Trenja Tiska nakup rabljenega (4.356)

Stanje: rabljeno, Leto izdelave: 2009, Premer odsesavanja: 250 mm Nazivni volumenski pretok: 3534 m³/h Redeydql Depfx Abhen Filtrirna površina: 22,6 m² Motor: 5,5 kW Briketiranje: zmogljivost ca.: 30 kg/h Premer briketa: 65 mm Motor: 3,0 kW Lokacija skladišča: Nattheim

Stanje: dober (rabljeno), Leto izdelave: 2023, obratovalne ure: 160 h, Highly sought-after used machine at a special price available Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Options at an additional charge: * Surcharge for level sensor enabling automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (Recommended for very light material such as straw; the machine becomes 13 cm wider) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Fill level monitoring option: yes CE compliant Requirements for raw material: Rjdpfx Abjgl Nlmjhjn - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length: 15 mm - Installation location temperature: tempered room at minimum +5°C - The customer must ensure their own protection against hydraulic oil loss - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may otherwise result

Stanje: novo, Leto izdelave: 2026, Stanje novo Godina proizvodnje 2026 Rjdpswiqnqefx Abhjn Inventarski broj 080147 Rok isporuke odmah, prodaja moguća u međuvremenu Zemlja porekla Slovačka Cena 26.400 € Leasing rata 504,24 € Na lageru 1 Pritisna snaga 40 t Dužina savijanja 1500 mm Ose X i Y osa Hod 100 mm Visina ugradnje 310 mm Pogonski koncept hidraulični Rezervoar za ulje 38 l Motor 6 kW Dužina 2000 mm Širina 950 mm Visina 1900 mm Težina 1800 kg Zadnji graničnik 420 mm Matrica 1 Brzina 10 mm/s Brzina povratka 12 mm/s Brzina zadnjeg graničnika 40 mm/s Tačnost prese 0,02 +/- mm Tačnost zadnjeg graničnika 0,05 +/- mm 2 ose (Y i X) Motorni zadnji graničnik sa tasterom i ručnim, finim podešavanjem sa brojačem Dubina prešanja Y i gornja mrtva tačka pomoću unapred odabranog upravljanja Međuprsten s brzim steznim polugama za stezanje gornjeg alata Gornji alat 1010/75/R0,8/105 1x835 mm + 1x835 mm podeljen Matrica 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm podeljen 2 stola za podršku lima Oprema prema CE standardima Ulje napunjeno Uputstvo za upotrebu na nemačkom

Stanje: rabljeno, Leto izdelave: 1996, Tiskovna mera: 2550 x 1350 mm. Plošče: zlato eloksirane. Skupen tlak tiska: 80 t. Specifičen tiskovni tlak: 2,8 - 4,0 kg/cm². Hidravlični cilindri: 4 x 90 mm. Odpiralna višina in hod tiska: 400 mm. Varnostna vrvica. Varnostni okvir. Upravljanje s tipko. Skupna priključna moč: 19,3 kW. Skladišče: pri dobavitelju. Rjdpexy Tl Rsfx Abhsn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.900 kg, vhodna napetost: 400 V, moč: 4 kW (5,44 KM), vrsta vhodnega toka: trifazni, Ekscentrična presa PRESSIX 40T Model 40CNV4 Serijski broj 40/2/88/03 Težina mašine: 2900 kg Frekventni regulator za promenu brzine. Promenljiva brzina 60/180 o/min Veliki broj udaraca u minuti Klizač sa 4 bronzana vodiljca Automatsko i centralizovano podmazivanje Hidrauličko otpuštanje Pneumatska jedinica kvačilo-kočnica Podesiva dužina hoda putem zupčastog prstena Balansirajući cilindri Podešavanje klizača mm 70 Visina zatvaranja mm 240 Redoxlpurjpfx Abhsn Radna površina stola mm 480 x 650x53 Otvor na stolu mm 120 Radna površina klizača mm 300 x 370 Rupa u klizaču mm 50 Snaga kW 4 Korisničko uputstvo i elektroinstalacija na engleskom jeziku. Mašina u odličnom stanju. Korišćena za male serije automatske proizvodnje. Ukupno: 6.500.000 udaraca Programi: nameštanje alata, poluautomatski rad, automatika, automatski rad, rad sa dve ruke, rad sa pedalom, obrtanje maltera u suprotnom smeru Demontaža i utovar se dodatno naplaćuju oko 1.500 EUR + PDV ako je primenljivo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, skupna masa: 4.000 kg, skupna višina: 1.600 mm, skupna širina: 4.000 mm, skupna dolžina: 5.000 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, obratovalni tlak: 7 letvica, Prodaja strojev za izdelavo aluminijastih oken Schüco. Štiriglavna stiskalnica Schüco EVM-S4, dvoglavna kotna žaga Elumatec, pantografski rezkar Rotox, kotni rezalnik z dvojnim rezilom Graule, enorezilni rezkar Graule, osnovne preše za orodja za prebijanje Schüco, različna ročna orodja, celotna proizvodnja. Rjdpfx Aeyf Idtebhjn

Leto izdelave: 1997, Stanje: dober (rabljeno), Največja širina materiala: 410 mm Rsdpfxewxpube Abhsn Največja tiskalna širina: 405 mm Največja širina izseka: 405 mm Minimalna dolžina izseka: 254 mm Maksimalna dolžina izseka: 609,6 mm Največja tiskalna hitrost: 8 fleksotiskarskih enot UV sušilnik Z 2 izsekovalnima enotama, Gapmaster Veliko dodatne opreme Stroj je v proizvodnji

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Alcolor z Baldwin hlajenjem vse pralne naprave Autoplate CPTronic Rodoyf Hh Dspfx Abhen Daljinsko upravljanje barve: CPC 1-04 podaljšana visoka zlagalna enota z IR sušilcem pribl. 94 milijonov odtisov

Stanje: dober (rabljeno), Leto izdelave: 2008, Alcolor z Baldwin hlajenjem Rodjyf Hgtopfx Abhsn Autoplate vse pralne naprave Minus različica

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 23.000 h, Funkcionalnost: popolnoma funkcionalen, Elektronski nadzor dvojnega lista EPL (Ergonomic Plate Loading): avtomatski vstavljalnik plošč z daljinsko nastavitvijo diagonalnega registra Kompletno vodilo za karton WEKO T66c naprava za nanos pudra Kersten antistatična oprema na podajalniku in izhodu Samodejna naprava za pranje gumirane odeje s krpo Dvojno velik tiskalni valj – kromiran Samodejna nastavitev debeline papirja Hlajenje Baldwin Rodpfox Sw Ucox Abhsn Števec odtisov: 95 mio.

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Rsdpfjd Nm Sisx Abhen Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Rjdpfxexfwdj Abhen Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) Rodped Nnwlefx Abhon - Special pressing units + €2,950 (net) ---

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery Rodpfxschqxxs Abhjn • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Kyori vysokohitrostna stiskalnica ANEX 40-1100 s fiksnim hodom Tehnične specifikacije Kapaciteta: 400 kN Območje za namestitev orodja (D-L x P-Z): 1100 x 600 mm Fiksna dolžina hoda: 13 mm (druge dolžine hoda na zahtevo) Hitrost pri maks. 180 kg teže zgornjega orodja (druge teže zgornjega orodja na zahtevo) 13 mm hod: 1050 taktov/min (SPM) Priključna moč: 76 kVA Moč servomotorja: 47 kW Zaprtje orodja (višina): 250 – 300 mm (po meri) Nastavitev drsnika: 50 mm Širina vstopa traku: maks. 200 mm Višina vstopa traku: 90 – 150 mm Dodatne informacije · Zelo dinamična, ročična zasnova s fiksnim hodom Rjdpsydvgtefx Abhjn · Sodobno, visoko zmogljivo krmiljenje stiskalnice PCS100 v modularni izvedbi · Zelo učinkovita pogonska tehnologija za zmanjšan CO2 odtis · Položaja spodnje mrtve točke in kota ročične gredi se ne spreminjata · Pripravljena za Industry 4.0 preko OPC-UA vmesnika · Stiskalna sila · Integrirano spremljanje orodja · Integriran servo pomik PV100

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine available immediately (ex works Neckartailfingen) Demo machine with approx. 10 operating hours Your benefits: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Includes control cabinet with timer operation The press is manually activated and runs until the set time on the timer (e.g. 4 hours) has elapsed. Afterwards, the press switches off automatically. Technical Specifications: Briquette dimensions: approx. 35 x 35 mm (square) Briquette length: 5–40 mm *depends on material Throughput capacity: up to 25 kg/h *depends on material Machine dimensions (approx.): 137 x 75 x 148 cm (Length x Width x Height) Machine weight: approx. 250 kg Silo holding capacity: approx. 250 liters Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw Material Requirements: Rsdpfxjfci D Ao Abhjn – Wood shavings and dust less than 15 mm in length – Moisture content less than 18% ATRO – Sand, stones, metals, and minerals increase wear --- Optional extras for additional charge: – Timer function + €490 net Machine is started manually and automatically switches off after the set time X. – Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW !!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (Delivery time approx. 8 weeks) ---

Stanje: rabljeno, Stroj za vroče žigosanje in reliefno tiskanje Kolbus PE 70 z avtomatskim podajalnikom in predhodnim transportnim trakom. Rodpfxeydfwzj Abhsn

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2101177, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, Instalacja do pelletowania do drewna / słomy / siana / wełny owczej / pasz - nadal jest w eksploatacji - możliwość obejrzenia - Zasobnik surowca z podajnikiem do młyna tnącego odpowiedni do zrębków drzewnych ≤ G30 + taśmociąg - Młyn tnący 22,5 kW z zapasowymi nożami - Zasobnik materiału 4 m³ z podajnikiem taśmowym serii LP - Prasa do pelletu LP22 (zintegrowane centralne smarowanie, pompa wodna oraz monitoring temperatury zapewniają maksymalną wygodę obsługi) - Przesiewacz z podajnikiem do LP22 (w tym czujnik poziomu do BigBag i kabel czujnika do podłączenia do prasy LP22) - 6x stojak BigBag Vario 1,5 m³ - 20x produkcyjnych BigBagów na pellet - Matryce do peletu drzewnego w rozmiarach 6x19 mm - 6x24 mm - Matryce do peletu ze słomy i siana 8x25 mm Rodpexwzkiefx Abhjn W celu uzyskania dalszych informacji prosimy o kontakt.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Celoten paket XEROX je delujoč, vse stroje je vzdrževal FSMA pri Xeroxu. Rsdpfxeydp Ttj Abhon

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stiskalnica za žemljice Fortuna Automat A 3 H Stroj za deljenje in oblikovanje testa Stiskalnica za žemljice Fortuna Automat, velikost 3 Čiščenje glave nazaj Robustna tehnika S 3 oblikovalnimi ploščami Priključek 400V, vtič 16A-CEE Mere: 720 x 800 x 1510 mm Rabljeni stroj Možnosti: Servisni paket Vzdrževalna pogodba Rsdpfeygdcujx Abhen Uvajanje in zagon Dostavna storitev Na zalogi imamo še veliko drugih stiskalnic za žemljice!

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3928 A, delovna širina: 250 mm, Oprema: dokumentacija / priročnik, Moč motorja: 30 kW Opremljeno z: Hnebni Iow A A E Is Rp Tot 1+1 žagi 1+1 rezkalna skupina 1+1 vrtalna skupina Maksimalna dolžina: 1000 mm Maksimalna širina: 250 mm Maksimalna debelina: 50 mm Rjdpfx Aoxix Tfsbhon dvojna čelilnica, dvojni vrtalni stroj, korak za korakom

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 500 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 02/2027, Stroj za deljenje in oblikovanje testa Fortuna Automat A 3 H + z izklopom oblikovanja, čiščenje glave nazaj, popolnoma obnovljena delilna glava, z NOVIM rezilom iz nerjavečega jekla, vnos testa do 2400 g, robustna tehnika, priklop 400V, vtikač 16A-CEE, mere: 720 x 800 x 1510 mm. Rabljena, obnovljena naprava. Kakovost iz strokovne delavnice! Izkusite več kot 35 let izkušenj! Možnosti: - Inox podstavek - Nov oblikovalni krožnik - Servisni paket - Servisna pogodba - Uvajanje in zagon - Dostavna storitev Rjdpfoygcw Rex Abhon Na zalogi imamo veliko izbiro delilnikov testa!

Stanje: rabljeno, Leto izdelave: 1991, številka stroja/vozila: 041-024/39, Tiskovna sila: 63 t Izrast: 360 mm Hod: 500 mm Vgradna višina: 800 mm Rodpevai R Tsfx Abhon Pritrdilna površina mize pribl.: 750 x 560 mm Pritrdilna površina batnice pribl.: 630 x 400 mm Delovna hitrost: 60 mm / s Hitrost povratka: 380 mm / s Skupna priključna moč: 12,6 kW Dimenzije D x Š x V: 1.200 x 1.950 x 3.080 mm Teža stroja pribl.: 4,3 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1214, največja širina izdelka: 250 mm, delovna širina: 240 mm, višina izdelka (maks.): 381 mm, maks. debelina aluminijaste pločevine: 2 mm, širina valja: 250 mm, premer valja: 700 mm, leto zadnje generalne obnove: 2023, vrsta vhodnega toka: trifazni, notranji premer: 76 mm, širina folije: 250 mm, ogrevalna zmogljivost: 5 kW (6,80 KM), skupna masa: 7.883 kg, obratovalna hitrost: 2.916 mm/s, skupna višina: 1.970 mm, skupna dolžina: 7.160 mm, skupna širina: 1.920 mm, Nilpeter FA2500 je dobro poznan ozko-sledni flekso-tiskarski stroj, zasnovan za visokokakovostno proizvodnjo etiket in fleksibilne embalaže. Nilpeter je globalno priznani proizvajalec z dolgoletno tradicijo inovacij na področju flekso tehnologije ter dobavlja zanesljive in učinkovite stroje pretvornikom po vsem svetu. Serija FA je posebej cenjena zaradi robustne konstrukcije, natančnosti tiska in vsestranskosti na različnih materialih. Ta tiskarski stroj Nilpeter FA2500 za etikete je konfiguriran z 8 barvnimi flekso-tiskarskimi enotami, ki omogočajo zahtevne in visokokakovostne tiskarske naloge. Z maksimalno širino sledi 260 mm je stroj odličen za proizvodnjo etiket, kjer sta potrebni preciznost in konstantna kakovost tiska. Fleksotisk je v industriji etiket zelo razširjen zaradi učinkovitosti, kratkih časov priprave ter sposobnosti tiskanja na številne materiale. Stroj je opremljen z električnimi in UV sušilnimi sistemi, ki omogočajo učinkovito sušenje barve in stabilne produkcijske hitrosti. UV sušenje se običajno uporablja za doseganje vrhunske kakovosti tiska in obstojnosti, zlasti pri zahtevnejših etiketnih aplikacijah. Kombinacija različnih tehnologij sušenja zagotavlja prilagodljivost pri izbiri barv in proizvodnih zahtevah. Redpfx Abjyf E Tfohjn Poleg tega je FA2500 opremljen s 3 izsekovalnimi enotami, kar omogoča linijsko obdelavo in dodelavo. Izsekovanje je ključna funkcija pri proizvodnji etiket, saj omogoča dodelavo tiskanega materiala neposredno na stroju, kar izboljšuje delovni proces in zmanjšuje potrebo po dodatni zunanji opremi. Skupno gledano je Nilpeter FA2500 preverjen flekso tiskarski stroj za etikete, primeren za pretvornike, ki iščejo zanesljivo rešitev za visokokakovostno proizvodnjo etiket v ozko-slednem segmentu.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z50009537, Leto izdelave: 2018, obratovalne ure: 167 h, skupna dolžina: 50 mm, skupna višina: 81 mm, skupna širina: 57 mm, vrsta vhodnega toka: Enosmerni tok, skupna masa: 41 kg, vhodna napetost: 220 V, širina mize: 305 mm, dolžina mize: 305 mm, For sale well below market price: a barely used (166 operating hours) professional Replicator Z18 3D printer. • Extra-large print volume: 30.5 x 30.5 x 45.7 cm • Supported by the new, user-friendly MakerBot Replicator 3D Printing Platform • Cloud-based system with app support • MakerBot Replicator Smart Extruder, advanced motion control, and axis design • Integrated camera and diagnostics, assisted calibration • Large build volume enables rapid prototyping and model production • 11% larger print capacity compared to MakerBot Replicator 2 • Build volume: 25.2 x 19.9 x 15.0 cm (7,522 cm³) • Create lifelike objects easily and quickly • On-demand printing capability • 100-micron resolution—print paper-thin layers • Produce professional-quality, high-resolution prototypes and complex models • Smooth-touch surface finish—no post-processing required • Generate realistic prototypes and models for presentations • 3.5” color LCD display • Intuitive onboard user interface for a rich user experience • Access your personal library and preview 3D files directly on the machine Redpfjxt Er Aox Abhjn • Integrated utility for printer setup and maintenance • MakerBot Replicator Smart Extruder (print head)—easy to replace • Detects filament depletion and automatically pauses printing • Sends status updates to MakerBot Desktop and MakerBot Mobile app • Built-in camera for print monitoring and sharing on MakerBot Thingiverse or social networks • Mobile control