Vakuumska črpalka

BOC Edwards NXN698000

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.830 kg, Leto izdelave: 2011, Air Compressor Brand: Atlas Copco Model: GA75VSD FF Year of manufacture: 2011 Maximum allowable working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotational speed: 2975 rpm Weight: 1830 kg Dimensions: 2300 x 1100 x 2000 mm Atlas Copco Air Dryer Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Ncjdpfx Asv Nw A Aebbel Power: 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: from 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Stanje: novo, Leto izdelave: 2023, Nov, suhi, v epoksidu zalit distribucijski trifazni transformator proizvajalca SEA Italija, 1 kos 800kVA 6000 (± 2 x 2,5 %) /400V; Dyn1, IP00, letnik 2023, izgube po ecodesign 2, projektna dokumentacija in kosovni protokol, navodila. Nodpfxendn Hrs Abbecl

Stanje: dober (rabljeno), Roots blower Manufacturer: Leybold Model: RUVAC WSU 2001 Cat. No.: 11741 Pumping capacity: approx. 2000 m³/h Condition: Fully overhauled Warranty: 12 months Ncjdpfsdnv D Sex Abbel (Image similar)

Leto izdelave: 1997, Stanje: generalkompletno obnovljen (rabljeno), 2 units of spiral casing pumps in process design 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals replaced with new ones. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type (drive side): oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Discharge cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction port nominal diameter: DN 80 Discharge port nominal diameter: DN 40 Nominal pressure suction: PN 10 Nominal pressure discharge: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Insulation class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process waters Nedeiuznuepfx Abbscl - Wastewater treatment/sewage plants - Offshore and marine engineering

Leto izdelave: 2023, Stanje: novo, Fully Automatic Orbital Stretch Wrapper SPINNER 1000s Application: Packaging, bundling, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator Side: - Right-hand operation in feed-through direction General Technical Data: - Main motor power: 1.5 kW - Max. ring rotational speed: 80 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Standard Equipment: - Powered conveyor (infeed and outfeed) for automatic product feeding - Adjustable ring speed - Adjustable stretch tension with mechanical brake system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear hold-downs that press from above to secure the product during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touchscreen for machine parameter adjustment according to product requirements - Operator safety systems Optional Equipment: - Various types of conveyors - Infeed and outfeed rollers - Bubble wrap unit Technical Features: Wrapping Sizes: - Max. length: unlimited - Min. size (WxHxL): 100x18x550 mm Nsdpfx Absfuwg Iobscl Conveyor Functions: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m/sec - Load capacity: 100 kg/m Stretch Film Properties: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 60 h, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 497 kW (675,73 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 4.364 kg, okoljska temperatura (maks.): 35 °C, temperatura okolja (min.): −10 °C, vhodna napetost: 400 V, skupna širina: 2.200 mm, skupna dolžina: 5.645 mm, skupna višina: 2.530 mm, trajanje garancije: 6 meseci, moč: 244 kW (331,75 KM), vhodni tok: 392 A, ogrevalna zmogljivost: 492 kW (668,93 KM), vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, hladilna enota, kompresor, Hladilnik / Toplotna črpalka Trane Tip: CXAF150 SE XLN Leto izdelave: 2024 Delovne ure: približno 60H R454B Hladilna moč: 497 kW - 7/12°C - 35°C Ogrevalna moč: 492 kW - 50/55°C - 7°C COP hlajenje: 3,05 COP ogrevanje: 2,62 Scroll kompresorji 3/3 2 kroga Nodpow Idkuofx Abbscl EC ventilatorji – izredno nizka raven hrupa Na voljo Trane garancija do: 22/05/2026

Stanje: zelo dobro (rabljeno), Stopnja puhala Kaeser Omega 83 P po obnovi, 12 mesečna garancija, HB 1300 Njdpfx Asncd Apobbecl

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Power rating: 630 kVA Primary voltage: 20 kV Secondary voltage: 400 V Frequency: 50 Hz Voltage: 400 V / Hz Rated current: 18.2 / 24.2 A Ncjdov Szwcjpfx Abbol Weight: 2.6 t per unit Dimensions (L x W x H): 1.7 x 0.82 x 1.66 m DRY-TYPE TRANSFORMER – on U-profile base frame Two transformers available for sale. Both include an enclosure (currently disassembled, see photo). No. 1 No. 2

Leto izdelave: 1992, Stanje: rabljeno, Plate heat exchanger for milk processing Ncedpfxeh Eulge Abbol

Stanje: novo, Leto izdelave: 2024, pritisk: 8 letvica, Horizontal mitre adjustment 15°–90°15°, stepless Saw motor 5.50 kW (400 Volt) Saw blade Ø 600 mm Travel range rear stop 180 mm Working height 940–1000 mm, adjustable via feet 2 x extraction ports (top of hood and bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Rotary table made from ground nickel steel Saw head with recirculating ball guides, designed for high accuracy, long service life, and high rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed Chip flow directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment 0º/45º/90º/-45º/-60º, stepless • Incl. 2 pneumatic vertical clamps • Infinitely variable saw blade feed rate • Two-hand safety control • Adjustable rear material stop • Chip extraction device – chip extraction system • Mist spray unit for air-oil cooling Nedpfx Abjgwt S Tsbscl • Air pistol with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade Ø 600 mm • Saw blade not included in delivery! Our NC pusher system ensures your workpieces are positioned at the desired working position on our UK 600 HA 90°. A gripper clamp secures the material, and the NC control automatically positions it. Afterwards, the clamping and sawing process is activated. Positions are pre-programmed in the control system. Once the machining operation is completed by the machine, it automatically moves to the next sawing position. Depending on the workpiece, multiple parts can also be clamped and positioned simultaneously, stacked or side by side. You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH