Transmig 400 nakup rabljenega (19.250)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 550 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: siehe Bildmaterial, skupna dolžina: 4.500 mm, skupna višina: 1.400 mm, skupna širina: 1.550 mm, vrsta vhodnega toka: trifazni, višina izdelka (maks.): 200 mm, višina izdelka (min.): 50 mm, dolžina izdelka (min.): 400 mm, največja dolžina izdelka: 600 mm, največja širina izdelka: 400 mm, širina izdelka (min.): 250 mm, vhodna napetost: 400 V, delovna višina: 800 mm, Ponujamo to skoraj novo proizvodno linijo Smipack / Saropack, ki je sestavljena iz GHS1000/400 in WS 6000 CS ter T450 (transportni trak/ročno varilna postaja/skrčljivi tunel). Vse komponente so letnik 2022. Zadnje vzdrževanje izvedeno 09/2025. Skrčljivi ovijalec WS 6000 CS Priključek: 3 + N + PE Napetost: 380–415 V Frekvenca: 50–60 Hz Poraba energije: 3350 W Tok: 14,5 A Transportni trak GHS 1000/400 Priključek: 1 + N + PE Napetost: 220–240 V Frekvenca: 50–60 Hz Poraba energije: 370 W Tok: 1,8 A Skrčljivi tunel T450 Priključek: 3 + N + PE Napetost: 380–415 V Nsdpoytcc Hofx Ah Iewd Frekvenca: 50–60 Hz Poraba energije: 8000 W Tok: 11,5 A Za dodatna vprašanja ali več informacij nam prosimo pišite sporočilo ali nas pokličite.

Stanje: novo, Number of sanding units: 1 Profile width: 390 mm Maximum profile height: 390 mm LÖWER timber construction sanding machine HBS 400 ub Single-sided belt sander, sanding from below, for sanding beams, glulam, and other bar-shaped wooden workpieces. Includes reverse operation for sanding in both directions, forwards and backwards, which results in substantial time savings when sanding three or four sides of a workpiece. Constant working height allows for the use of roller conveyors in front of and behind the machine Max. working width: 390 mm Workpiece thickness: 10 - 390 mm Abrasive belt: 420 x 1800 mm Pneumatically controlled sanding belt oscillation Special belt drive motor, three-phase 7.5 kW, with automatic star-delta starting and reverse current braking Special sanding shoe system allows for surface sanding while adapting to workpiece tolerances via adjustable air pressure Time-controlled deployment of the sanding shoe over the entering edge of the workpiece, adjustable via timer Workpiece feed via high-grip conveyor belt driven by rubber-coated feed rollers, immersion-controlled via non-contact sensor and pneumatic cylinder (independent of workpiece thickness) Feed speed approx. 10 m/min Feed unit guided in a stable linear rail Emergency stop function in case of intervention in workpiece feeding, belt breakage, door opening, or air pressure drop Extraction ports with connection diameter 2x150 mm Dimensions (L x W x H): 1400 x 1300 x 2000 mm Weight: 950 kg Voltage: 400V, 50Hz, 3-phase, air pressure 6 bar CE-compliant version Optional accessories: ----- Heavy-duty roller conveyor, HBS 500 mm wide, 2 m long Ball-bearing support rollers, diameter 60 mm, galvanized steel tube with 12 mm spring axle, load capacity per roller 80 kg, roller pitch 250 mm, roller width 500 mm, height-adjustable support feet per meter, conveyor height 850 mm +/- 60 mm Roller cover according to HBG (required for machines with automatic feed) Price: On request! LÖWER service, flat-rate commissioning instructions Transport, commissioning, and training (excluding electrical and extraction connections), flat rate Nodpeytx Ufofx Ah Ijwd Net price, no deductions Price: On request! (Technical data as per manufacturer – subject to change without notice!)

Stanje: rabljeno, Leto izdelave: 1989, Wheel diameter - max. 400 mm Wheel width 275 mm Module - max. 6 Machine dimensions 300x310x245 cm Machine weight approx. 5.0 t Specification: - Maximum wheel diameter: 400 mm - Min module: 1 - Max module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter support: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm Nwedeu A I Eljpfx Ah Ijd - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Infinitely variable axial feed: 0.2-10 mm/rev - Infinitely variable tangential feed: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid feed axial: 500 mm/min - Rapid feed tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Mass - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (standard): 2950 mm with DC drive: 3350 mm - Width: 3100 mm - Machine height: 1980 mm Electrical cabinet approx.: 2400 mm Machine with DC drive approx.: 2150 mm

Stanje: rabljeno, Leto izdelave: 2005, _____Prodajamo 1 rabljen Fiedler čelni izdelek Frontauslegemaeher FFA 400 letnik 2005. Oprema: montažna plošča velikost 3, pomični okvir 1900 mm z verigo, hidravlične cevi in plosko tesnilne hidravlične spojke, univerzalno držalo za upravljalno konzolo, univerzalna utež 800 kg. Dodatne podrobnosti na zahtevo. Skladišče: 93095 Hagelstadt Nsdpfxsyq Aw Ee Ah Iswd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, AMIX Line for Processing Thin Roundwood – Pallet Block Production (IN OPERATION) For sale: Fully operational and well-maintained AMIX saw line (Poland), designed for efficient processing of thin roundwood and dedicated to the production of pallet blocks/components. --- 📏 Input Material: - Diameter: 8 – 45 cm - Length: 2 – 4.5 m --- ⚙️ The line includes: - Automatic loading ramp (6 m × 3 m) - Log turner (for curve alignment) - Cant saw 2 × 30 kW with chipping system - Automatic side-boards, offcuts, and waste separation - Conveyor system for side-boards and unedged lumber - Automatic block separator - Block centering conveyor Nodpfoyvlrkjx Ah Iowd - Edger saw 75 kW - Automatic outfeed conveyor behind edger - Belt conveyor (width 2.5 m, length 4 m) - Crosscut saw (4-blade) - Double-shaft edging saw - Material separation after edger - Complete conveyor system for removal of chips and waste 👉 Chipper is not included in the offer --- ✅ Key Advantages: - Very compact and efficient solution - Optimized for thin roundwood - Ideal for pallet block production - Automated material flow - Low staffing requirements (3–4 operators) --- 🚀 Output: - approx. 40 – 60 m³ per 8 hours (depends on log diameter and material quality) --- 🔧 Condition: - Line is currently operating - Possibility to see actual production and performance - Regularly maintained --- 💰 Price: €170,000 (negotiable for serious inquiries) 📍 Location: Slovakia For more information, photos, videos, or to arrange a viewing, please do not hesitate to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ARBURG A 1500 T 2000-400 Vrtljiva miza (29.844 h) (S&P 3792) Leto izdelave: 2015 Obratovalne ure: 29.844 ur Polž: 40 mm Tlak vbrizgavanja: 2000 bar Volumen giba: 201 cm³ Zapiralna sila: 200 t Razmak med stebri: 1500 mm Min. višina orodja: 400 mm Maks. razmik plošč: 700 mm Dimenzije: 4700 x 2100 x 2600 mm Teža: 11.500 kg Priključek: 22 kW Premer mize: 1500 mm, vrtljiva miza z 2 postajama (180°), dvojen izvlek jedra, izpiha naprava, vmesnik za barvni dozirnik, ogrevanje orodja, nova cena cca 250.000 € itd. Nwjdpfjyw N Husx Ah Ijd Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Both units with oscillation: yes Height adjustment: Handwheel Nsdpfx Aov R U Ifsh Iswd Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: novo, Leto izdelave: 2022, Cutting length: 2500 mm Cutting width at rip fence: 1250 mm Cutting width at cross-cut fence: 2550 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital Cutting height display: digital Rip fence position display: digital Cross-cut gauge display: digital Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Nodpfx Aheid Igqs Iewd Machine length: 3400 mm Machine width: 2000 mm Weight: 1000 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at cross-cut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Cross-cut ruler display: digital Saw blade diameter: 400 mm Nwedpfx Ahjhpl Uno Ijd Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1000 kg

Stanje: novo, Leto izdelave: 2024, Power output: 1.35 kW Speed range: 230 – 3100 rpm Number of speed steps: 9 Spindle taper: MT-2 Nedpfx Aeuix Sgsh Iswd Quill travel: 85 mm Spindle distance to column: 140 - 540 mm Table size: 500 x 740 mm / load capacity: 250 kg Head tilt: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Stanje: rabljeno, Leto izdelave: 2012, CNC center Doosan DNM 400 Nwodpfx Ahsyvizps Ied Leto izdelave 2011/12 Krmilnik Heidenhain TNC 530 X-762 mm Y-435 mm Z-510 mm Miza 920x435mm Vreteno max 12.000 o/min Hlajenje skozi vreteno IKZ Magazin za orodje 30 kos Stožec vretena SK40 Merilna sonda BLUM Z masina so vključena orodna držala Iztiskovalec ostružkov LNS Dokumentacija o stroju

Stanje: pripravljen za uporabo (rabljen), Dimenzije brusnega koluta: 175 x 25 mm Hitrost brusnega koluta: 3000 vrt/min Nedpfxsyv Dr Aj Ah Iewd Električni priključek: 220 V, 250 W Potrebni prostor: 400 x 230 x 215 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 669, potovalna razdalja osi X: 560 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, model krmilnika: MSC 502, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 - 650 mm Distance spindle nose to table center: 100 - 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 pos. Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 - 24,000 mm/min Creep feed rate: 0 - 1,260 mm/min MACHINE DETAILS Nwsdjyxm Irepfx Ah Isd Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling unit High-pressure cooling Internal coolant supply Tool magazine: 60 pos. Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: The shaft for loading must be provided by the buyer.

Stanje: rabljeno, prevoženi kilometri: 150.000 km, moč: 375 kW (509,86 KM), prva registracija: 04/2022, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: siv, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2022, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, MERCEDES-BENZ ACTROS 1851 | GIGASPACE | EDITION 2 | LEATHER | PARKED AIR CONDITIONING | STEERING ASSIST | 1 OWNER | FULL SERVICE HISTORY | 1 OF 400 EDITION | MASSAGE SEAT | ACC | ----VEHICLE HISTORY • Video available upon request • German vehicle • Single owner • All maintenance carried out exclusively at Mercedes-Benz • Vehicle operated under maintenance contract VEHICLE EQUIPMENT • Automatic transmission • Cruise control • Active Drive Assist (adaptive cruise with steering assist) • Lane Keeping Assist • Blind Spot Assist Njdpfx Aeyxuumjh Iswd • Active Brake Assist • Hill Start Assist • Parked Air Conditioning • Auxiliary heating • Air conditioning • Leather seats • Business seat (passenger side) • Comfort seats • Massage seats • Heated seats • Ventilated seats • Multifunction steering wheel • Refrigerator (2x XXL) • 2 beds (XXL) • 2x aluminum tanks • Full fairing • Frame protection • Xenon headlights • Roof headlights • Additional lighting (roof, sides, underbody) • Side bars with lighting • Leaf suspension front • Air suspension rear • GigaSpace cab • Limited Edition (1 of 400) FURTHER DETAILS • Vehicle available immediately • Vehicle ready for operation immediately • Excellent condition EXPORT / NOTICE Export sales only against deposit (security) min. €500 – €2,000 For sales to EU and non-EU countries, a minimum deposit of €500.00 / €1,000.00 is required. Export registration EXW possible within 10 minutes (approved exporter). 5-day, 15-day, and 30-day plates as well as 15-day Austrian plates available. Vehicle reservations only accepted via email function. Verbal reservations are not valid. Subject to changes, errors, and prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Tehnični podatki Približne dimenzije na lokaciji (D × Š × V): 8.000 × 2.250 × 2.200 mm Teža (pribl.): Nedeyu Nc Aspfx Ah Iowd 5.600 kg Opis artikla Serijska številka: 42503 Sklepna enota Sila zapiranja: 4.000 kN Dimenzije pritrdilnih plošč: 1.300 × 1.080 mm Min./maks. višina orodja: najmanj 350 mm Največja odprtina: 1.300 mm Vbrizgalna enota Premer polža: 70 mm Prostornina vbrizga: 1.155 cm³ Teža vbrizga: 1.040 g Tlak vbrizga: 1.481 bar Elektro-hidravlična oprema Nazivna moč motorja črpalke: 45 kW

Leto izdelave: 2024, stanje: novo, Everything can be configured according to your requirements; production and delivery times are extremely short. Nwsdpfxofin Hwj Ah Ijd We are happy to provide you with further information upon request. Technical Data: AD-R 60400 Bending force: 400 tonnes Bending length: 6050 mm Clearance between uprights: 5100 mm Stroke: 365 mm Installation height: 630 mm Throat depth: 510 mm Optional throat depths: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y-axis rapid traverse: 120 mm/sec Y-axis working speed: 8 mm/sec Y-axis return speed: 100 mm/sec X-axis working speed: 250 mm/sec R-axis working speed: 140 mm/sec R-axis travel: 250 mm Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight: approx. 35 tonnes With over 60 years of experience in research and production of sheet metal processing machinery, an annual output of 8,000 machines across three highly advanced manufacturing facilities totaling 150,000 m², the Durmazlar Group and its DURMA machines are among the internationally recognized producers in their sector, distributing products to 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH has become an important part of the Central Hessen region. We are your direct expert contact from Durmazlar, providing you with competent advice and support when it comes to sheet metal processing machinery. Our demonstration centre offers you the opportunity to see our machines in operation, experience the superior quality and precise technology of our products firsthand, and receive the best possible advice tailored to your business objectives. Our mission is to be your direct local contact, offering you comprehensive services including training and customer support. We are pleased to support you from Germany— from consultation and purchase to the entire service life of your machine. Our local German branch ensures we are always close by, enabling us to respond quickly and efficiently whenever you need us. Here, we are your reliable partner for technologically advanced sheet metal processing solutions.

Leto izdelave: 2024, stanje: novo, AD-S 40400 PRESS BRAKE Bending force (tons): 400 Bending length (mm): 4050 Distance between columns (mm): 3400 Y-axis rapid speed (mm/sec): 100 Y-axis working speed (mm/sec): 8 Y-axis return speed (mm/sec): 80 Crowning: Motorized Daylight (tool installation height and press penetration depth, mm): 630 Table width (mm): 300 Table height (mm): 1040 Stroke (mm): 365 Throat depth (mm): 510 Support arms: 2 pcs Back gauge finger blocks: Standard with 2 finger blocks Speed of travel X-axis (mm/sec): 350 X-axis travel (mm): 750 R-axis max. speed (mm/sec): 300 R-axis travel (mm): 250 Nwodpfjd Rlk Hex Ah Ijd Motor power (kW): 37 Oil tank capacity (l): 450 Length (mm): 5750 Width (mm): 2110 Height (mm): 3540 Approx. weight (kg): 27,760 X = 650 mm, X, R, Z1, Z2 /AL) CE with manual F. Akas II M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central lubrication: motorized Price is net, plus transport and commissioning We look forward to your inquiry.

Leto izdelave: 2024, stanje: novo, Manufacturer: DURMA Model: AD-R 40400 Year of manufacture: NEW Bending length: 4050 mm Clearance between uprights: 3400 mm Stroke: 365 mm Installation height: 630 mm Throat depth: 510 mm Table height: 1050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis return speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 mm Motor power: 37 kW Length: 5750 mm Width: 2110 mm Height: 3540 mm Weight: approx. 25,000 kg Standard equipment Control unit: CNC Cybelec ModEva 19T CNC-controlled motorized crowning system European tool clamping system, or Durma clamping system upon customer request Extended equipment: Safety system according to CE standard for the EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Backgauge controlled axes: X1, X2, R1, R2, Z1, Z2 Controller: DELEM DA-66T Nwsdpfx Aed Hy Huoh Ijd Choice of Delem 66T – 69T or Durma controller DAM – Durma angle measuring system Hydraulic upper tool clamping: Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping: Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation software AP3 & AP4 bending aids Selectable from 750 mm to 1500 mm Parking area for support arms (1000 mm) TANDEM setup preparation Laser bending line Oil heating Centralized lubrication, manual or motorized Cabinet air conditioning Other machines are available for demonstration at our site in Staufenberg. Further information available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 78.394 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 213142, vpenjalna sila: 400 kN, premer vijaka: 18 mm, delovna prostornina: 23 cm³, Here we offer a well-maintained used injection moulding machine as part of our injection moulding machinery trading services. Nodpox Rvcvjfx Ah Ijwd Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesale dealers in injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 78,394 h Screw and barrel replaced Machine number: 213142 Extras: - Robot interface - High wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Part separator The machine is equipped with retrofitted interfaces for: - Mold temperature - Heating channel - Colour / dosing via Siemens Logo PLC control Language: German - From first ownership - origin Germany Regular maintenance by manufacturer and previous owner. Clamping Unit: Clamping force: 400 kN / 40 tons Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Mould height: min. 200 mm Max. daylight between plates: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection Unit: Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrics: Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning. Loading/Shipping: Free loading onto buyer's truck, or free delivery against reimbursement of freight charges. Available ex-stock Hannover, Germany.

Stanje: rabljeno, Leto izdelave: 1982, Višina konice: 400 mm Razdalja med konicami: 1250/1300 mm Premer nad ležiščem: 440 mm Vretenska odprtina: Priklop vretena: Konus vpetja konjička: 5 MK Vretenske hitrosti: 11,2 - 2240 min⁻¹ Pomiki: vzdolžni/čelni 0,1-2,8/0,05-1,4 mm/obr Navojni koraki: Nwsdpfxjvzn Itj Ah Ijd Električni priklop: 380 V, 11 kW Dimenzije: 3400 x 1400 x 1300/1700 mm Teža: pribl. 2700 kg

Stanje: dober (rabljeno), Leto izdelave: 2011, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, Držalo orodja: HSK 63 Vrtljivi vreteno: 85 Vrtljaji vretena: 20.000 vrt/min Verižni magazin: 60 mest Transporter za odrezke Menjalec palet Sistem za filtriranje hladilne tekočine (KS) Visokotlačno hlajenje skozi vreteno (KS) Nwsdpfsyxffvex Ah Iod

Stanje: dober (rabljeno), Območje reza okroglo/kvadratno: 190/190 x 190 mm Območje reza pri poševnem rezu 45° okroglo/pravokotno: 140/190 x 140 mm Dimenzije žaginega lista: 400 x 32 x 1,5 mm 1 hitrost hoda: 85/min Njdeyvfp Ijpfx Ah Ijwd Pogonski motor: 380 V, 0,37 kW Teža: 126 kg Potreben prostor: 1200 x 600 x 980 mm

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor Inclined Conveyor GF 4920-550-400 Nwedpfxjk Abd Ne Ah Isd RA1606 The Lippert conveyor belt dates from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW-brand motor and MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed for an additional charge upon request. Support stands are not included in the scope of delivery but are optionally available on request. The photos shown were taken while the conveyor system was still installed in a logistics center. Technical Data: Conveyor length (NL): 4920 mm (feed belt + inclining belt with curve and upper straight section) Frame width (NB): 550 mm Belt width (GuB): 400 mm Installation height (BH): 105 mm Support stands: available optionally Conveying speed (v m/s): steplessly adjustable up and down with frequency inverter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 Incline / Decline: adjustable Options available: Support stands Side guides (single or double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For personalized, professional advice, simply contact us. Reach us by phone or e-mail. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor Inclined Conveyor GF 1995-550-400 RA1656 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed on request at an additional cost. Support stands are not included in the scope of delivery; these are optionally available upon request. The photos of the conveyor system were taken while still installed in a logistics center. Technical specifications: Conveyor length (NL): 1995 mm (feeder belt 560mm + inclined belt 1435mm) Nsdpfx Ahok Abd To Ijwd Frame width (NB): 550 mm Belt width (GuB): 400 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): infinitely adjustable via frequency inverter Drive: SEW geared motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 Incline / Decline: adjustable Optionally available: Support legs Side guides, single- or double-sided Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional advice, please don't hesitate to contact us. Simply reach out to us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 1996, Transnorm Belt Conveyor 1880-400-300 RA1391 Nwjdpfx Ahjk Abgco Ied The Transnorm belt conveyor was manufactured in 1996 and is in good used condition. It is equipped with an SEW brand motor. Support stands are not included in the scope of delivery, but are available as an option. Technical Data: Manufacturer: Transnorm Type: TS 1200 Belt Conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional Conveyor length (FL): 1880 mm Nominal / outer width (NB): 400 mm Belt width (GB): 300 mm Motor type: SEW geared motor Motor power: 0.37 kW 220-240V Conveying speed: 1.05 m/s; variable speed with frequency inverter available at extra cost Drive: head drive Scope of delivery: without support stands (please request if required) Optional: support stands Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, please contact us directly. Feel free to contact us by phone or email. We are happy to assist you with the planning and execution of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics