Električni motor 30 kW 2970 vrt/min

Aerzen WEG 200L-02

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Lrodsrigxyspfx Al Njk Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): Ledpfog Ezarjx Al Nsrk 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M-900iA/260L R-30iA, nosilnost: 260 kg, doseg roke: 3.100 mm, proizvajalec krmilnikov: Fanuc, model krmilnika: R-30iA, proizvajalec programirnih enot: Fanuc, Oprema: dokumentacija / priročnik, IRS Robotics® obnovljen industrijski robot. 100 % popoln in popolnoma delujoč: robotska roka, krmilnik, vsi kabli in ročna konzola (teach pendant). Vključuje našo garancijo in podrobno oceno po 77-točkovnem protokolu, ki jo opravijo naši notranji strokovnjaki za robotiko. Znamka: FANUC Tip: M-900iA/260L Krmilnik: R-30iA Nosilnost: 260 kg Doseg: 3,1 m Ljdpfep T Umqsx Al Nork Splošni namen: Dvigovanje težjih bremen, dolg doseg Masa robota: 1800 kg Dobavni rok: Po dogovoru IRS Robotics® obnovljeno: 77-točkovni protokol – popolnoma preizkušen na naših preskusnih mizah, novo olje/mast, nove baterije, temeljito očiščen, prebarvan v želeni odtenek po RAL lestvici. Vključuje meritve natančnosti (ponovljivost, natančnost, zračnost). O podjetju: Naše vsakodnevno zanesljivo poslovanje je dobava obnovljenih industrijskih robotov priznanih blagovnih znamk: ABB – KUKA – ABB – YASKAWA. Ustanovljeni leta 2002. Pošiljamo po vsem svetu!

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. Ljdpfx Aloftm Hrj Nork *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Loher frame motor 90 kW – 1500 rpm. B3 configuration. Shaft diameter 80 mm. Lsdpouy S Tzsfx Al Nerk

Leto izdelave: 2023, obratovalne ure: 11 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: MA0144_1922, Showroom unit: Screw Compressor Kaeser SX 8 (10 bar) with SIGMA Control 2 Year of manufacture: 2023 Operating hours: 1 h Technical data: Free air delivery at 7.5 bar: 670 l/min Motor power: 5.5 kW Electrical connection: 400 V / 3 / 50 Hz Dimensions (W x D x H): 590 x 632 x 970 mm Weight: 155 kg Compressed air connection: G 3/4" Lrsdpfx Aoh Ey Rcel Nsk Sound pressure level: 64 dB(A) Visit our showroom in Erlangen. On over 450 sqm of exhibition space you will find a large selection of used and new compressors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: rumena, stanje pnevmatik: 90 odstotek, stanje pogona: 90 odstotek, število sedežev: 1, številka stroja/vozila: KM&EW144, Oprema: hidravlika, kabina, Opis proizvoda Lrsdpfx Aljum Eiuo Nok Rabljena oprema za hvatanje trupaca Proizvođač: Caterpillar Model: CAT 966C Rad na dizelski motor Stroj se prodaje u viđenom stanju Za više informacija, molimo kontaktirajte: VIJAY JPN Industrial Trading Pte Ltd 13A Pandan Crescent, Singapur 128478

Stanje: novo, številka stroja/vozila: 1900040028, dolžina transportnega traku: 1.700 mm, širina transportnega traku: 440 mm, hitrost transportnega traku: 57 mm/s, moč: 0,18 kW (0,24 KM), vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, Voran conveyor belt 1,700 x 440 mm Lredpfxstv E Dij Al Nsk FDA compliant

Stanje: novo, Leto izdelave: 2021, A new Nicholson A6/35” 5-arm machine with roll drive is being offered for sale. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Lrodpfxswt T Uno Al Nok

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), HM saw blade side grinding machine Petschauer model FL600 Ledpfx Aljd Emc Us Nork