Tbm nakup rabljenega (33)

Stanje: dober (rabljeno), Leto izdelave: 1987, premer struženja nad prečnim suportom: 810 mm, izvrtina vretena: 130 mm, premer struženja: 1.140 mm, stružna dolžina: 7.500 mm, poteza s peresom: 300 mm, skupna dolžina: 7.500 mm, skupna širina: 2.300 mm, skupna višina: 1.650 mm, širina postelje: 600 mm, Please note: these are not original pictures. The length is only 3000 mm, not 5000 mm. 3-guideway bed construction 2-axis Heidenhain digital readout Power feed in 3 directions on all tool post slides Central lubrication Workpiece weight when flying in chuck: 2,500 kg Workpiece weight unsupported: 8,500 kg Workpiece weight supported: 10,000 kg Optional: 4-jaw chuck approx. 1,200 mm Optional: 4-jaw chuck approx. 1,500 mm Optional package with 3 fixed steady rests, for workpieces from ... to ... Turning length: 5,000 / 7,500 mm Swing diameter over bed: Ø 1,140 mm Swing diameter over cross slide: 810 mm Swing diameter in gap: Ø 1,500 mm Gap length: 2,500 mm Spindle bore: 130 mm Bed width: 600 mm Lrodpfx Aev S Dp Iebbjg Quill diameter: 130 mm Quill stroke: 300 mm Spindle taper: 6 Morse taper Motor power: 25 kW Speed range: 9 – 900 rpm Length: 7,500 mm Width: 2,300 mm Height: 1,650 mm Weight: 12,000 kg

Leto izdelave: 2025, Stanje: novo, Automatic packaging machine for filling and packaging tea into double-chamber tea bags. Includes a volumetric doser and labelling system for attaching string and tag. Labelling is performed on both sides (tag-string and string-bag) using a staple. Double-chamber bag formation via cold sealing. Device for grouped bag output. PLC-controlled, operation via touch monitor. Lodjv Nm S Tepfx Abbjrg - Specifications: max. idle machine cycle rate: 130 cycles per minute; dosing volume: max. 10cm³ (adjustable); hopper capacity: 13dm³; accuracy: ±5%; tea bag dimensions LxW: 40x60 / 45x60mm; tea bag material roll width: 94 / 103mm; suitable tea bag material: 12.5g/m², cold-sealable; label (LxW): 28x32mm; string length: 148mm (±5mm); metal staple material diameter: 0.5mm; voltage supply: 220/380V; power consumption: 10kW; required compressed air: 0.6 MPa; compressed air consumption: 300l/min; machine dimensions LxWxH: 3500x1500x2400mm; weight: 4250kg.

Stanje: novo, Leto izdelave: 2025, Automatic packaging machine for filling and packing tea into double chamber tea bags. Includes volumetric dosing unit and labeling system for attaching the thread with label. Labeling takes place on both sides (label-thread and thread-bag) using a staple. Double chamber bag is formed by cold sealing. Device for grouped bag discharge. PLC controlled, operation via touch monitor. - Specifications: max. machine cycle speed (idle): 130 cycles per minute; dosing volume: max. 10cm³ (adjustable); hopper capacity: 13dm³; accuracy: ±5%; tea bag dimensions LxW: 40x60 / 45x60mm; film width for tea bag material: 94 / 103mm; suitable tea bag material: 12.5g/m², cold-sealable; label (LxW): 28x32mm; thread length: 148mm (±5mm); metal staple diameter: 0.5mm; power supply: 220/380V; power consumption: 10kW; necessary compressed air: 0.6 MPa; compressed air consumption: 300l/min; machine dimensions LxWxH: 3500x1500x2400mm; weight: 4250kg. Lrjdpfx Ajv Nlhgebbjg Please note that our new machine prices are often below the usual used machine prices. Just send us your enquiry and let us know your packaging application. – Typically, 30-50 different new machines are always available for immediate delivery from stock. For machines manufactured to customer specification, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic packaging machine for filling and packaging tea into single-chamber tea bags. Includes volumetric dosing unit and labelling system for attaching the string with label. Labelling system: In the standard version, the label is folded and glued together with the inserted string. Optionally, a heat-sealing module is available for this production step. Method for attaching the string to the tea bag: By heat sealing into the edge of the tea bag. The output of the tea bags takes place in stacks, e.g. into a tray or into an already erected tea packaging. - Specifications: - Max. machine cycle rate (idle): 120 cycles per minute - Dosing volume: max. 6 cm³ - Tea bag dimensions (LxW): 62.5x50 mm - Roll width of tea bag material: 125 mm - Suitable tea bag material: 16.5-20g/m², heat-sealable on one side - Label (LxW): 28x24 mm - String length: 210 mm - Output stack quantity: a) 25 / 50 / 100 b) 30 / 60 c) 20 / 40 - Power supply: 380V - Power consumption: 1.5kW - Machine dimensions (LxWxH): 1700x900x2000 mm - Weight: 640 kg Lredpfx Aov Nlikjbbjg Please note that our new prices are often below standard used prices. Feel free to inquire and let us know your packaging requirements. Usually, 30-50 different new machines are immediately available from stock. In addition, we offer very short delivery times from approx. 3 weeks for machines made to customer specification. All machines are available with full warranty.

Leto izdelave: 2025, Stanje: novo, Automatic packaging machine for filling and packing tea into single-chamber tea bags. Includes volumetric dosing unit and a labeling system for attaching the string with a tag. Labeling system: In the standard version, the label is folded and glued together with the inserted string. Optionally, a heat-sealing module is available for this production step. Method for attaching the string to the tea bag: by heat-sealing into the edge of the tea bag. The tea bags are discharged in stacks, e.g., into a tray or into pre-erected tea packaging. - Specifications: max. machine cycle speed (idle): 120 cycles per minute; dosing volume: max. 6 cm³; tea bag dimensions (LxW): 62.5 x 50 mm; roll width for tea bag material: 125 mm; suitable tea bag material: 16.5-20 g/m², heat-sealable on one side; tag (LxW): 28 x 24 mm; string length: 210 mm; stack output quantities: a) 25 / 50 / 100, b) 30 / 60, c) 20 / 40; power supply: 380 V; power consumption: 1.5 kW; machine dimensions (LxWxH): 1700 x 900 x 2000 mm; weight: 640 kg. Lrsdpfx Absv Nm R Asbog

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 3,5 kW (4,76 KM), vrsta prenosa: samodejen, vrsta goriva: električni, barva: originalen, skupna masa: 3.500 kg, Leto izdelave: 2025, obratovalne ure: 1 h, številka stroja/vozila: MZatbm01, Oprema: CE označba, Ta avtomatski stroj za pihanje plastenk, ki vam ga danes predstavljamo, je vrsta instrumentalne opreme za proizvodnjo plastičnih plastenk. Zmožen je pretvoriti plastične granule ali že pripravljene predoblike v plastične steklenice različnih velikosti in oblik preko avtomatiziranega procesa. Uresničimo lahko katerikoli izdelek, ki ga želite. Stroj združuje mehanske, elektronske in pnevmatske tehnologije in je zelo inteligenten. Ne glede na to, ali gre za podajanje predoblik, segrevanje, raztezanje, pihanje ali izmet končnih plastenk, vse lahko opravi ena sama ta naprava, brez večjega človeškega posega, kar vam ne le pomaga znižati stroške dela, temveč prav tako bistveno izboljša proizvodno učinkovitost in zagotavlja stabilnost kakovosti izdelka. Lrsdoxx Ndgepfx Abbsg

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0005378 - Manufacturer Code: TBM 1.2-40-W1-220 - Condition: Used - Functionality: Not tested - If interested, we offer overhaul service; please contact us. Ledpfownpffex Abberg

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0005378 - Manufacturer Code: TBM 1.2-40-W1-220 - Condition: Used - Functionality: Not tested. If interested, we offer an overhaul service—please contact us. Lrsdpfov Efkyox Abbjg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, TBM-D 2009006 – Škatla za senzor položaja / Lagesensorbox V3 Proizvajalec: TBM SW-Entwicklung und Elektronik GmbH (Nemčija) Datum izdelave: 02/2024 Napajanje: 12 V DC, poraba 70 W Stanje: rabljeno, zelo dobro, brezhibno Profesionalna merilna / krmilna škatla, zasnovana za industrijsko uporabo. Naprava služi za upravljanje in obdelavo signalov iz pozicijskih senzorjev v testnih sistemih, avtomatizaciji in raziskovalno-razvojnih postajah. Lrjdsyc H R Topfx Abbjg Oprema in lastnosti: • LCD zaslon za prikaz parametrov • številčna tipkovnica za konfiguracijo in upravljanje • Komunikacijski vmesnik D-Sub • 12 V napajalne vtičnice • Robustno aluminijasto ohišje • CE oznaka • enota po pregledu (kontrolne nalepke TBM)

Stanje: dober (rabljeno), 1 x TBM Tecnopast spiralni mešalec za testo z dvižnima rokama, kapaciteta 350 kg, z 3 kotli. Opremljen z dvižnimi koleščki. Stroj je imel leta 2015 popolnoma obnovljeno krmilno omarico z vgrajenimi sodobnimi komponentami. Tehnične specifikacije: Proizvajalec: TBM Tecnopast Bakery Machines S.P.A. Model: T500 ETT Lrjdpfsw Aduksx Abbsg Kapaciteta: 350 kg (testo) in 225 kg (moka) Vgrajena moč: 11,6 kW.

Stanje: rabljeno, completely stainless steel electrically heated 386.40 kW upper and lower conveyor belt Lodpfx Ajycqrbjbborg roasting length: 8,000 mm track width: 630 mm infinitely variable speed oil pump suitable for fire protection dirt conveyor electric lifting device overall dimensions (L x W x H): approx. 11,550 x 1,700 x 2,900 mm

Stanje: pripravljen za uporabo (rabljen), Servo frekvenčni pretvornik REXROTH Lredpfx Asx Nmnasbbjg Rexroth Indramat prej je bil vgrajen v DIMTER kapno žago

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Dodatna oprema 1 kos 3-barvne signalne luči Dodatna naprava za vstavljanje tamperja in stiskalnih letev Avtomatska vrata za nakladalno postajo Lrsdpsx D R Nhefx Abbjg Ta vrtalni stroj SFT TBM 3-1500 je bil izdelan leta 2007. Če iščete visokokakovostne možnosti vrtanja, razmislite o našem stroju SFT TBM 3-1500, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Področja uporabe Drugi obdelovalni stroji

Stanje: zelo dobro (rabljeno), Technical Data: - Min. drilling diameter: 16 mm - Max. drilling diameter: 35 mm - Reaming diameter: 65 mm - Max. drilling depth: 1,400 mm using ELB/BTA process - Machine footprint approx. 6,100 x 3,100 mm - Max. machine height: 2,400 mm - 2 separate drilling units mounted on the base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw spindle and feed gearbox - Rapid traverse speed: 4,000 mm/min - Max. feed rate: 230 mm/min - Drive power (2 drilling spindles): 11 kW each - Stepless spindle speed up to max. 6,000 rpm Lodpjwq I Iqefx Abbjrg - Hydraulically clamping tailstock with counter-rotation - Tailstock manually adjustable on base plate with longitudinal T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotatable clamping bell mount (base mount) each - 2 pre-centring units each - Drilling depth control via cam and limit switch - CNC control SFT and FU, power supply 380 V / rated current 80 Amp. - Each unit has its own control system and dedicated feed motor With this machine, you are essentially getting two single-spindle machines, as each spindle is operated separately with its own control system and feed motor. We see ourselves as a competent partner in the field of deep hole drilling. We are also happy to receive inquiries for subcontracted deep hole drilling operations. Please feel free to contact us for any questions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, The deep hole drilling machine is in very good condition! Deep Hole Drilling Machine Type TBM 120-2000 Drilling System: BTA Drilling Range (solids): 30–130 mm Max. Counterboring: 170 mm Max. Drilling Depth: 2000 mm Max. Workpiece Size: 2800 / 3000 mm, depending on external dimensions. Drill spindle headstock with two-speed gearbox, electrically switchable. Selectable rotating / stationary tool Main spindle headstock (tailstock) with two-speed gearbox, electrically switchable Tailstock with or without counter-rotation selectable Hydraulic chuck Main spindle block with two-stage gearbox Drive motor: Drive Ax AC motor, 37 kW, with brake for spindle locking, 1200–1500 rpm Drill spindle block with two-speed gearbox Stepless speed control for main and drill spindle Machine bed constructed as a welded structure Linear roller guideways, size 65 Drill slide movement via ballscrew, gearbox and 3 kW servomotor, rapid traverse max. 3000 mm/min Feed max. 1000 mm/min Hydraulically positionable drill bush holder Lrsdpfx Aehwhx Hjbbeg 2 steady rests, attachable 2 roller centering devices D20–100 mm 2 Boza drilling ranges D8–200 mm With chip trough and extraction pump Scraper conveyor Full enclosure with sliding doors on the operator side 1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle Torque monitoring for drill spindle and feed with percentage display We also consider ourselves a competent partner for contract deep hole drilling. We will be happy to provide you with an offer! Feel free to contact us!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, The deep hole drilling machine is in excellent condition! Deep Hole Drilling Machine Type TBM 120-2000 BTA Drilling System Lrodpfx Asq A S Ekjbbjg Drilling Range, Solid Drilling: 30-130 mm Maximum Counterboring: 170 mm Maximum Drilling Depth: 2000 mm Maximum Workpiece Size: 2800 / 3000 mm, depending on external dimensions. Drill spindle headstock with two-speed gearbox, electrically switchable. Selectable rotating / stationary tool. Main spindle headstock (tailstock) with two-speed gearbox, electrically switchable. Tailstock with optional counter-rotation, can be operated with or without counter-rotation. Hydraulic chuck. Main spindle block with two-stage gearbox. - Drive motor: Drive Ax AC motor, 37 kW, with brake for spindle locking, 1200-1500 rpm - Drilling spindle block with two-speed gearbox. Stepless speed adjustment for main and drilling spindles. Machine bed, fabricated welded construction. Guideways with linear roller design, size 65. - Drilling carriage movement via ball screw, gearbox and 3 kW servomotor, rapid traverse max. 3000 mm/min. Maximum feed: 1000 mm/min. Hydraulically positionable drill bush holder. 2 x steady rests, attachable. 2 x roller centering units D20-100mm. 2 x Boza, drilling range D8 - 200 mm. With chip trough and extraction pump. Scraper conveyor. Fully enclosed guarding with sliding doors on the operator side. Single-axis CNC control PS 100 SFT for control and monitoring of the drilling cycle. Torque monitoring for drill spindle and feed, displayed as a % value. We are also a competent partner for contract deep hole drilling services. We are happy to provide you with an offer! Contact us with your enquiry!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, obratovalne ure: 428 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 428, globina vrtanja: 400 mm, največja hitrost vretena: 23.700 obr/min, premer vrtanja: 6 mm, število vreten: 1, dolžina obdelovanca (maks.): 450 mm, No reserve price – guaranteed sale to the highest bidder! The machine has only 428 operating hours! TECHNICAL DETAILS Control system: SFT TBS 200 Drilling method: single-lip deep hole drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with retractable spindle: 120 mm Drilling depth with sealing unit only: 400 mm Sealing unit with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid feed: 4,000 mm/min Spindle drive: Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock: Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Feed carriage drive: Type: ball screw 25 × 5 mm with servo motor Drill bush holder and chip removal: Lsdpfowu Eb Asx Abbjrg Drill bush holder: rigidly mounted on machine bed Components: drill bush holder and sealing unit by BOTEK Chip removal: downward into chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system: Tank capacity: approx. 500 l Filtration: integrated paper band filter Coolant pump: one-piece with frequency converter Delivery rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulic tailstock (can be engaged) - Manual tailstock adjustment for various workpiece lengths - Drill bush holder and sealing unit by BOTEK - Direct chip removal into collection container - Integrated coolant system with paper band filter - Complete with deep hole drilling tool and technical documentation Transport possible with standard truck

Stanje: rabljeno, “Stork” Infeed Conveyor - Fully constructed from stainless steel - Mesh belt - Track width: 400 mm - Dimensions (L x W x H): approx. 1,400 x 700 x 900 mm - Mobile “Marel Townsend” Fryer - Type: TBM 400/4000 TH - Fully constructed from stainless steel - Suitable for thermal oil heating - Top and bottom belts Lodpfswwh D Eex Abberg - Frying length: 4,000 mm - Track width: 400 mm - Continuously adjustable speed - Teflon infeed belt - Oil pump - Electric lifting device - Overall dimensions (L x W x H): approx. 7,100 x 1,500 x 2,900 mm

Stanje: rabljeno, Proizvajalec: TBMA Europe BV Model: H-AR 150 Tip: Rotacijski ventil Zunanji premer: 300 mm Nazivni premer: 150 mm Moč motorja: 0,25 kW Lodpfxsx R Ax Ds Abbsrg Material rotorja: nerjaveče jeklo

Leto izdelave: 2003, Stanje: rabljeno, Proizvajalec: TBMA Model: H-AR 300 Leto: 2003 Ledpfx Absx R Axqebsrg Tip: rotacijski ventil Zunanji premer: 450 mm Nazivni premer: 300 mm Moč motorja: 0,75 kW

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 100 h, številka stroja/vozila: BMWF241003, We are pleased to present a unique offer for a CNC lathe. The featured machine is the FAT TUR 630MN x 2000, manufactured in 2001, which underwent a complete overhaul in 2024. The lathe is equipped with a new SIEMENS 828D control system. Its user-friendly programming environment, together with process simulation capabilities and integrated documentation, allows for significantly reduced setup times when introducing new parts into production. As a result, we are offering a machine tool with all the attributes of a modern CNC machine at an attractive price. At the same time, we provide comprehensive customer support, including machine commissioning and integration, warranty and post-warranty service, operator and programming training, as well as assistance in technology implementation and parts production. Main features of the TUR MN lathe: • European standard – the lathe is built from top-quality components. • Rigid and wide machine bed – provides high rigidity, resulting in excellent surface finish quality. • Hardened and ground components – the bed and gearwheels are hardened and ground for increased durability. • Precision ball screws – ensure high machining accuracy. • Spindle head – two-stage, up to 2500 rpm, with high torque for precise and heavy-duty machining. • Control system – new Siemens 828D controller. • Enclosed working area – ensures operator safety and comfort. Machine operating modes: • Manual mode (JOG) – mainly used for setting up the machine, tool measurement, workpiece preparation, process planning, and simple turning operations. • Semi-automatic mode (MDI) – enables command sequence execution via G-code in a command line format. Ljdpfx Abov R Dlyobjrg • Automatic mode (Auto) – fully automated operation based on a generated G-code program, utilizing machining cycles and/or contour drawings with defined part and process parameters. Key operator interface features: • User-friendly and intuitive control system with integrated documentation. • Saving and loading files via USB port. • Graphical machining simulation before and during the turning process. • Contour turning – ability to draw part shapes on the control panel using basic geometric elements (lines, curves, arcs) and calculate undefined paths. • Machining using cycles, contours, and/or G-code within a single program, with subroutine capability. • Executing programs compliant with ISO/DIN coding standards. Scope of the overhaul: • Bed grinding. • Renovation of slides and carriage (new sliding coatings). • Machine geometry adjustment (scraping). • Replacement of all bearings (spindle head, X-axis, Z-axis, tailstock). • Replacement of X and Z axis ball screws. • Complete replacement of the lubrication system. • Replacement of drive belts. • Installation of new Siemens motors for X and Z axes. • Installation of new Siemens 828D control system. • Complete rewiring, including control cabinet components. • Tailstock inspection. • Repainting of the machine. • Replacement of worn mechanical components (spindle head gears).

Stanje: rabljeno, TBMA Galahad bag emptying installation, stainless steel bag emptying machine Type: 750 special Lrodpowvli Aofx Abbjg All parts which come into contact with the product are made of stainless steel (RVS). Other parts are coated. The machine is in used condition and is sold as is. Includes various feed conveyors Optional: empty bag screw compactor Optional: pallet tipper with lift table Capacity: 400 bags/hour See our other listings VMA Wekerom

Stanje: rabljeno, Leto izdelave: 2011, Technical details: Tube diameter: 60 mm Wall thickness: 3.0 mm Minimum bending radius: 20 mm Maximum tube diameter: 60 mm Maximum wall thickness: 3.0 mm Tube feed length: 1500 mm Maximum bending angle: 180° + springback Operating hours: approx. 34,797 h Total power requirement: 55 kW Machine weight approx.: 8.0 t Machine dimensions (LxWxH): 6.3 x 3.3 x 1.9 m Control cabinet dimensions (LxWxH): 2.7 x 0.7 x 2.0 m Ledpfx Abex Sll Aebjrg Device dimensions 1: Control panel: 0.9 x 0.6 x 1.85 m Device dimensions 2: Tube magazine: 1.8 x 2.4 x 1.75 m This is an automatic cold tube bending machine. Multiple radii can be bent. Radii differences can be freely programmed via CNC control in up to 6 layers (manufacturer’s specification). Tube positioning unit in NTB version Tube diameter: Min. tube Ø: 16 mm Max. machine capacity tube Ø x wall thickness: Mild steel = Ø 60x3 mm, Stainless steel = Ø 57x2 mm Bending radius to tube center: Min. Ø 20 mm Max. Ø 200 mm Bending direction is to the left. Maximum tensile strength of the material to be bent: Stainless steel 750 N/mm² Mild steel 450 N/mm² Maximum bending speed: FORWARD, infinitely adjustable / programmable: 22.0 1/min. RETURN, constant: 22.0 1/min. Height adjustment for multiple radii: Lowest tube centerline 55 mm Height travel suitable for 3-groove bending tools Twisting: Max. twist angle 360°; Speed 50 min-1 -Gripper -Tube magazine Schwarze-Robitec, tube length min./max.: 400 / 1500 mm, tube outer Ø min./max.: 28 / 60 mm -Hydraulic capacity 340 liters -Hydraulic system for: bending table drive; tool clamping; pressure on guide rails, directly acting; reinforced guide rail feed and return; mandrel retraction unit -Operator panel/control panel from Schwarze Robitec -2x foot pedal control -Cooling unit on control cabinet Rittal, type SK 3361100 Accessories: Various bending tools for Ø 60 mm tube Various auxiliary equipment As per scope of delivery/inventory

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 34.797 h, številka stroja/vozila: 2011-0250, Premer cevi (maks.): 600 mm, Dolžina cevi (maks.): 1.500 mm, Kot upogiba (maks.): 180 °, radij upogibanja (maks.): 200 mm, debelina stene: 3 mm, Original machine year of manufacture: 1996. Completely overhauled by the manufacturer in 2011 at a cost of approx. €250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feed length: 1,500 mm Ledpfx Absx Srkljbsrg Bending angle: max. 180° + springback Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion parameters Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Rotation angle: max. 360° Rotational speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Operator console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic tank volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operator and control console EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic drive for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (2-way) - Schwarze-Robitec operator console - Rittal control cabinet cooling unit type SK 3361100 Note: Due to lack of operator knowledge, the machine could only be tested in setup mode. No faults are known. The machine is currently dismantled.

Stanje: dober (rabljeno), Leto izdelave: 1980, premer struženja nad ležiščem sani: 1.040 mm, premer struženja nad zgornjim sanežem: 710 mm, stružna dolžina: 2.000 mm, širina postelje: 600 mm, Mandrin optional Ø 1200 mm Affichage numérique RSF 2 axes Dispositif de tournage conique Alésage de broche 130 mm Lubrification centralisée Lrjdpfjx Tgr Tex Abbeg Longueur de tournage : 2000 mm Diamètre de tournage au-dessus du banc Ø : 1040 mm Diamètre de tournage au-dessus du chariot transversal : 710 mm Diamètre de tournage dans le rompu Ø : 1780 mm Longueur du rompu : 1000 mm Alésage de broche : 130 mm Largeur du banc : 600 mm Diamètre de la contre-pointe : 130 Ø Course de la contre-pointe : 300 mm Nez de broche : 6 cône Morse Puissance : 22 kW Vitesse : 600 tr/min Avance axe X : 4000 mm/min Avance axe Z : 4000 mm/min Longueur : 6000 mm Largeur : 2100 mm Hauteur : 2100 mm Poids : 8300 kg Veuillez noter : Les informations contenues sur cette page ont été collectées au mieux de nos connaissances et, dans la mesure du possible, obtenues auprès du fabricant. Les informations sont données de bonne foi mais leur exactitude ne peut être garantie. Elles ne constituent donc pas une garantie ou une condition contractuelle. Nous vous recommandons de vérifier toutes les informations essentielles.