusively according to our Terms and Conditions and excludes any warranty.

Stanje: novo, skupna masa: 2.700 kg, Leto izdelave: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We supply you with the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal reference number: #562 The images shown are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank - 1,500-liter tank capacity - Tank hot-dip galvanized - Tank inclined backward for easier cleaning - Side rinse opening in tank to remove contamination or blockages without opening the tank lid - Tank lid fully opens toward the passenger side and is secured with hook bolts - Equipped with 2 safety stages as standard to prevent compressor damage - Siphon separator - Overflow with 2 balls and sight glass - Manometer on suction assembly with protective bracket - Mechanical level indicator with color scale Engine and Compressor - MEC 3000 vacuum compressor with 3,500 l/min air output - Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) - Maximum overpressure: 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 - Electric starter, oil sensor, operation panel with ignition switch, battery, and fuel tank - Internal suction hose to prevent damage within the engine unit - Silencer for vacuum compressor with oil collection - Stainless steel heat shield over the exhaust - 1 litre of biodegradable compressor oil stored in oil bottle holder - 5L jerry can in holder - Standard funnel with long neck for changing and refilling engine oil - All engine components and accessories stored in lockable engine compartment - Engine compartment made of aluminium, powder-coated in your choice of color Chassis - Self-supporting chassis, fully hot-dip galvanized - Low-loader tandem chassis 2.7t - Track width matches cars and Sprinter vans for optimal handling - Lowest possible center of gravity for the suction tank - 2 axles each rated at 1,350kg load capacity, independent suspension from a renowned manufacturer - Fully welded V-drawbar - Robust metal fenders with lamp housing - Stake mounts for quick securing of suction hoses using elastic straps - Storage for tools and accessories Suction Tank - Overrun brake with automatic reverse function - Automatically securing ball coupling Ledpjxffwcefx Al Neaa - Reinforced jockey wheel - 13-pin connector Connections and Hoses - 2x suction hoses (3") 5m long with Perrot couplings - 1x suction lance 3" (1,500mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right side in the direction of travel Custom builds and specialized equipment available on request – Check us out: For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can also be found at: Changes, prior sale, and errors excepted. The buyer is required to independently verify the condition and equipment of the goods. Sale is conducted exclusively under our terms and conditions and excludes any warranty.

Stanje: novo, skupna masa: 3.500 kg, barva: srebrn, Leto izdelave: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #490 Images shown are for reference only. Actual equipment and color may vary. STS V-2.0 Tank - 2,000-liter tank capacity - Tank hot-dip galvanized - Tank slightly inclined to the rear for easier cleaning - Side cleaning port in the tank to remove contamination or blockages without opening the tank lid - Tank lid can be fully opened to the passenger side and is secured with hook bolts - Standard: 2 safety levels to prevent damage to the compressor - Siphon separator, overflow with 2 balls and inspection glass - Manometer on suction assembly with protective bracket - Mechanical level indicator with color scale Engine and Compressor - Vacuum compressor MEC 3000 with 3,500 l air capacity - Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) - Maximum overpressure: 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 with electric starter, oil sensor, control panel with ignition lock, battery, and tank - Internally routed suction hose for protection inside the engine unit - Vacuum compressor silencer with oil collector - Stainless steel heat shield above the exhaust - 1 liter biodegradable compressor oil stored in oil bottle holder - 5-liter fuel canister in bracket - Standard funnel with long neck for changing and refilling engine oil - All engine components and accessories housed in a lockable engine box - Engine box made of aluminum and powder coated in desired color Chassis - Self-supporting chassis, fully hot-dip galvanized - Low-loader tandem chassis, 3.5t - Track width identical to passenger cars and Sprinter for optimal driving - Lowest possible center of gravity of the vacuum tank - 2 axles with 1,750 kg load capacity each and independent suspension by renowned manufacturer - Continuous welded V-drawbar - Sturdy mudguards with metal lamp housings - Stake holders for rapid securing of suction hoses with rubber bands - Storage space for tools and accessories Vacuum Tank Assembly - Overrun brake with reverse automatic (Rückmatic) - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses Lodpsxd Nucsfx Al Njaa - 2x suction hoses (3'') 5m long with Perrot couplings - 1x suction lance 3'' (1,500 mm long) - 1x Perrot connection (3'') mounted at bottom of tank lid - 1x Perrot connection (3'') side-mounted, right in driving direction Custom builds and special equipment available on request - Check it out: For further details and/or photos, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods independently. Sale is exclusively subject to our General Terms and Conditions and excludes any warranty.

Stanje: rabljeno, Leto izdelave: 2018, Overview This vacuum evaporator was manufactured in 2018 by the Italian company REDA. The machine is designed for the gentle concentration of must, juices, and other liquid products at low temperatures, in order to preserve aroma and product quality. It is in near-new condition and is being offered for sale because it was intended for a project that was not realized. The system features an automated, CIP-capable design. Technical Specifications Performance: 100 l/h evaporation capacity at +22/+24 °C Application: Concentration of must, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 l evaporated / 24,000 l enriched to 10% Supply: - Electrical: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control: PLC automation, IP65 control cabinet, digital temperature displays Scope of Supply Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless steel construction Evaporation chamber | Stainless steel, fully accessible for inspection Lodpfsykrdbex Al Neaa Heat exchanger | AISI 316L tube heat exchanger Vacuum pump | Liquid ring pump with recirculating cooling Chiller unit | Heating capacity 75,000 kcal/h, cooling capacity 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless steel centrifugal pump and single volumetric pressure pump Steam condenser | Stainless steel surface condenser Instrumentation and tanks | Flow meters, stainless steel storage tanks for hot and cold water

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.680 mm, obratovalni tlak: 6 letvica, končni tlak: −0,6 letvica, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, hitrost dviga: 166 mm/s, 2x Hova Column Slewing Crane • 2220847.03 Ledot I S Slepfx Al Neaa • Max. load capacity: 50 kg • Outreach: 4 m • Custom aluminium jib lengths (depending on load capacity) • Smooth-running trolleys with guide and counter-pressure rollers • Custom load capacities • Slewing range up to 270°, adjustable • Standard fitted with HOVA chain hoist and vacuum lifter • Special solutions thanks to in-house production • Top-mounted aluminium column slewing jib cranes • Suspended aluminium column slewing jib cranes • Telescopic slewing jib cranes • Articulated arm slewing jib cranes • Mobile version for transport by forklift or crane 2x HOVAMAT Vacuum Lifter HV 50kg/90° • 2220847.01 • Horizontal and vertical handling of panels of all materials • Custom load capacities with overload protection • Lifting speed steplessly adjustable from 0–10 m/min • Operating voltage: 1x230V/50Hz • Operating pressure: min. 6–7 bar filtered compressed air • HOVA special handling grip for one-handed operation, with all controls for hoist and vacuum lifter • Low dead weight due to compact design • Suction pad arrangement as required with longitudinal and transverse beam • also suitable for gripping with magnets, mechanical or pneumatic grippers • Additional safety with HOVAMAT+ and continuous weight monitoring via scale. Lowering cut-out in case of slack chain, load release only after deposit, optional weight display possible • Optional: energy-saving unit 2x Vacuum Lifters: €6,000 each 2x Column Slewing Jib Cranes: €6,500 each Sale is made under exclusion of any warranty.

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Laedpfxev Si Szo Al Nja Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Barbaric Pillar Slewing Crane with Vacuum Lifter - Jib length: 6 m Laodpfx Alovy Trns Nsa - Overall height: 4.3 m - Load capacity: 250 kg - Comfort control: all functions on the handle, lift/lower, tilt, suction/release - Tiltable by 90° - Lifting speed steplessly adjustable from 0–10 m/min - Chain length: 3.5 m - 230V, 3x1.5 mm² - Operating pressure: 6 bar, filtered, dry compressed air required - Safety system - Reinforced crossbeam: Reinforced version for slightly permeable and mildly textured panels Further details upon request. Showroom machine, viewing available by appointment.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 700 kg, skupna dolžina: 2.860 mm, skupna širina: 1.230 mm, gradbena višina: 1.700 mm, Popolnoma delujoč sejemski sušilnik, Ø 1090 mm Ponujamo naš popolnoma delujoč sejemski sušilnik s premerom 1090 mm. Naprava je zelo kompaktna in praktična glede na potreben prostor ter enostavno premestitev. Ledjxbz Hrepfx Al Neaa Tehnične podrobnosti: Priklop: potreben le vodni priklop za pršenje in 16A industrijski vtikač Ogrevalni sistem: 4 kW električni grelec Merjenje vlažnosti lesa na 3 merilnih mestih Priključitvena izvedba – takoj pripravljena za uporabo Prednosti: Idealno za manjše mizarne Enostavno za transport in fleksibilno postavitev

Stanje: rabljeno, Leto izdelave: 1999, Overview The Sensometic vacuum filler was manufactured by Krones in 1999. The offer also includes a rinser, an Alcoa capper, and an inline cold glue labeller. The equipment is available for inspection at any time. Technical details Capacity: - 12,000 bottles/hour with 0.7L glass bottles - 10,000 bottles/hour with 1.0L glass bottles - 6,000 bottles/hour with 1.5L PET bottles Formats: - 0.7L glass bottle - 1.0L glass bottle - 1.5L PET bottle Closure types: - 28 mm plastic screw cap - Press-on cap Labels: - Body, back, neck loop, neck ring Filling product: - Raspberry and various fruit syrups - Special Hesperiden vinegar Filling temperature: 25°C Machine flow: left to right (L-R) Control system: Siemens S5 Lajdpfxjukkvno Al Nea Scope of supply: - Rinser | Krones | Variojet | 3-channel rinser: steam, sterile water, air - Vacuum filler | Krones | Sensometic - Capper | Alcoa | PP 10 / 360 - Capper | Alcoa | K 10 / 360 - Cold glue labeller | Krones | Prontomatic

Stanje: rabljeno, Leto izdelave: 2021, Overview The filler and capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and is capable of filling chemical products into plastic containers. The machine has ATEX certification, enabling it to process explosive products. The machine can be purchased with warranty. Ljdpomk I Dtjfx Al Nsaa Technical Data - Fully automatic rotary filler - Filling system: mass flow measurement system, Type: Endress+Hauser LPG MASS - Number of filling stations: 16 - Maximum container dimensions: Height: 50-300 mm, Diameter: 20-100 mm - Pressurized feed tank for consistent flow through the flow meter - Below-surface filling to prevent foam formation during filling - Adjustable bottle neck centering - Electronic fill level measurement - CIP capable - Designed for dip tube handling Fully automatic rotary capper - Number of capping heads: 5 with torque adjustment via friction clutches - Fully automatic cap sorting and feeding via BONINO disc sorter with elevator - Chute switch to stop the machine when caps are missing - Cap bunker - Cap presence control

Stanje: rabljeno, Leto izdelave: 2018, Overview The gravity filling machine is a rotary, fully automatic device suitable for filling bottles, tinplate cans, or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar solution, etc.) into containers already filled with solids. The machine can also be used for filling empty bottles. The filler block can be inspected at any time. Technical Details Number of filling stations: 48 Pitch circle diameter: 1,560 mm Output (last running): 250–300 bottles/min at 500ml fruit syrup For twist-off caps, a separate capping unit must be arranged 160–200 bottles/min at 250ml maple syrup Ledsnhikiepfx Al Njaa Applied plastic caps can be fitted using the integrated AROL capper Dimensions Length: 3,000 mm Width: 2,500 mm Height: 2,500 mm Weight: 6,500 kg Electrical Specifications Voltage: 400 V – 50 Hz Control voltage: 24 V DC Installed power: 20 kW Scope of Delivery Filler | Zilli & Bellini | GD48/12 | 2018 Capper | Arol | TSI - EURO VP - W6 | 2018

Stanje: rabljeno, Leto izdelave: 2019, Overview This vacuum filling and capping block was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for filling glass bottles with a high vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system is equipped with 48 filling valves and a 10-head ROPP capping unit, ensuring efficient and highly precise operation. With a capacity of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, fitted with spray balls, and features a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as cap sorter, cap hopper/elevator, and chutes can be supplied upon request; a factory overhaul is also possible. Ljdpexqhvlofx Al Neaa Technical data Filling system: High vacuum with liquid ring pump Capping system: 10-head ROPP (PP) capper Output: Up to 12,500 bottles per hour (0.7 L bottles) Filling valves: 48 Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) Control system: Siemens S7 Cleaning system: CIP with spray balls Operating hours: Approx. 14,000 h Working direction: Right to left Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control, CIP-capable, approx. 14,000 operating hours Filling tower | ALWID Maschinenbau GmbH | – | 2019 | 3.40 × 1.30 × 1.40 m, part of the system Format parts | ALWID Maschinenbau GmbH | – | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle Accessories | 2 EUR pallets with format and head components

Stanje: rabljeno, Leto izdelave: 2004, Overview (H2) This low-pressure vacuum filler was manufactured by MBF in 2004. The machine was in operation until 2017 and was fully functional at the time it was decommissioned. It was replaced due to increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minimal dust present. It is available for sale immediately. Technical Data (H3) Capacity: 6,000 bph (1.0 l bottles) 7,000 bottles per hour (0.75 l bottles) Bottle diameter: 55-120 mm (infinitely adjustable via infeed/outfeed starwheels) Bottle height: 150-370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Ledpowiu Nlefx Al Nsaa Operating direction: Left to right Type of filling valve: Electropneumatic Special Features: - Programmable bottle parameters with automatic adjustment of bottle and filling height - Hot filling capability with automatic shutdown in case of temperature deviation - Automatic speed adjustment depending on bottle infeed - CO₂ pre-flushing of bottles - Inert gas blanketing possible in the filling tank - Automatic level regulation depending on product temperature - Automatic wine changeover via CIP tray - CIP dummies and semi-automatic cleaning program - Remote maintenance modem - Complete documentation (spare parts list, wiring diagram) - Central electric fill-level adjustment Scope of Delivery - MBF Fillmatic 36LV filler - CIP dummy bottles - CIP tray - Tele-modem - Complete documentation (electrics and spare parts)

Stanje: rabljeno, Leto izdelave: 2018, Overview The filler and capper was originally manufactured by Stork and was overhauled by ROBAK in 2018. The machine can be used for filling still beverages into glass bottles. The machine is in very good condition, is currently being dismantled, and is stored in a well-maintained environment. Technical data • Capacity: 7,000 bottles/hour • Filler is set up for 700 ml bottles • 31.5 mm aluminum closure Note: The machine is missing a cap orientation mechanism as well as a cap chute and feeder. These components should be provided according to the specific cap to be used. Lasdpfxjmnkhfs Al Nea

Stanje: rabljeno, Leto izdelave: 2019, Pregled ALWID-KRONE-HV je polavtomatski polnilni stroj, ki deluje z visokim vakuumom. Model je primeren za polnjenje negaziranih medijev v oblikovno stabilne posode. Uporabite lahko različne oblike in velikosti steklenic, formatni deli niso potrebni. Višina polnjenja se nastavi neposredno na ventilu in je neodvisna od prostornine steklenice. Stopnja vakuuma je nastavljiva. Tehnični podatki: Polnilna mesta: 2 Premer polnilnega ventila: mm Primerno za polnjenje viskoznih medijev Področja uporabe: živilska, pijačna, farmacevtska in kemična industrija. Laodpfx Aljxb Unio Nsa

Stanje: rabljeno, Leto izdelave: 1998, Overview This vacuum filler was built in 1998 by the Italian manufacturer GAI. In 2024, the machine underwent a complete overhaul and is now immediately available. Ljdeuch Tmspfx Al Nsaa Technical Details - Effective capacity: approx. 4,500-5,000 bottles/hour - The machine is equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm), Burgundy 75cl, 37.5cl, and Magnums - Rinser with 20 stations, inspected - Filler with 20 valves and vacuum system (new turbine) – valves inspected, new seals, new disc springs - AROL Saturno 4-head vacuum capper – almost new jaws in perfect condition, new vacuum pump and circulation system - New wine inlet solenoid valve - Connector for feed pump - Machine newly overhauled (solenoid valve, jaws, vacuum turbine, seals, vacuum pump) - Electrical connection: 400 Volt / 50 Hz, 3-phase - Dimensions: Length 380 cm x Width 140 cm x Height 250 cm - Weight: 3,500 kg

Leto izdelave: 2019, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 077-Z2A-2147, This is a manual packaging machine E 15 Basic from the premium manufacturer Webomatic, built in 2019. These small vacuum table machines deliver high packaging performance. When large products need to be packaged at high output, but floor space for a vacuum packaging machine is limited, the compact yet powerful E 15 Basic or C 15-HL packaging machines are the perfect choice! You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on all electrical parts • High-quality branded equipment at fair prices • Professional refurbishment/inspection & expert cleaning • Tested & fully functional – or your money back • Flexible options for shipping or collection • Competent advice – before and after purchase • Provision of user manuals, connection diagrams & spare parts • Safety check according to DGUV V3 Technical data: MAP (E 15 Basic) Soft-Air (E 15 Basic) Underframe Inclined insert GreenVAC Machine dimensions: 490 x 610 x 470 mm (W x D x H) Chamber size: 430 x 500 x 180 mm (W x D x H) Laedpfx Aox Drl Dol Nsa Weight: net/gross approx. 83 kg / 91 kg Pump: 21 m3/h high-performance pump, built-in Output: 2–3 cycles/min, depending on product size and desired vacuum Chamber made from high-grade stainless steel Easy operation MAP (C15, optional for E 15 Basic) Soft-Air (C15, optional for E 15 Basic) Serial number: 077-Z2A-2147 Year of manufacture: 2019 Additional information: The vacuum packer for any application. The E 15 Basic and C 15 HL packaging machines are ideally suited for vacuum sealing and packaging in kitchens, at farmers’ markets, in branch operations, or for packaging meat in hunting applications. They are also suitable for packaging sterile and sensitive medical products or electronic components, as well as for packaging banknotes. As the C 15 HL version, the table machine is equipped with the sensor-controlled WEBOMATIC C 3000 S computer and features Soft-Air and a MAP gas flushing system as standard, allowing gentle gassing and vacuum sealing of sensitive products. These functions are optionally available for the E 15 Basic tabletop machine. Food-safe PE insert plates for reducing chamber volume are included in the scope of delivery. Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by prior arrangement

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg Laedpfx Aju R Szasl Nja The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: rabljeno, Filler, dosing controller terminal, dosing device, dispenser, pneumatic vacuum control Ledpfxst Ulums Al Noaa - Manufacturer: Hamatech, dosing device pneumatic vacuum control - Type: unfortunately without type designation - Single components: see photos - Dimensions: 330/245/H145 mm - Weight: 4.8 kg

Stanje: dober (rabljeno), Leto izdelave: 2013, Motan METRONET vacuum pump 4.3 kW with pre-separator Year of manufacture: 2013 Price: €5,750.00 Contact person: Mr. Rainer Eckerle Laodpfst Sib Sox Al Nsa

Stanje: dober (rabljeno), Leto izdelave: 2006, Motan BCB 75 vacuum pump 7.5 kW with pre-separator Year of manufacture: 2006 Price: €4,550.00 Ljdpfot Sic Aex Al Neaa Contact person: Mr. Rainer Eckerle

Stanje: pripravljen za uporabo (rabljen), Fanuc A90L A04B-0813-C430 rotary vane – vacuum pump SV25 955 03 63, used, slight signs of wear, 100% operational, scope of delivery as shown in photos Lasdemq H Tmepfx Al Noa

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Leybold Type: D8B No.: 113 14 A9313000 5 8 Ledewnm Sispfx Al Neaa For further specifications, please refer to the nameplate in the image. The device is untested.