Elektromotor 4/6 kW 720/1440 vrt / min

Sintec DM1 132MX8/4

Leto izdelave: 1997, Stanje: generalkompletno obnovljen (rabljeno), 2 units of spiral casing pumps in process design 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals replaced with new ones. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type (drive side): oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Discharge cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction port nominal diameter: DN 80 Discharge port nominal diameter: DN 40 Nominal pressure suction: PN 10 Nominal pressure discharge: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Insulation class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industries Hfodpeiuznuefx Af Tsb - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, dolžina pomika po osi Y: 6.000 mm, Tipper bed for logs up to 6 m long. Hfodpfer Iig Dex Af Tjb Available from September 2024.

Stanje: rabljeno, prevoženi kilometri: 30.800 km, moč: 150 kW (203,94 KM), prva registracija: 05/2023, vrsta goriva: dizel, skupna masa: 2.510 kg, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: filter saj, Prodaja se dobro ohranjen Audi Q5 z zelo dobro opremo (podrobnosti o opremi na voljo preko zasebnega sporočila). Vozilo prodajamo zaradi družinskega naraščaja. Stanje je brezhibno, ogled je možen kadarkoli. Za dodatne informacije prosim pišite preko zasebnega sporočila. Hfjdpfx Afjxum T Re Teb

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring Hsdeg Ezarepfx Af Tefb - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Hsdpfx Afjrigxye Tofb Machine tested, in original condition

Stanje: rabljeno, Leto izdelave: 1993, obratovalne ure: 48.000 h, Samozlagalni spiralni zamrzovalni trak, Frigoscandia FRIGoBELT – zamenjan leta 2010 Hfsdpfx Asvf Iuzof Tjb Višina členkov: 80 mm / Največja višina izdelka: 65 mm / Neto širina traku: 580 mm / Širina traku med vstopnimi pokrovi: 535 mm / zlaganje traku s 24 nivoji / Mreža traku: M13-1.5 / 24 nivojev (možnost povečanja števila nivojev) Razpored: N-S CCR Uparjalniki SS/AL / število tuljav: 1 / število ventilatorjev: 2 standardna – zamenjana leta 2011 Sistem za CIP čiščenje traku Ohišje: W/W (bel notranji in bel zunanji del) – zamenjano leta 2010 Veriga, kroglice in vodila iz plastike zamenjani leta 2017 Hladilno sredstvo: amonijak / hladilni medij: R717 Maksimalna skupna odvedena toplota: 252 kW/h Servis ProCare do leta 2018 Razpoložljiva dokumentacija Stroj je prenehal obratovati leta 2018 Možnost razstavljanja in priprave za transport za doplačilo

Stanje: novo,

Stanje: rabljeno, Hydraulic power unit, hydraulic pump, universal power pack - Manufacturer: H+L, hydraulic power unit for hydraulic punch - Type: DK52 1-6-250P-391K Hedpsf Tdt Isfx Af Tofb - Motor: Junginger 5.5 kW / 1455 rpm - Pressure gauge: up to 250 bar - Accumulator: Hydac 2.5 liters - Hydraulic tank / filter / valves: see images - Dimensions: 540/630/H1210 mm - Weight: 198 kg

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. Hfedpfoftm Hrjx Af Tsb *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: novo, Load capacity: 5.0 t Workpiece diameter: 100 – 2500 mm Total power requirement: 2 x 0.37 kW Max. payload drive unit: 2500 kg Max. payload idler unit: 2500 kg Table rotation speed: 100 – 1000 mm/min Wheel diameter: 250 x 140 mm Machine weight: approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired) Hodpfxogvwgco Af Tofb