Transportna Tehnika nakup rabljenega (32.086)

Stanje: rabljeno, Višina valjčne proge ~ 910 mm Gujdpszcganjfx Aa Uoc Dolžina 4.600 mm Širina valjev 450 mm Masivna valjčna proga z omejevalcem.

Leto izdelave: 2026, stanje: novo, DM flat conveyor belt type FB-700 without supporting structure Gujdeyhznhepfx Aa Uec for conveying bulk materials Conveyor length: 6,000 mm Belt width: 650 mm Welded and bent structural steel construction, laser-cut Base frame powder-coated in RAL 5015 Modular conveyor frame construction / segments available in transportable lengths. Frame construction can be extended or shortened at any time. Return roller construction (idler rollers) in the lower run, axle Ø60/15 mm Roller station spacing approx. 500 mm (customizable) Narrow roller spacing in the feed area Drive drum and deflection drum made of welded and machined S235 steel Ø220 x 700 mm, crowned and turned, shaft fixed with bearing units. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/s Connection: 400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by a qualified electrician) Motor mounted on right side in conveying direction, pull configuration. Bearing locations equipped with robust UCF flange bearings incl. grease fittings. Rubber conveyor belt DM EP250/2 3+1.5 top cover Chevron profile 17 mm high x 650 mm wide Joint area without profile, endless hot-vulcanized

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angled conveyor belt including mobile underframe Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at the bend: 40 degrees each Feed height (measured from floor): 500 mm Discharge height: 1,600 mm Conveyor belt width: 700 mm Extremely robust aluminum construction, heavy-duty version! PU conveyor belt including cleats and corrugated sidewalls Drive: 0.55 kW motor (adjustable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and electrical components ready for connection, motor control optional Corrugated sidewalls: 80x50 mm T-60 cleats, short pitch 2-ply, particularly cross-rigid Corrugated sidewalls, cleats, and endless belt high-frequency welded In the bend area, the belt is guided on both sides by four hold-down rollers each. The belt is designed with a 100 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width: 400 mm, calculated as follows: (top view) Transverse layout 100+50+400+50+100 mm Demonstration unit - Available immediately! - Can be inspected under power All prices are net prices plus 19% VAT All information subject to change, while stocks last! Godpoyt Ia Dsfx Aa Uouc

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Aluminium Z-shape conveyor belt with substructure including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor length (measured on the ground): 3,500 mm Height of the horizontal section: 400 mm Design: Aluminum construction design - Double-reinforced profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller S235 steel, welded and machined Ø100x720 mm, cambered and turned, shaft fixed with pillow block bearings Drive: Direct-mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with waved PU edge in petrol, matte, AS, especially cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. waved side edges, 50 mm high, 25 mm wide, high-frequency welded Gsdpfx Ajyhzhnea Uouc 34 pcs. T40 cleats centrally positioned, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a borderless zone of 70 mm on each side. Due to the waved side edges, the usable width of the conveyor belt is reduced: Usable width: 500 mm, comprised as follows: (Top view) Lateral arrangement 70+25+5+500+5+25+70 mm Belt guidance via PVC guide strip on running surface profile - 10x6 mm - including cutout in the discharge plate - including slide bushings in the drive and return rollers

Leto izdelave: 2026, stanje: novo, Robust steel construction – designed for continuous operation The base structure consists of a heavy-duty construction steel frame, manufactured from laser-cut, bent, and welded components. The surface is finished with high-quality powder coating in RAL0208. Modular Design: Our conveyor belt frames are available in transportable sections. This makes the system: - Easy to transport and assemble - Extensible or retractable at any time - Ideally suited for later modifications or system adjustments Conveying Technology & Troughing Idlers The troughing roller assembly on the return side is designed for smooth and reliable operation: - Shaft Ø: 60/15 mm - Roller station spacing: approx. 500 mm (customisable) - In the loading area, a narrower roller spacing can be provided on request for increased load capacity Drive & Rollers The drive roller and tail roller are made of S235 steel, welded and precisely machined: Guodeyhznnopfx Aa Uec - Ø 220 × 700 mm, crowned surface - Shaft secured with tension bearings - Bearing points with heavy-duty UCF flange bearings incl. grease nipples Drive unit: - Gearmotor: Hydromec worm gear, 1.1 kW - Belt speed: approx. 1.15 m/s - Connection: 400V / 50 Hz, protection class IP54 - Drive unit pre-wired up to the motor terminal box (Commissioning must be performed by a qualified electrician) - Motor mounted on the right in conveying direction, in pulling configuration Conveyor Belt A durable, industrial-grade belt is used: - Type: DM EP250/2, 3+1.5 cover - Chevron profile, 17 mm high, 650 mm wide - Splice area without profile - Endless hot vulcanised Custom Options & Accessories (as required) Thanks to its modular construction, all components can be precisely tailored to your process, for example: ✅ Special lengths & widths ✅ Side plates / wavy edges (for lateral guidance and increased conveying stability) ✅ Infeed/receiving plates (wear-optimised, gentle on materials) ✅ Loading/infeed hoppers (for clean bulk feeding) ✅ Discharge plates / chutes ✅ Cleated profiles / alternative belt qualities ✅ Adjustment of roller spacing & idler geometry ✅ Special paint coatings / customer-specific designs

Leto izdelave: 2021, stanje: delavnici obnovljeno (rabljeno), Aluminium angle conveyor for shredder 2000mm horizontal + 2000mm inclined section Dimensions: approx. 3000 x 420 x 105mm Aluminium construction: Conveyor belt width with wave edge PVC conveyor belt Belt color: green, 2-ply, highly cross-stable, endless welded with stepped splice * Antistatic due to threads woven into the running side Drive: Motor approx. 0.55 kW, speed 0.3 m/sec * Frequency converter controllable Gujdsff Hgbopfx Aa Uec Connection: 220/400V, 50Hz, protection class IP54 Drive, motor control optional

Leto izdelave: 2020, stanje: novo, Aluminum flat conveyor belt with substructure Godpfx Aasgggkde Ueuc Working height 900 mm, height adjustable via machine feet 3000 mm flat Dimensions: approx. 3000 x 500 x 105 mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T-cleats. Conveyor belt green, 2-ply, especially cross-rigid, endless welded with stepped joint * Antistatic due to threads woven into the running side Drive: Motor approx. 0.18 kW, speed 0.4 m/sec. * Controllable via frequency inverter Connection 220/400V, 50Hz, protection class IP54 Drive, motor control optional

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021052701, Aluminium flat conveyor belt without substructure Conveyor belt length: 6000 mm Drive roller: knurled Return roller: crowned and turned PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue, FDA-compliant according to EU10/2011 Belt width 500 mm (external) Wave edge welded on both sides, 40 mm high T-30 cleats (61 pcs), 200 mm spacing * Antistatic due to threads in the underside fabric Endless welded with stepped finger joint Food safety certificate included Godpfjg D T N Hex Aa Ujuc V2A stainless steel support plate, full coverage Drive: Motor approx. 1.1 kW – horizontally mounted * Optional control via frequency inverter Connection 220V/

Leto izdelave: 2021, stanje: novo, Aluminum angle conveyor belt including mobile subframe Gsdpfxshh A Uqe Aa Usuc Horizontal section: 1500mm (adjustable) Inclined section: 2500mm (adjustable) Angle at the bend selectable: 30°, 35°, 40°, or 45° Polyamide swivel castors with locking brakes Conveyor belt width: 400mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt incl. carriers and wave edge Drive: Motor 0.25 kW (adjustable), speed 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply, extra cross-stable Our core competence is delivering exactly what the customer truly needs. We work together with our customers to develop custom, application-specific solutions and supply appropriate systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator.

Leto izdelave: 2020, stanje: novo, Aluminum flat conveyor belt with substructure 3000 mm flat Aluminum construction: - Conveyor belt width between shaft edges: 400 mm - Smooth PVC conveyor belt - Belt is green, 2-ply, especially cross-rigid, endless welded with stepped joint * Antistatic due to threads in the running surface fabric - Drive: Motor approx. 0.36 kW, speed 0.5 m/sec * Controllable with frequency inverter Gusdpfxeff Hffe Aa Ujc - Connection: 220/400V, 50Hz, protection class IP54 - Drive and motor control optional

Leto izdelave: 2023, stanje: novo, From overproduction, 9 units available Gsdpfxjff Hgae Aa Ujuc Dimensions: approx. 3000 x 300 x 105 mm Aluminum construction: Conveyor belt width without corrugated edge Smooth PVC conveyor belt Green, 2-ply conveyor belt, particularly cross-rigid, endless welded with stepped joint * Antistatic due to threads in the running surface fabric Drive: Motor approx. 0.18 kW, speed 0.3 m/sec. * Speed adjustable via frequency inverter Connection 220/400V, 50Hz, protection class IP54 Drive and motor control optional

Leto izdelave: 2019, stanje: kot nova (razstavni stroj), Aluminum incline conveyor 35° including support frame Dimensions: 1500 + 3055 x 400 mm Gjdpfx Aaod Dzddj Uouc * Optional with magnetic deflection roller at the end of the conveyor belt. * Custom designs available in all configurations.

Leto izdelave: 2020, stanje: novo, Aluminium incline conveyor belt with mobile subframe Length: 4000 mm Dimensions: approx. 4000 x 1020 x 105 mm Aluminium construction: Belt width between shaft edges: 800 mm PVC conveyor belt with cleats Belt: green, 2-ply, especially cross-stable, endless welded with stepped joint * anti-static due to threads in the running side fabric Drive: Motor approx. 1.10 kW, speed 1.2 m/sec Gedpfx Asff Hfpsa Ujuc * controllable via frequency converter Connection: 220/400V, 50Hz, protection class IP54 Drive and motor control optional

Leto izdelave: 2022, stanje: novo, Aluminum flat conveyor belt with substructure Dimensions: approx. 4000 x 300 mm Aluminum construction Full-area support plate Drive: Gear motor 0.18 kW GEMOTEG Connection 220/400V, 50Hz, protection class IP54, drive motor control optional 4 pcs. machine leveling feet, conveyor belt height (top edge) 400 mm PVC conveyor belt EM 10/2 0+12 PVC green, hard cover Endless welded with stepped finger joint Green fabric reinforcement Carrying side equipped with 12 pcs. centrally welded PVC cleats T40, spacing approx. 508 mm Gedpfx Aasht U H Ho Ueuc Carrying side with 2 pcs. edge-aligned, welded corrugated sidewalls with fabric reinforcement, green, approx. 40 mm high, approx. 35 mm wide. Arrangement transverse +35-5+220-5+35 mm

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Aluminum angle conveyor with substructure Horizontal section: 3,000 mm Guodpfxsi Igzfo Aa Ujc Inclined section: 5,000 mm Angle of inclination at bend: 35°, 40°, or 45° Total conveyor length: - Discharge height: - Height of horizontal section: - Conveyor belt width: 600 mm (extendable) Drive roller + return roller Ø150x620 mm, S235 steel, welded and machined Steel return roller at bend mounted and crown-turned Reinforced aluminum profile frame 135x45 mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge, petrol matt Drive: 1.1 kW motor, speed 0.3 m/sec Connection 230/400V, 50 Hz, protection class IP54 Fully wired drive unit with motor 2 pcs. corrugated sidewalls 80x45 mm 39 pcs. T60 carriers, spacing 401 mm 2-ply, extra cross-stable Usable width 470 mm, calculated as follows: Transverse arrangement -70+45-50+470+50+45-70 mm

Leto izdelave: 2019, stanje: novo, Aluminium flat conveyor belt without substructure 3000mm flat Dimensions: approx. 3000 x 500 x 105mm Aluminium construction: Gsdpsff Hf Defx Aa Usuc Conveyor belt width incl. corrugated edge 500mm Conveyor belt green, 2-ply, especially cross-stable, endless welded with stepped joint * Antistatic due to threads in the running side fabric Drive: Motor approx. 0.25 kW, speed 0.3 m/sec. * Controllable with frequency converter Connection 220/400V, 50Hz, protection class IP54 Drive and motor control optional

Leto izdelave: 2021, stanje: novo, Complete solution for the transport of bulk materials as well as demetallization of magnetic metal contaminants. Aluminum incline conveyor belt including substructure Incline start area at ground level (adjustable) Discharge height: 1800 mm (adjustable) Construction: height-adjustable Structure includes suspension for overhead magnetic separator DMPM1200 Conveyor belt width: 500 mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt including carriers and wave edge Drive: 0.25 kW motor (adjustable), speed 0.3 m/s Power supply: 220/240V, 50Hz, protection class IP54 Drive and components ready for connection, motor control optional 6x height-adjustable machine feet for alignment Wave edge: 40x35 mm T-20 cleats - 400 mm spacing 2-ply construction for exceptional transverse stability Our core competence lies in supplying customers exactly what they need. We work hand in hand with our clients to develop customer-specific, individual solutions and provide tailored systems from our own production. Feel free to contact us by phone to find the right solution for your application. Godpehh A Iyefx Aa Usuc Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overhead magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overhead magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnet, filtration systems.

Leto izdelave: 2021, stanje: novo, Aluminium angle conveyor belt including substructure Horizontal section: 2000 mm (adjustable) Inclined section: 2200 mm (adjustable) Angle at joint freely selectable: 30°, 35°, 40°, or 45° Conveyor belt width: 500 mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt including cleats and wave edge Drive: Motor 1.1 kW (adjustable), speed 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and accessories prewired, motor control available as an option 6x adjustable machine feet for alignment Wave edge: 40x35 mm (adjustable) T-20 cleats – 400 mm spacing (adjustable) 2-ply, especially cross-stable Our core competence is delivering precisely what the customer really needs. We work closely with our customers to develop customised, individual solutions and deliver suitable systems from our own production. Gujdpfjhh A Thjx Aa Usc Feel free to contact us by phone to find the right solution for your application. Belt conveyor, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator

Leto izdelave: 2021, stanje: novo, Aluminum angled conveyor belt including mobile support frame Horizontal section 1500 mm (adjustable) Inclined section 2500 mm (adjustable) Gjdpfx Ashh A U Hsa Usuc Angle at bend freely selectable: 30, 35, 40, or 45° Polyamide swivel casters with locking brakes Conveyor belt width 400 mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt including carriers and wave edge Drive: motor 0.25 kW (adjustable), speed 0.3 m/sec Connection 220/240V, 50Hz, protection class IP54 Drive and other components ready to connect, motor control optional 6x adjustable machine feet for leveling Wave edge: 40x35 mm (adjustable) T-20 cleats – 400 mm spacing (adjustable) 2-ply, especially laterally stable Our core competence is delivering exactly what the customer really needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. B2hd9kmmdn Feel free to contact us by phone as well to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Leto izdelave: 2022, stanje: novo, Complete solution for conveying bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angle conveyor belt including supporting structure Horizontal section: 2,500 mm (customizable) Inclined section: 4,000 mm (customizable) Bend angle steplessly adjustable Feed height: horizontal (customizable) Discharge height individually adjustable Construction: height-adjustable (movable) Conveyor belt width 600 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. Gsdpfx Aasilg U Ej Ujuc PU conveyor belt with cleats and corrugated sidewall Drive: 1.1 kW motor (customizable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive supplied ready for connection, motor controller optional 8x adjustable machine feet for alignment Corrugated edge: 50x30 mm T-40 cleats - 300 mm pitch 2-ply for maximum cross-stability We always have various systems of this type in stock. The lead time for a customized system is currently around 2–3 weeks, depending on the production effort. Our core competence lies in supplying customers exactly what they really need. We work together with our customers to develop customized, individual solutions and supply the corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Leto izdelave: 2022, stanje: novo, Aluminum Z Conveyor Belt incl. Mobile Base Frame Horizontal section: 800 mm (adjustable) Inclined section: 2,000 mm (adjustable) Second horizontal section: 800 mm (adjustable) Angle at bend: variable, infinitely adjustable Infeed height: horizontal (customizable) Discharge height: individually adjustable Conveyor belt width: 600 mm (adjustable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt incl. cleats and waved edge Drive: Motor 0.55 kW (adjustable), speed approx. 0.3 m/sec Connection: 220/240 V, 50 Hz, protection class IP54 Drive and other components ready for connection, motor control optional 8x adjustable machine feet for alignment Waved edge: 50x25 mm T-50 cleats - 400 mm pitch 2-ply, especially cross-stable Guedpfek S D Ntjx Aa Uec Current delivery time for customized units is approx. 3-4 weeks, depending on manufacturing requirements. Our core competence is delivering exactly what the customer really needs. We work together with our customers to develop tailored, customized solutions and manufacture the corresponding equipment in-house. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic band separator.

Leto izdelave: 2019, stanje: kot nova (razstavni stroj), Aluminium flat conveyor belt incl. 4 suspension points Dimensions: 3000 + 520 x 105 mm Conveyor belt width: 400 mm PVC conveyor belt incl. cleats and wave edge Gedpfxjd Ra Trj Aa Ueuc * Optional with magnetic deflection roller at the end of the conveyor belt. * Optional with supporting frame * Custom-made versions in all designs possible.

Leto izdelave: 2020, stanje: novo, Aluminium flat conveyor belt with substructure Working height: 900mm, height adjustable via machine feet 2000mm flat section Dimensions: approx. 2000 x 500 x 105mm Aluminium frame construction: Conveyor belt width with welded wave edge PVC conveyor belt with T-profile cleats. Green conveyor belt, 2-ply, especially cross-rigid, endless welded with stepped joint Gjdpfx Aaogggkle Ujuc * Antistatic due to threads in the running side fabric Drive: Motor approx. 0.18 kW, speed 0.4 m/s * Controllable via frequency inverter Connection: 220/400V, 50Hz, protection class IP54 Drive and motor control optional

Leto izdelave: 2019, stanje: kot nova (razstavni stroj), Aluminium flat belt conveyor including 4 suspension points Dimensions: 6000 + 520 x 105mm Belt width: 400mm Gsdpfxsd Ra Tto Aa Ujuc PVC conveyor belt including cleats and wave edge * Optionally available with a magnetic tail pulley at the end of the conveyor belt. * Optionally available with subframe. * Custom-made versions in all configurations possible.

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Height of the horizontal section: 200 mm (top edge) PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Belt width: 500 mm 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Guedpfjh Eld Eex Aa Ujc Endless welded with stepped finger joint 40 mm wave edge, high-frequency welded on both sides * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54